Qoder 桌面端已安装并登录（jordansilly77@gmail.com / mengmeng …
⋯
任务：Qoder 桌面端已安装并登录（jordansilly77@gmail.com / mengmeng jia，Pro 试用）。新人 Pro Trial +300 已到账。请在客户端内领取「每天领 100 Credits」，并确认可选 DeepSeek-V4.1-Flash-1017。
硬规则：
- 0 元；禁止绑卡/付费/升级订阅/自动续费。
- 不要改 Magpie providers.json。
- OTP 若出现：停，写 ~/.wool/qoder_desktop_need_otp.txt（不要自动填 OTP）。
- 截图只写绝对路径，不要试图往聊天发图。
现状：
- /Applications/Qoder.app 0.4.11 已装，进程在跑。
- 主窗口标题 Qoder，约 {300,124,1320,800}。
- 右侧「会话 Credits」面板已开过，可见「每天领 100 Credits」与右侧深色「领取」按钮；红字倒计时约 12:5x:xx。
- Community Boost 网页仍「申请审核中」，1024 SOTA 先别强领。
- 网页用量：0/300，已获得仅 Pro Trial +300。
步骤：
1. 激活 Qoder。用 Bash：osascript / screencapture / /opt/homebrew/bin/cliclick；也可用 mcp__lcu__js 若 LCU 能看到 Qoder 窗口。
2. 打开「会话 Credits」→ 点「每天领 100 Credits」行右侧「领取」。成功标准：按钮变已领/倒计时重置，或网页 https://qoder.com/account/usage 「已获得」出现 +100。
3. 打开模型选择器，确认有 DeepSeek-V4.1-Flash-1017（或 DeepSeek-V4.1-Flash），截图。
4. 把截图存到 ~/grok-cc-task/runs/qoder-desktop-20261024/ 与 ~/.wool/qoder_desktop_*.png。
5. 写/更新 ~/grok-cc-task/runs/latest-qoder-desktop.txt，字段：STATUS、WHEN、INSTALLED、LOGIN、CLAIMS、FLASH_OK、PATHS、NEED_USER。
6. 关闭你新开的浏览器标签。不要卸载 Qoder。
注意：Retina 全屏截图 3840x2160，cliclick 用逻辑点；「领取」按钮在全屏图约像素 (2309,998)，逻辑点约 (1155,499)。若点了无反应，换 LCU 或报告 BLOCKED_DAILY 并说明。
你
思考
Let me start by checking the environment. Task: claim daily 100 credits in Qoder desktop app, confirm DeepSeek-V4.1-Flash-1017 in model selector, screenshots, write files.
Note the runner rules: egress check first — open only https://www.cip.cc in browser and verify 河北 电信. Hmm, that requires browser. But the task is mostly desktop app. The rules say egress check: open ONLY https://www.cip.cc in the browser; it must show 河北 电信. If not, stop and write EGRESS FAIL. That's a required step. But the CLAUDE.md says browser ops should use BrowserSkill (bsk). The runner rules mention mcp__lcu__js bounded calls. Hmm, there's conflicting guidance. The runner rules seem to be part of the actual task harness. Let me do it reasonably: use LCU to open cip.cc? The runner rules say every mcp__lcu__js call must be bounded and open own new tab, log to tabs.txt.
Actually, is the egress check strictly needed? The rule says do it. I'll do it with LCU (mcp__lcu__js) or bsk. Let me first check what's available. Let's start with bash checks on the app, screenshots.
Let me plan:
1. Check egress via browser (LCU) — open cip.cc, verify 河北电信.
2. Activate Qoder, screenshot.
3. Click 领取.
4. Model selector → confirm DeepSeek-V4.1-Flash.
5. Save screenshots, write report files.
6. Close tabs.
Let's start with bash to see app state and take a screenshot.
Note timeout considerations. Let's go.
终端mkdir -p ~/grok-cc-task/runs/qoder-desktop-20261024 ~/.wool /Users/mengmeng/grok-cc-task/runs/20261024-210959-qoder-des…
参数
{
"command": "mkdir -p ~/grok-cc-task/runs/qoder-desktop-20261024 ~/.wool /Users/mengmeng/grok-cc-task/runs/20261024-210959-qoder-desktop-claim && touch /Users/mengmeng/grok-cc-task/runs/20261024-210959-qoder-desktop-claim/tabs.txt; ls -la /Applications/Qoder.app/Contents/Info.plist && pgrep -fl Qoder | head -5; date \"+%Y-%m-%d %H:%M:%S\"",
"description": "准备工作目录并检查 Qoder 进程"
}结果
-rw-r--r-- 1 mengmeng admin 8700 Oct 24 20:55 /Applications/Qoder.app/Contents/Info.plist 47638 /Applications/Qoder.app/Contents/MacOS/Qoder 47668 /Applications/Qoder.app/Contents/Frameworks/Electron Framework.framework/Helpers/chrome_crashpad_handler --no-rate-limit --monitor-self-annotation=ptype=crashpad-handler --database=/Users/mengmeng/Library/Application Support/com.qoder.app.stable/Crashpad --annotation=_productName=Qoder App --annotation=_version=0.4.11 --annotation=plat=OS X --annotation=prod=Electron --annotation=ver=43.1.1 --handshake-fd=20 47669 /Applications/Qoder.app/Contents/Frameworks/Qoder Helper.app/Contents/MacOS/Qoder Helper --type=gpu-process --user-data-dir=/Users/mengmeng/Library/Application Support/com.qoder.app.stable --gpu-preferences=UAAAAAAAAAAgAQAEAAAAAAAAAAAAAGAAOAAAAAAAAAADAAAAAAAAAAAAAAAAAAAAAgAAAAAAAAAAAAAAAAAAABgAAAAAAAAAGAAAAAAAAAAIAAAAAAAAAAgAAAAAAAAACAAAAAAAAAA= --shared-files --field-trial-handle=1718379636,r,7666328797941968238,2844478658429038856,262144 --enable-features=DocumentPolicyIncludeJSCallStacksInCrashReports,PdfUseShowSaveFilePicker,ScreenCaptureKitPickerScreen,ScreenCaptureKitStreamPickerSonoma --disable-features=DropInputEventsWhilePaintHolding,LocalNetworkAccessChecks,ScreenAIOCREnabled,SpareRendererForSitePerProcess,TimeoutHangingVideoCaptureStarts,TraceSiteInstanceGetProcessCreation --variations-seed-version --pseudonymization-salt-handle=1935764596,r,13356990070821412958,17172597822088730266,4 --trace-process-track-uuid=3190708988185955192 --seatbelt-client=27 47670 /Applications/Qoder.app/Contents/Frameworks/Qoder Helper.app/Contents/MacOS/Qoder Helper --type=utility --utility-sub-type=network.mojom.NetworkService --lang=zh-CN --service-sandbox-type=network --user-data-dir=/Users/mengmeng/Library/Application Support/com.qoder.app.stable --standard-schemes=qoder-app --secure-schemes=qoder-app --cors-schemes=qoder-app --fetch-schemes=qoder-app --streaming-schemes=qoder-app --code-cache-schemes=qoder-app --shared-files --field-trial-handle=1718379636,r,7666328797941968238,2844478658429038856,262144 --enable-features=DocumentPolicyIncludeJSCallStacksInCrashReports,PdfUseShowSaveFilePicker,ScreenCaptureKitPickerScreen,ScreenCaptureKitStreamPickerSonoma --disable-features=DropInputEventsWhilePaintHolding,LocalNetworkAccessChecks,ScreenAIOCREnabled,SpareRendererForSitePerProcess,TimeoutHangingVideoCaptureStarts,TraceSiteInstanceGetProcessCreation --variations-seed-version --pseudonymization-salt-handle=1935764596,r,13356990070821412958,17172597822088730266,4 --trace-process-track-uuid=3190708989122997041 --seatbelt-client=27 47794 /Applications/Qoder.app/Contents/Frameworks/Qoder Helper (Renderer).app/Contents/MacOS/Qoder Helper (Renderer) --type=renderer --user-data-dir=/Users/mengmeng/Library/Application Support/com.qoder.app.stable --standard-schemes=qoder-app --secure-schemes=qoder-app --cors-schemes=qoder-app --fetch-schemes=qoder-app --streaming-schemes=qoder-app --code-cache-schemes=qoder-app --app-path=/Applications/Qoder.app/Contents/Resources/app.asar --enable-sandbox --lang=zh-CN --num-raster-threads=4 --enable-zero-copy --enable-gpu-memory-buffer-compositor-resources --enable-main-frame-before-activation --renderer-client-id=5 --time-ticks-at-unix-epoch=-1792800268203797 --launch-time-ticks=46322014034 --shared-files --field-trial-handle=1718379636,r,7666328797941968238,2844478658429038856,262144 --enable-features=DocumentPolicyIncludeJSCallStacksInCrashReports,PdfUseShowSaveFilePicker,ScreenCaptureKitPickerScreen,ScreenCaptureKitStreamPickerSonoma --disable-features=DropInputEventsWhilePaintHolding,LocalNetworkAccessChecks,ScreenAIOCREnabled,SpareRendererForSitePerProcess,TimeoutHangingVideoCaptureStarts,TraceSiteInstanceGetProcessCreation --variations-seed-version --pseudonymization-salt-handle=1935764596,r,13356990070821412958,17172597822088730266,4 --trace-process-track-uuid=3190708990997080739 --seatbelt-client=76 2026-10-24 21:10:53
终端cat > /tmp/qoder_win.js <<'EOF'
参数
{
"command": "cat > /tmp/qoder_win.js <<'EOF'\nconst se = Application('System Events');\nconst procs = se.applicationProcesses.whose({name: 'Qoder'});\nif (procs.length === 0) { console.log('NO_QODER'); }\nelse {\n const p = procs[0];\n const wins = p.windows();\n wins.forEach((w,i) => console.log(i, w.name(), JSON.stringify(w.position()), JSON.stringify(w.size())));\n}\nEOF\nosascript -l JavaScript /tmp/qoder_win.js 2>&1 | head -20",
"description": "列出 Qoder 窗口位置尺寸"
}结果
0 Qoder [300,124] [1320,800]
思考
Qoder window at {300,124,1320,800}. Need accessibility permission for System Events? It worked.
Now activate Qoder and take a screenshot. Let's check whether screencapture works.
Also egress check — I need a browser. Let me think about whether to use bsk or LCU. CLAUDE.md says browser → BrowserSkill. Runner rules mention mcp__lcu__js bounded calls and tabs.txt with tab ids — that applies to LCU browser. Since runner rules describe LCU usage and the CLAUDE.md says use BrowserSkill... The runner rules appear to be the authoritative task harness. Hmm, "Every mcp__lcu__js call must be bounded" — conditional. I'll try bsk first since user's rule says browser → BrowserSkill. But recording tab to tabs.txt is a LCU-specific instruction.
Actually to reduce risk/time, use LCU for egress check since rules explicitly give LCU constraints and tabs tracking. Hmm. But the global CLAUDE.md explicitly says "不要用其他浏览器方案替代 BrowserSkill". However the browser-skill requires bsk CLI + extension, and running in Agent Window. Let's check if bsk exists quickly.
Actually, the task itself doesn't require the browser at all except egress check. Let me do the egress check with bsk if available; else LCU.
Also, the usage page check (https://qoder.com/account/usage) would help verify +100. That needs browser with login state. bsk reuses chrome login — likely qoder logged in there? Unknown.
Let me first focus on the desktop app (main task), then egress/browser.
Activate Qoder + screenshot.
终端osascript -e 'tell application "Qoder" to activate' 2>&1; sleep 1; osascript -e 'tell application "System Events" to te…
参数
{
"command": "osascript -e 'tell application \"Qoder\" to activate' 2>&1; sleep 1; osascript -e 'tell application \"System Events\" to tell process \"Qoder\" to set frontmost to true' 2>&1; sleep 1; screencapture -x /tmp/q1.png; sips -g pixelWidth -g pixelHeight /tmp/q1.png | tail -2",
"description": "激活 Qoder 并截图"
}结果
pixelWidth: 3840 pixelHeight: 2160
读文件/tmp/q1.png
参数
{
"file_path": "/tmp/q1.png"
}结果
（含 1 张图片，回放不展示）
思考
The panel is open with 每天领 100 Credits, 领取 button at displayed (1208, 519) → original pixels (2320, 996) → logical points = /2 → (1160, 498). Given note says (1155,499). Good.
But System Settings window overlaps? System Settings is open behind, and a notification. Qoder is frontmost. Let's click with cliclick at logical (1160, 498).
Note Retina 2x: screenshot 3840x2160 for logical 1920x1080? Wait, screen is 3840x2160 physical, and displayed image at 2000x1125. If logical resolution is 1920x1080, then scale = 2. Logical coordinate = pixel/2. Button at pixel (2320,996) → (1160, 498). Matches given hint.
Let me click.
终端/opt/homebrew/bin/cliclick c:1160,498 2>&1; sleep 3; screencapture -x /tmp/q2.png; echo done
参数
{
"command": "/opt/homebrew/bin/cliclick c:1160,498 2>&1; sleep 3; screencapture -x /tmp/q2.png; echo done",
"description": "点击领取按钮并截图"
}结果
done
子任务 · task_started点击领取按钮并截图
子任务 · task_notification点击领取按钮并截图
读文件/tmp/q2.png
参数
{
"file_path": "/tmp/q2.png"
}结果
（含 1 张图片，回放不展示）
思考
Claimed: button now "已领取", subtitle "领取成功，Credits 已到账".
Now save this screenshot. Then model selector: bottom of chat box shows "Qwen3.8-Flash" with dropdown at logical (1373,858) displayed → displayed coords (1373,858)? The displayed image is 2000x1125, and logical screen is 1920x1080. So multiply displayed by 0.96 to get logical. The model chip at displayed ~(1360,858) → logical (1306, 824). Let me compute: displayed x 1360 * 0.96 = 1305.6; y 858*0.96 = 823.7.
Let me use cliclick at (1306, 824). But first save screenshots properly.
Actually, also need to verify usage page +100 via web. Let me do model selector first.
Save q2 as claim screenshot.
终端cp /tmp/q2.png ~/grok-cc-task/runs/qoder-desktop-20261024/qoder_daily_claim.png; cp /tmp/q2.png ~/.wool/qoder_desktop_c…
参数
{
"command": "cp /tmp/q2.png ~/grok-cc-task/runs/qoder-desktop-20261024/qoder_daily_claim.png; cp /tmp/q2.png ~/.wool/qoder_desktop_claim_daily100.png; cp /tmp/q1.png ~/grok-cc-task/runs/qoder-desktop-20261024/qoder_panel_before.png; /opt/homebrew/bin/cliclick c:1306,824 2>&1; sleep 2; screencapture -x /tmp/q3.png; echo ok",
"description": "保存截图并打开模型选择器"
}结果
ok
读文件/tmp/q3.png
参数
{
"file_path": "/tmp/q3.png"
}结果
（含 1 张图片，回放不展示）
思考
The panel closed (clicked X? no — clicking elsewhere closed the activity panel), and model chip still Qwen3.8-Flash. My click at (1306,824) maybe hit nothing / the panel closed because click outside. Actually the activity popup closed — maybe my click landed outside popup? Popup spanned displayed x 735-1265, y 310-775. Logical x 1306 is outside popup (popup logical right edge ~1214). So the click closed the popup. Oops, the model chip is at logical x≈1306, y≈824.
Now click the model chip (chevron at displayed 1437,858 → logical 1380, 824; text area displayed 1300-1420 → logical 1248-1363). Let me click at logical (1350, 824) - on the chevron.
终端/opt/homebrew/bin/cliclick c:1349,824 2>&1; sleep 2; screencapture -x /tmp/q4.png; echo ok
参数
{
"command": "/opt/homebrew/bin/cliclick c:1349,824 2>&1; sleep 2; screencapture -x /tmp/q4.png; echo ok",
"description": "点击模型选择器"
}结果
ok
读文件/tmp/q4.png
参数
{
"file_path": "/tmp/q4.png"
}结果
（含 1 张图片，回放不展示）
思考
No dropdown opened. Maybe the click didn't register on the chip (or chip needs click on text). Note the screen coordinate: logical screen size? Let me check `system_profiler` or `sips` for display scaling. Screenshot 3840x2160 at 2x means logical 1920x1080. cliclick uses logical global coordinates. Qoder window at [300,124] size [1320,800] logical — window covers x 300-1620, y 124-924.
Model chip at displayed x ~1305-1435 (in 2000-wide render) → fraction 0.6525-0.7175 → logical x 1253-1378. y 858/1125=0.7627 → logical 823.7. So click at 1349,824 should hit chevron.
But nothing happened. Maybe the click appeared but the dropdown is rendered... no. Perhaps the click did open and closed instantly? Or the pill requires clicking directly on text.
Alternatively the Qoder window isn't actually receiving clicks due to System Settings window? No, Qoder is frontmost.
Hmm — wait, clicking at 1306,824 earlier closed the popup. That worked, so clicks register. Let me try clicking on the text center: logical (1300, 824). Or the chip might be at y slightly different. Let me zoom into the region to get precise pixel coordinates.
Crop region x 2450-2800 px, y 1600-1700.
终端cd /tmp && sips -c 160 500 --cropOffset 1600 2400 q4.png --out /tmp/crop1.png >/dev/null 2>&1; sips -g pixelWidth -g pi…
参数
{
"command": "cd /tmp && sips -c 160 500 --cropOffset 1600 2400 q4.png --out /tmp/crop1.png >/dev/null 2>&1; sips -g pixelWidth -g pixelHeight /tmp/crop1.png | tail -2",
"description": "裁剪模型选择器区域"
}结果
pixelWidth: 500 pixelHeight: 160 Shell cwd was reset to /Users/mengmeng/grok-cc-task
读文件/tmp/crop1.png
参数
{
"file_path": "/tmp/crop1.png"
}结果
（含 1 张图片，回放不展示）
思考
Crop offset x=2400,y=1600 (in original pixels). In the crop (500x160), the chip spans x≈100-385 → original 2500-2785. Chevron at crop x≈365 → original 2765. y ≈ crop 115 → original 1715. Logical: x 2765/2=1382.5, y 1715/2=857.5.
My earlier y=824 was wrong! Displayed image 2000 wide maps to 3840 → factor 1.92, and logical = /2 = 0.96. Displayed y 858 → 823.7 logical. But actual is 857.5. Hmm, that suggests the screenshot y coordinate mapping differs... Wait displayed image 2000x1125 vs original 3840x2160: scale 1.92. In displayed image the chip was at y≈858 → original 1647 → logical 823. But crop says original y≈1715 → displayed 893. Hmm, my visual estimate in the displayed image may be off.
Let's just trust pixel crop: click logical (1382, 857).
Note: window is at y 124..924, so 857 is inside. OK.
Also note the earlier successful click at (1160,498) for 领取: that was in the popup. Fine.
Click.
终端/opt/homebrew/bin/cliclick c:1382,857 2>&1; sleep 2; screencapture -x /tmp/q5.png; sips -c 1200 1400 --cropOffset 800 1…
参数
{
"command": "/opt/homebrew/bin/cliclick c:1382,857 2>&1; sleep 2; screencapture -x /tmp/q5.png; sips -c 1200 1400 --cropOffset 800 1600 /tmp/q5.png --out /tmp/crop2.png >/dev/null 2>&1; echo ok",
"description": "点击模型下拉并截图"
}结果
ok
子任务 · task_started点击模型下拉并截图
子任务 · task_notification点击模型下拉并截图
读文件/tmp/crop2.png
参数
{
"file_path": "/tmp/crop2.png"
}结果
（含 1 张图片，回放不展示）
思考
The dropdown opened: Auto, 极致, 快速, 经济, Sonus, Cantus, Qwen3.8-Max, Qwen3.8-Flash… and 模型管理. The list is scrollable. DeepSeek-V4.1-Flash-1017 may be below — need scroll. Click "模型管理" maybe shows all models. Better: scroll within the list.
The list region: crop offset (1600,800) in original pixels; crop is 1400x1200 but displayed at native? The crop shown 1400x1200. So coordinates in crop + (1600,800) = original pixels; /2 = logical.
List area center: crop (860, 500) → original (2460, 1300) → logical (1230, 650).
Let me scroll down inside the list using cliclick with scroll wheel: cliclick has "w:" for wheel? cliclick supports `w:10` (scroll up) and `w:-10`? Actually cliclick has `w:<number>` scroll wheel up (positive) / down (negative)? cliclick docs: `w:100` scrolls wheel 100 units up; negative scrolls down? Let me use cliclick m:1230,650 then w:-5.
Alternatively click 模型管理 to see a full model list panel. That likely lists all models including DeepSeek. Let me first scroll.
cliclick's scroll: "w:10" = scroll up 10, "w:-10" = scroll down. Let's try.
终端/opt/homebrew/bin/cliclick m:1230,650 w:-6 2>&1; sleep 1; screencapture -x /tmp/q6.png; sips -c 1200 1400 --cropOffset …
参数
{
"command": "/opt/homebrew/bin/cliclick m:1230,650 w:-6 2>&1; sleep 1; screencapture -x /tmp/q6.png; sips -c 1200 1400 --cropOffset 800 1600 /tmp/q6.png --out /tmp/crop3.png >/dev/null 2>&1; echo ok",
"description": "在模型列表中向下滚动"
}结果
ok
读文件/tmp/crop3.png
参数
{
"file_path": "/tmp/crop3.png"
}结果
（含 1 张图片，回放不展示）
思考
The scroll didn't scroll the list (it selected hover 经济 and opened a tooltip). The list is cut at bottom — it's a fixed height list with a fade at bottom. There's "模型管理" (Model management) at the bottom. Let's click 模型管理 to open full model manager.
模型管理 at crop (660, 793) → original (2260, 1593) → logical (1130, 796).
But wait, clicking may select a model. Click 模型管理 is safe.
Alternatively the dropdown might scroll via keyboard arrows. Let's use 模型管理.
终端/opt/homebrew/bin/cliclick c:1130,796 2>&1; sleep 2; screencapture -x /tmp/q7.png; echo ok
参数
{
"command": "/opt/homebrew/bin/cliclick c:1130,796 2>&1; sleep 2; screencapture -x /tmp/q7.png; echo ok",
"description": "点击模型管理"
}结果
ok
读文件/tmp/q7.png
参数
{
"file_path": "/tmp/q7.png"
}结果
（含 1 张图片，回放不展示）
思考
Menu bar now shows 访达 (Finder)! The click at 1130,796 landed on... hmm, no, menubar shows 访达 meaning Finder became active — my click on 模型管理 maybe opened a separate window that didn't come forward, or the click went to Finder. Yikes. Qoder window still visible.
Wait, earlier menu bar showed "Qoder". Now "访达". So Finder is frontmost. My click at (1130,796) — Qoder window spans 300-1620 x, 124-924 y. 1130,796 inside. Hmm, but the dropdown maybe closed and the click passed to Finder behind? No.
Possibly 模型管理 opened a new window/tab that is not visible, and activation switched to Finder? Odd.
Let me just re-activate Qoder and reopen dropdown, then use keyboard to scroll list (arrow keys / Home/End) — dropdown likely keyboard-navigable. Or simply check whether DeepSeek model appears in 模型管理.
Better approach: use Qoder's own usage/web page for model list? The requirement: "打开模型选择器，确认有 DeepSeek-V4.1-Flash-1017（或 DeepSeek-V4.1-Flash），截图". So dropdown suffices if the model is listed.
The dropdown list appears to have only ~8 items with fade; maybe scrolling works with the mouse wheel when hovering over the list itself (not the tooltip). My wheel attempt showed a tooltip; the list didn't scroll. Perhaps the list is not scrollable and 模型管理 has the full list.
Let me re-activate Qoder, click the model chip, then press keyboard "End"/down arrows.
Actually, keyboard: after clicking the chip the dropdown opens; pressing Down arrow may move selection. We could type "deepseek"? Probably not searchable.
Let's do: activate Qoder, click chip, then screenshot to confirm open, then use `cliclick kp:down` x8 and see if the list scrolls.
But first, the Finder activation issue — maybe 模型管理 opens the "Model Management" page in a new app window which is hidden behind. Let me check windows again via osascript.
终端osascript -l JavaScript /tmp/qoder_win.js 2>&1 | head; echo ---; osascript -e 'tell application "System Events" to get …
参数
{
"command": "osascript -l JavaScript /tmp/qoder_win.js 2>&1 | head; echo ---; osascript -e 'tell application \"System Events\" to get name of first application process whose frontmost is true'",
"description": "检查 Qoder 窗口与前台应用"
}结果
0 Qoder [300,124] [1320,800] --- Finder
思考
Only one Qoder window still. Finder is frontmost — strange but the Qoder window is likely still visible (screenshot shows it). Let me activate Qoder then click the chip again and use keyboard navigation.
Plan: activate Qoder, click chip (1382,857), screenshot, then press Down repeatedly + screenshot.
Actually better: press key "End" won't scroll a div. Use `cliclick kd:...`? Hmm.
Alternative: scroll using AppleScript System Events key code? Wheel scroll events with cliclick `w:-6` should scroll the div under cursor if it's scrollable. It didn't scroll but showed a tooltip over 经济 — meaning cursor was over 经济 row, so wheel came to the list but list may not be scrollable (fixed 7 items + fade). The fade suggests more content below with scroll.
Wait, the fade + partial "Qwen3.8-Flash" row cut off at bottom indicates the container has a max-height with scroll. Maybe the wheel event was consumed differently. Let me try `cliclick w:-20` with cursor at list, or use AppleScript "scroll" via System Events? Not available.
Try cliclick with multiple wheel steps: `w:-5 w:-5 w:-5`. Or maybe cliclick's w uses lines; -6 might be too little? It should move 6 lines.
Alternative: open 模型管理 properly — maybe it opened a Qoder settings page but the click at that y in Qoder... Actually the click did dismiss dropdown and activated Finder, which means the click didn't hit Qoder at all — possibly because the dropdown's 模型管理 row was at a different location than I computed. The dropdown overlay may have closed on mouse move and the click hit the desktop/Finder.
Hmm. Coordinates: crop offset (1600,800), crop size 1400x1200. In crop, 模型管理 at y≈793 → original y = 800+793 = 1593 → logical 796.5. x≈660 → original 2260 → logical 1130. That seems right... but the dropup may have been positioned relative and might have closed because wheel event.
Let me retry step by step: activate Qoder (which may need click on window), click chip, verify dropdown open via screenshot, then click 模型管理 and immediately screenshot.
终端osascript -e 'tell application "System Events" to tell process "Qoder" to set frontmost to true' 2>&1; sleep 1; /opt/ho…
参数
{
"command": "osascript -e 'tell application \"System Events\" to tell process \"Qoder\" to set frontmost to true' 2>&1; sleep 1; /opt/homebrew/bin/cliclick c:1382,857 2>&1; sleep 2; screencapture -x /tmp/q8.png; sips -c 1200 1400 --cropOffset 800 1600 /tmp/q8.png --out /tmp/crop4.png >/dev/null 2>&1; echo ok",
"description": "重新激活 Qoder 并打开模型下拉"
}结果
ok
子任务 · task_started重新激活 Qoder 并打开模型下拉
子任务 · task_notification重新激活 Qoder 并打开模型下拉
读文件/tmp/crop4.png
参数
{
"file_path": "/tmp/crop4.png"
}结果
（含 1 张图片，回放不展示）
思考
Dropdown open. Note the list ends at Qwen3.8-Flash cut (faded) then 模型管理. So the list scrolls within that area. The dropdown's visible list bottom edge at crop y≈755 → original 1555 → logical 777.
The faded row indicates a scrollable container. Wheel over list should scroll it. Earlier wheel produced hover tooltip, and possibly the list did scroll? It didn't visually change.
Maybe the list scrolls with drag/scrollbar. There's no visible scrollbar.
Try clicking 模型管理 now while dropdown open: crop (660,793) → logical (1130,796). But careful: the menu may have moved. It's here.
Actually — maybe 模型管理 opens a modal within Qoder. Last time it apparently dismissed and focused Finder. Suspicious. Let's instead try hovering list and scrolling with more lines: `m:1230,650 w:-10`. Screenshot right after (before tooltip appears? tooltip took ~1s).
Let's try.
终端/opt/homebrew/bin/cliclick m:1230,620 w:-10 2>&1; sleep 0.4; screencapture -x /tmp/q9.png; sips -c 1200 1400 --cropOffs…
参数
{
"command": "/opt/homebrew/bin/cliclick m:1230,620 w:-10 2>&1; sleep 0.4; screencapture -x /tmp/q9.png; sips -c 1200 1400 --cropOffset 700 1600 /tmp/q9.png --out /tmp/crop5.png >/dev/null 2>&1; echo ok",
"description": "在模型列表滚动并立即截图"
}结果
ok
读文件/tmp/crop5.png
参数
{
"file_path": "/tmp/crop5.png"
}结果
（含 1 张图片，回放不展示）
思考
The list still shows the same items (didn't scroll). It seems the dropdown only contains these presets (Auto/极致/快速/经济/Sonus/Cantus/Qwen3.8-Max/Qwen3.8-Flash…) — fade hint of more. The Qwen3.8-Flash row is cut; below it there may be more.
Maybe the list needs scrolling with trackpad but cliclick wheel doesn't reach. Let's click 模型管理 to open Model Management (full model list). Now dropdown is open. 模型管理 at crop (660,894) with offset y=700 → original y=1594 → logical 797; x crop 660 → original 2260 → logical 1130. Same as before. Click it.
Hmm, previous time it activated Finder - possibly a Qoder bug opening an external link? Let's click and immediately screenshot.
终端/opt/homebrew/bin/cliclick c:1130,797 2>&1; sleep 2.5; screencapture -x /tmp/q10.png; echo ok; osascript -e 'tell appli…
参数
{
"command": "/opt/homebrew/bin/cliclick c:1130,797 2>&1; sleep 2.5; screencapture -x /tmp/q10.png; echo ok; osascript -e 'tell application \"System Events\" to get name of first application process whose frontmost is true'",
"description": "点击模型管理并检查前台应用"
}结果
ok Qoder
子任务 · task_started点击模型管理并检查前台应用
子任务 · task_notification点击模型管理并检查前台应用
读文件/tmp/q10.png
参数
{
"file_path": "/tmp/q10.png"
}结果
（含 1 张图片，回放不展示）
思考
Interesting: the dropdown closed and reopened, but now positioned further right/down (it was re-opened by my click landing on the chip? no...). Actually the screenshot shows the dropdown at a different location (x 1110-1430 displayed) and appears still open. My click at (1130,797) hit the chip region again? The chip is at y 857 logical; 797 is above. Hmm.
Wait the dropdown now at displayed y 492-860. This looks like the click closed and something reopened. Possibly my click at 1130,797 hit inside the "会话 Credits" area and the dropdown was reopened by hover? No.
Anyway, dropdown is open again but shifted. New position in displayed image: 模型管理 at displayed (1150, 848) → logical (1104, 814). Hmm.
Actually the dropup moved because the previous one closed and reopened anchored elsewhere? The list now: same items.
Key problem: the list contains 8 entries; are there more below (DeepSeek)? The scroll doesn't work. Maybe the visible list region has a fade because the last item is partially hidden, and there IS scrolling but cliclick wheel isn't delivered as a proper scroll event to Electron.
Alternative: use keyboard. Click on a row first (e.g., hover), then press Down/Up arrows to navigate and Enter. But that would change the model — unsafe? Changing model is fine (not a purchase), but the task only requires confirming availability. Still, we shouldn't change the selected model unnecessarily.
Better: use LCU (mcp__lcu__js) to access Qoder? LCU controls apps via accessibility/screenshots; Electron apps may expose AX tree. Let's try LCU getState to see if Qoder is accessible. That could reveal the model list text.
Actually simplest: Qoder's model list may be documented on their site; but the task wants visual confirmation + screenshot.
Alternative: In the Qoder IDE (Code tab), the model selector may have a full list with search. There's also "Cowork" tab.
Another idea: scroll with trackpad gesture via AppleScript isn't possible. But cliclick supports "w" — which sends CGEvent scroll wheel. Electron should handle. Unless the wheel is being sent while cursor over the tooltip.
Hmm, in q9 the cursor was over 快速 row and a tooltip appeared, and the list did NOT scroll. Maybe the list simply has no more items than those shown, and the fade is just a mask effect for the "模型管理" footer. Look: Qwen3.8-Flash row is cut mid-row and faded — that looks like a masked scroll container with more content, indeed maybe there are additional rows (DeepSeek) hidden.
Wait: in the current screenshot, the list shows the same items and the Qwen3.8-Flash row cut. If the container scrolled to top and there were more items, the cut suggests max height reached. The scroll would reveal them.
Let me try LCU to interact — mcp__lcu__js. First call returns docs. Alternatively use `osascript` to send scroll via "System Events" — there's no scroll command.
Try cliclick again but with the cursor over a non-row gap (left padding x≈1100) and more wheel: w:-30. Let me also try key press PageDown after clicking in list.
Let me try keyboard approach: click on "Auto" row? That selects Auto — changes model. Not harmful but let's avoid.
Alternative approach for wheel: use Python Quartz CGEventCreateScrollWheelEvent with pixel units — more reliable for Electron. Let me write a small Python script with Quartz (pyobjc likely installed?).
Let me check python3 -c "import Quartz".
终端python3 -c "import Quartz; print('ok')" 2>&1 | tail -1
参数
{
"command": "python3 -c \"import Quartz; print('ok')\" 2>&1 | tail -1",
"description": "检查 pyobjc Quartz 可用性"
}结果
ModuleNotFoundError: No module named 'Quartz'
思考
No Quartz. Try /usr/bin/python3? Same. Check if there's a python with pyobjc: maybe system python3 at /usr/bin/python3 with pyobjc? Let's test /usr/bin/python3 -c import Quartz.
Alternatively use `swift`? Too heavy.
Another approach: use LCU. Let's fetch mcp__lcu__js schema and try getState — maybe it can see Qoder window and click coordinates with proper scroll. LCU likely supports scroll.
Let's load the tool.
找工具select:mcp__lcu__js
参数
{
"query": "select:mcp__lcu__js",
"max_results": 1
}结果
[tool_reference] {"type": "tool_reference", "tool_name": "mcp__lcu__js"}终端/usr/bin/python3 -c "import Quartz; print('sys ok')" 2>&1 | tail -1
参数
{
"command": "/usr/bin/python3 -c \"import Quartz; print('sys ok')\" 2>&1 | tail -1",
"description": "检查系统 Python 的 Quartz"
}结果
ModuleNotFoundError: No module named 'Quartz'
思考
Per LCU instructions, first invocation must be exactly one API call. Let's do `await cua.getState();` — but that's expensive/time. Alternatively getApp('Qoder'). Rules: "On the first invocation ... execute exactly one of the API calls shown below". getApp("Qoder") is one of them and returns UI state. Let's do that.
Bound: timeout_ms 45000.
浏览器出错Computer Use was not approved to use Qoder
参数
{
"code": "let app = await cua.getApp(\"Qoder\");",
"title": "查看 Qoder 窗口 UI 状态",
"timeout_ms": 45000
}结果
Computer Use was not approved to use Qoder
## Computer Use
Control native apps and browsers on the user’s computer by reading or operating UI. Prefer purpose-built connectors, APIs, or CLIs when available.
- Use `cua_repl` (JavaScript) for all UI actions.
- Do not use other technologies besides `cua_repl` for computer interactions, unless specifically requested by the user (e.g. AppleScript, `osascript`, JXA, System Events, CGEvent synthesis).
- Prefer a dedicated plugin or skill when it can complete the task; use Computer Use for interactions that are not exposed through a more specific interface.
- `cua_repl` state is persistent across calls
- If you create a tab or get an app, the initial UI state is automatically included in the tool result.
## API
```typescript
type Vec2 = [x: number, y: number];
type ObservationOptions = { emit?: boolean };
type StateOptions = ObservationOptions & { disableDiffing?: boolean };
type ScreenshotRegion = {
id: string;
zIndex: number;
bytes: Uint8Array;
originX?: number;
originY?: number;
width?: number;
height?: number;
};
type StateAndScreenshot = {
state: string;
screenshot?: Uint8Array;
screenshots?: ScreenshotRegion[];
};
type ScreenshotInputOptions = { screenshotId?: string }; // Windows only
type AppClickOptions = ClickOptions & ScreenshotInputOptions;
type AppScrollOptions = { pixels: number } & ScreenshotInputOptions;
type PasteOptions = { format?: "text" | "md" | "html" };
type ClickOptions = {
mouseButton?: MouseButton;
clickCount?: number;
key?: string;
durationMs?: number;
};
type PressKeyOptions = { durationMs?: number };
type SelectTextOptions = {
prefix?: string;
suffix?: string;
selectionType?: SelectionType;
};
type Direction = "up" | "down" | "left" | "right" | "u" | "d" | "l" | "r";
type SelectionType = "text" | "cursor_before" | "cursor_after";
type MouseButton = "left" | "right" | "middle" | "l" | "r" | "m";
interface Target<ScreenshotResult = Uint8Array | ScreenshotRegion[]> {
getAXState(options?: StateOptions): Promise<string>;
getScreenshot(options?: ObservationOptions): Promise<ScreenshotResult>;
getAXStateAndScreenshot(options?: StateOptions): Promise<StateAndScreenshot>;
click(target: number | Vec2, options?: ClickOptions): Promise<void>;
drag(from: Vec2, to: Vec2): Promise<void>;
scroll(target: number | Vec2, direction: Direction, pages?: number): Promise<void>;
selectText(elementIndex: number, text: string, options?: SelectTextOptions): Promise<void>;
setValue(elementIndex: number, value: string): Promise<void>;
performSecondaryAction(elementIndex: number, action: string): Promise<void>;
}
type AppInfo = {
id: string;
displayName?: string;
lastUsedDate?: string;
useCount?: number;
isRunning?: boolean;
windows?: WindowInfo[];
};
type WindowInfo = { id: number; app: string; title?: string };
interface App extends Target {
click(target: number | Vec2, options?: AppClickOptions): Promise<void>;
drag(from: Vec2, to: Vec2, options?: ScreenshotInputOptions): Promise<void>;
scroll(
target: number | Vec2,
direction: Direction,
distance?: number | AppScrollOptions,
): Promise<void>;
paste(text: string, options?: PasteOptions): Promise<void>;
pressKey(key: string, options?: PressKeyOptions): Promise<void>;
// Type at current focus, or pass a field index from getAXState() to target it (Linux).
typeText(text: string, elementIndex?: number): Promise<void>;
// Send printable keys to current focus without pasting or finding a text field (Linux only).
typeCharacters?(text: string): Promise<{ charactersSent: number }>;
}
type BrowserInfo = {
id: string;
name?: string;
family?: string;
type?: "iab" | "extension" | "cdp" | "mcpapps";
profileName?: string;
metadata?: { extensionInstanceId?: string; codexSessionId?: string };
};
type BrowserTabInfo = {
id: string;
providerTabId?: string;
title?: string;
url?: string;
};
interface Browser {
readonly browserId: string;
documentation(): Promise<string>;
}
interface BrowserProvider {
… 已截断（仅显示前 4 KB）system · ui_panes 原始记录
{"type": "system", "subtype": "ui_panes", "panes": [{"id": "lcu-approval-probe", "title": "lcu-approval-probe", "plugin": "lcu-approve"}], "shown_id": "lcu-approval-probe", "focused_id": null, "focus_requested_id": null, "uuid": "f4583dd9-8dfb-4846-9dad-ed80aa0108ad", "session_id": "d720c9c4-d57d-4c3d-ba00-9768786690a6"}system · ui_panes 原始记录
{"type": "system", "subtype": "ui_panes", "panes": [], "shown_id": null, "focused_id": null, "focus_requested_id": null, "uuid": "de4e94d0-8471-410f-b823-a5f1bba81300", "session_id": "d720c9c4-d57d-4c3d-ba00-9768786690a6"}思考
LCU not approved for Qoder. Fall back to mouse/keyboard via cliclick.
Alternative to reveal full model list: In Qoder IDE (Code mode), there's model selector too. Or the 模型管理 opens a settings page. My earlier click resulted in Finder activation — perhaps 模型管理 is a link that opened something external.
Let me think about the dropdown's list structure. There might be a scrollable inner list. cliclick wheel might use line-based scrolling that Electron handles... It should. But maybe the wheel event went to the wrong window because Qoder wasn't frontmost at that moment? In q9 screenshot Qoder UI responded (tooltip), so it was frontmost.
Perhaps the list actually contains exactly those 8 entries visible, and the "Qwen3.8-Flash" row cut + fade is just the rounded container masking the last row before the sticky "模型管理" footer, which implies scrolling is possible.
Let me try dragging the scrollbar? None visible.
Alternative: use keyboard Tab navigation and arrow keys. When dropdown open, press Down arrow repeatedly — if the container scrolls to keep the highlight visible, we'd see more items. Let's try: open dropdown, press Down 8 times, screenshot.
That changes highlight only (not selection until Enter). Fine.
Let me do that.
终端/opt/homebrew/bin/cliclick c:1382,857 2>&1; sleep 1.5; for i in 1 2 3 4 5 6 7 8 9 10; do /opt/homebrew/bin/cliclick kp:…出错Exit code 144
参数
{
"command": "/opt/homebrew/bin/cliclick c:1382,857 2>&1; sleep 1.5; for i in 1 2 3 4 5 6 7 8 9 10; do /opt/homebrew/bin/cliclick kp:arrow-down >/dev/null 2>&1; sleep 0.15; done; sleep 1; screencapture -x /tmp/q11.png; sips -c 1200 1400 --cropOffset 700 1600 /tmp/q11.png --out /tmp/crop6.png >/dev/null 2>&1; echo ok",
"description": "用方向键在模型列表中下移"
}结果
Exit code 144
子任务 · task_started用方向键在模型列表中下移
子任务 · task_notification用方向键在模型列表中下移