Phase 7：修好「进行中不显示 / 不实时 / 刷新也不出新会话」。目录：~/grok-cc-ta…
⋯
Phase 7：修好「进行中不显示 / 不实时 / 刷新也不出新会话」。目录：~/grok-cc-task/cc-live-monitor/
## 用户现象
1. 正在跑的会话侧栏/详情没有「进行中」实时感（没有流式更新）。
2. 去做别的工作后，网页怎么刷新也看不到新会话。
## 根因（已核实，按这个改）
A. `run.live` 现在几乎只靠 `~/grok-cc-task/.browser.lock`（pid 活着 + 目录名后缀匹配）。锁被清掉、或非 run.sh 启动时，即使 `stream.*.jsonl` 还在涨，也不标运行中，SSE 也不会挂上。
B. 首页侧栏是服务端渲染的静态 HTML，没有轮询；只有用户整页刷新才重扫。且监控**只看** `~/grok-cc-task/runs/`（run.sh 产出）。Claude 桌面 App / Codex App 直开的对话本来就不会出现——这次先把 run.sh 路径做对，并在页脚加一行说明。
## 要做的改动（最小改动，别推倒）
1. **扩大 live 判定**（`runs_data.py` `build_run`）：
- 保留现有 lock 判定。
- 新增兜底：若 `runner.log` 尚无 `done rc=` / `exit rc=`（或 state 仍是 unfinished/unknown/queued），且任一 `stream*.jsonl`（或 codex jsonl）的 mtime 在最近 **90 秒**内有更新 → `live=True`，`status=运行中`，`state=running`。
- 锁判定优先；不要把两小时已中断的又标成运行中。
2. **侧栏自动刷新**（首页 + 详情页左侧）：
- 新增轻量接口，例如 `GET /api/sidebar`（或 `/partial/sidebar`）返回侧栏 HTML 片段或 JSON（id/title/status/severity/live/mtime），每 **4–5 秒**用 fetch 拉一次；有变化才替换 `.side-list`（保留当前选中高亮与滚动位置）。
- 详情页打开时若该 run 变为 live，提示「已开始实时」或自动连 SSE（若尚未连接）。
3. **SSE**：确认 `run.live` 为真时详情页挂 EventSource；流式草稿气泡 + 光标逻辑保持。若 nginx 路径访问，响应头继续禁止 buffering（`X-Accel-Buffering: no`, `Cache-Control: no-cache`）。
4. 页脚/侧栏底部加一行小字：`只显示 run.sh 写入 ~/grok-cc-task/runs 的会话；Claude/Codex 桌面 App 直开会看不到。`
5. 改完**重启** 8787 上的 monitor（先杀旧 Python 监听 8787，再按 README/现有方式启动，HOST 保持 0.0.0.0:8787）。
6. 自测：
- 用 python 写一个临时假 run 目录：不断往 stream.1.jsonl append 几行假 stream-json，确认侧栏出现「运行中」且详情 SSE 有增量（测完删掉假目录）。
- 或跑现有 selftest 里能覆盖 live 的部分并补一条。
7. 更新 PROGRESS.md「Phase 7 — 完成」：写清改了啥、怎么验收。
做完停住等我。不要改 run.sh，不要加无关功能。
你
C
我先看一下项目现状。
终端cd ~/grok-cc-task/cc-live-monitor && ls -la && echo "---README---" && cat README.md 2>/dev/null | head -50
参数
{
"command": "cd ~/grok-cc-task/cc-live-monitor && ls -la && echo \"---README---\" && cat README.md 2>/dev/null | head -50",
"description": "列出监控目录并看 README"
}结果
total 560 drwxr-xr-x@ 10 mengmeng staff 320 10月 25 17:07 __pycache__ drwxr-xr-x 16 mengmeng staff 512 10月 25 17:07 . drwxr-xr-x 73 mengmeng staff 2336 10月 25 20:09 .. -rw------- 1 mengmeng staff 25 10月 25 16:43 .phone-token -rw-r--r--@ 1 mengmeng staff 24174 10月 25 17:05 assets.py -rw-r--r--@ 1 mengmeng staff 19132 10月 25 15:48 codex_parse.py -rw-r--r--@ 1 mengmeng staff 4393 10月 25 16:09 md_lite.py -rw-r--r--@ 1 mengmeng staff 32197 10月 25 17:07 PROGRESS.md -rw-r--r--@ 1 mengmeng staff 9949 10月 25 17:07 README.md -rw-r--r--@ 1 mengmeng staff 4343 10月 25 17:07 RESULT.md -rw-r--r--@ 1 mengmeng staff 17118 10月 25 17:04 runs_data.py -rw-r--r--@ 1 mengmeng staff 20486 10月 25 17:05 selftest.py -rw-r--r--@ 1 mengmeng staff 64443 10月 25 20:08 server.log -rw-r--r--@ 1 mengmeng staff 14895 10月 25 16:41 server.py -rw-r--r--@ 1 mengmeng staff 24472 10月 25 15:50 stream_parse.py -rw-r--r--@ 1 mengmeng staff 23869 10月 25 17:04 views.py ---README--- # cc-live-monitor `~/grok-cc-task/runs` 的只读 Web 监控面板。 - **Phase 1**：run 列表、`task.txt` / `runner.log` 原文、目录内任意文件查看。 - **Phase 2**：把 `stream.*.jsonl` 解析成时间线，详情页提供聊天式回放（气泡 + 可折叠思考/工具卡），顶栏显示 model、session_id、cwd、effort。 - **Phase 3**：运行中的 run 走 SSE 实时跟随——服务端 tail 文件增长，页面增量追加，不整页刷新（滚动位置与展开状态都保留），「锁定滚动跟随」默认开，断线自动重连并补发断线期间的事件。 - **Phase 4**：上滚自动暂停跟随、可「跳到最新」；被杀运行的最后一段流式输出落成「不完整」气泡；识别 Codex 产物（`agent-*.jsonl` / `events.jsonl` / rollout），用同一套时间线回放。 - **Phase 5**：界面重做成 Claude 桌面 App 那种对话形态——左侧会话列表（按时间、标题取 `task.txt` 首行、运行中高亮），右侧一条条「你 / Claude」气泡；`task.txt` 作为第一条用户消息，Claude 回复按 Markdown 渲染，工具调用默认收成一行，思考默认折成一行小字；状态压缩成顶栏一行。 - **Phase 6**：可读性——侧栏与顶栏状态改说人话（出口未过 / 未完成 / 已中断 / 排队中 / 无记录），只有真失败才给红点；工具名映射成中文（调用了 终端 · 浏览器 · 读文件），出错时摘要一行短句，展开区超 4KB 自动截断；既没有 `runner.log` 也没有 jsonl 的空工件目录不再出现在列表里。 **只读**：不写、不改、不删 runs 目录里的任何文件。 ## 启动 ```bash cd ~/grok-cc-task/cc-live-monitor && python3 server.py ``` 然后打开 <http://127.0.0.1:8787> 后台常驻： ```bash cd ~/grok-cc-task/cc-live-monitor && nohup python3 server.py > server.log 2>&1 & ``` 停止： ```bash lsof -ti tcp:8787 -sTCP:LISTEN | xargs kill ``` > 必须带 `-sTCP:LISTEN`。`lsof -ti tcp:8787` 会把**浏览器那边的客户端连接**也列出来， > 直接 `xargs kill` 会连带杀掉 Chrome。 ## 参数 ```bash python3 server.py --port 9000 # 换端口 python3 server.py --runs-dir ~/grok-cc-task/runs # 换数据目录 python3 server.py --host 127.0.0.1 # 只给本机用（默认是 0.0.0.0，手机可访问） ``` ## 路由 | 路径 | 说明 | |------|------| | `/` | 会话界面：左侧列表按时间倒序（默认取 60 条，`?limit=200` 可调，上限 2000），右侧默认打开最新一条 | | `/?q=chrome` | 侧栏搜索：run 名 + `task.txt` 前 4 KB，多词 AND，大小写不敏感 |
终端cd ~/grok-cc-task/cc-live-monitor && wc -l *.py 2>/dev/null; echo "---"; ls -R | head -60
参数
{
"command": "cd ~/grok-cc-task/cc-live-monitor && wc -l *.py 2>/dev/null; echo \"---\"; ls -R | head -60",
"description": "看 Python 文件规模"
}结果
545 assets.py
488 codex_parse.py
138 md_lite.py
508 runs_data.py
347 selftest.py
389 server.py
692 stream_parse.py
654 views.py
3761 total
---
__pycache__
assets.py
codex_parse.py
md_lite.py
PROGRESS.md
README.md
RESULT.md
runs_data.py
selftest.py
server.log
server.py
stream_parse.py
views.py
./__pycache__:
assets.cpython-314.pyc
codex_parse.cpython-314.pyc
md_lite.cpython-314.pyc
runs_data.cpython-314.pyc
selftest.cpython-314.pyc
server.cpython-314.pyc
stream_parse.cpython-314.pyc
views.cpython-314.pyc思考
Let me read the key files: runs_data.py (build_run), server.py (routes), views.py (sidebar rendering), and README rest.
读文件/Users/mengmeng/grok-cc-task/cc-live-monitor/runs_data.py
参数
{
"file_path": "/Users/mengmeng/grok-cc-task/cc-live-monitor/runs_data.py"
}结果
1 """扫描 ~/grok-cc-task/runs，把每个 run 目录整理成结构化信息。
2
3 只读：不写入、不修改 runs 目录下的任何文件，也不改 run.sh。
4 """
5
6 from __future__ import annotations
7
8 import os
9 import re
10 import threading
11 import time
12 from collections import OrderedDict
13 from dataclasses import dataclass, field
14
15 import codex_parse
16
17 DEFAULT_RUNS_DIR = os.path.expanduser("~/grok-cc-task/runs")
18 LOCK_DIR = os.path.expanduser("~/grok-cc-task/.browser.lock")
19
20 RESULT_NAMES = ("result.md", "result.txt", "result.json")
21 STREAM_SUFFIX = ".jsonl"
22 MAX_PREVIEW_BYTES = 400_000
23 MAX_TASK_HEAD = 4_000
24
25 STATUS_FILTERS = ("all", "running", "success", "failed")
26 CACHE_MAX = 4096
27
28 TIME_RE = re.compile(r"^\[(\d{2}):(\d{2}):(\d{2})\]")
29 DONE_RE = re.compile(r"done rc=(-?\d+)")
30 EXIT_RE = re.compile(r"exit rc=(-?\d+)")
31 RESULT_LINE_RE = re.compile(r"RESULT\s+(\S+)\s+ms\s+(\d+)\s+turns\s+(\d+)")
32 MODEL_RE = re.compile(r"attempt\s+1\s+model=(\S+)")
33 EFFORT_RE = re.compile(r"effort=(\S+)")
34 LIVE_WINDOW_S = 3600
35 INTERRUPTED_AFTER_S = 2 * 3600 # 「未结束」超过这么久没动静，当成中断了
36
37 # 状态文字都是给人看的；kind 才是给代码判断的
38 STATE_RUNNING = "running"
39 STATE_SUCCESS = "success"
40 STATE_FAILED = "failed" # 真的失败：非零退出
41 STATE_BLOCKED = "blocked" # 出口没过，任务没真正开始
42 STATE_INTERRUPTED = "interrupted"
43 STATE_QUEUED = "queued"
44 STATE_UNFINISHED = "unfinished"
45 STATE_UNKNOWN = "unknown"
46
47
48 @dataclass
49 class FileInfo:
50 name: str
51 size: int
52 mtime: float
53
54
55 @dataclass
56 class RunInfo:
57 name: str
58 path: str
59 mtime: float
60 files: list[FileInfo] = field(default_factory=list)
61 stream_files: list[str] = field(default_factory=list)
62 codex_files: list[str] = field(default_factory=list)
63 result_files: list[str] = field(default_factory=list)
64 has_task: bool = False
65 has_log: bool = False
66 status: str = "未知"
67 state: str = STATE_UNKNOWN
68 status_detail: str = ""
69 live: bool = False
70 flavor: str = "" # "" / claude / codex
71 model: str = ""
72 effort: str = ""
73 result_summary: str = ""
74 duration: str = ""
75
76 @property
77 def mtime_text(self) -> str:
78 return time.strftime("%m-%d %H:%M", time.localtime(self.mtime))
79
80 @property
81 def has_stream(self) -> bool:
82 return bool(self.stream_files)
83
84 @property
85 def has_result(self) -> bool:
86 return bool(self.result_files)
87
88 @property
89 def is_codex(self) -> bool:
90 return self.flavor == "codex"
91
92 @property
93 def category(self) -> str:
94 """列表筛选用的四分类：running / success / failed / other。"""
95 if self.live or self.state == STATE_RUNNING:
96 return "running"
97 if self.state == STATE_SUCCESS:
98 return "success"
99 if self.state == STATE_FAILED:
100 return "failed"
101 return "other"
102
103 @property
104 def severity(self) -> str:
105 """侧栏圆点/顶栏状态色：run / ok / bad / warn / dim。
106
107 只有「真的失败」才给红点；出口没过、已中断用暖黄提醒，不铺一片血红。
108 """
109 if self.live or self.state == STATE_RUNNING:
110 return "run"
111 if self.state == STATE_SUCCESS:
112 return "ok"
113 if self.state == STATE_FAILED:
114 return "bad"
115 if self.state in (STATE_BLOCKED, STATE_INTERRUPTED):
116 return "warn"
117 return "dim"
118
119 @property
120 def is_placeholder(self) -> bool:
121 """既没有 runner.log 也没有 stream/jsonl 记录：纯工件目录，列表里不显示。"""
122 if self.has_log:
123 return False
124 return not any(f.name.endswith(".jsonl") for f in self.files)
125
126 @property
127 def playable_files(self) -> list[str]:
128 """详情页能回放的文件：Claude stream 在前，Codex 记录在后。"""
129 return self.stream_files + self.codex_files
130
131
132 # ---------- 小缓存：列表要扫 500 个目录，日志/任务头不能每次都重读 ----------
133
134 _cache_lock = threading.Lock()
… 已截断（仅显示前 4 KB）读文件/Users/mengmeng/grok-cc-task/cc-live-monitor/server.py
参数
{
"file_path": "/Users/mengmeng/grok-cc-task/cc-live-monitor/server.py"
}结果
1 """CC Live Monitor — 最小 HTTP 服务（标准库 http.server）。
2
3 只绑 127.0.0.1:8787，只读访问 ~/grok-cc-task/runs。
4
5 启动：
6 python3 server.py # 127.0.0.1:8787
7 python3 server.py --port 9000 # 换端口
8 """
9
10 from __future__ import annotations
11
12 import argparse
13 import html
14 import json
15 import os
16 import sys
17 import time
18 import urllib.parse
19 from http import HTTPStatus
20 from http.server import BaseHTTPRequestHandler, ThreadingHTTPServer
21
22 sys.path.insert(0, os.path.dirname(os.path.abspath(__file__)))
23
24 import codex_parse
25 import runs_data as rd
26 import stream_parse as sp
27 import views
28
29 HOST = "0.0.0.0" # LAN: phone can use Mac IP:8787
30 PORT = 8787
31 RUNS_DIR = rd.DEFAULT_RUNS_DIR
32 DEFAULT_LIMIT = 60
33 MAX_LIMIT = 2000
34
35 SSE_TICK_S = 0.4 # 轮询文件增长的间隔
36 SSE_PING_S = 10.0 # 无数据时的心跳
37 SSE_IDLE_END_S = 3.0 # 多久没有新字节就去确认任务是否已结束
38
39
40 def _default_stream(run: rd.RunInfo) -> str:
41 """多个记录文件时默认展示内容最多的那个。
42
43 attempts 里常见 0 字节的空文件（重试一次但没产出），按尝试序号取会选中空文件，
44 所以按文件大小取最大者；Claude stream 与 Codex 记录混放时 Claude 优先。
45 """
46 if run.stream_files:
47 pool = run.stream_files
48 else:
49 pool = run.codex_files
50 if not pool:
51 return ""
52 sizes = {f.name: f.size for f in run.files}
53 return max(pool, key=lambda name: (sizes.get(name, 0), name))
54
55
56 class Handler(BaseHTTPRequestHandler):
57 server_version = "cc-live-monitor/0.1"
58 runs_dir = RUNS_DIR
59
60 # ---------- 基础工具 ----------
61
62 def _send(self, status: int, body: str, ctype: str = "text/html; charset=utf-8") -> None:
63 data = body.encode("utf-8", errors="replace")
64 self.send_response(status)
65 self.send_header("Content-Type", ctype)
66 self.send_header("Content-Length", str(len(data)))
67 self.send_header("Cache-Control", "no-store")
68 self.end_headers()
69 if self.command != "HEAD":
70 self.wfile.write(data)
71
72 def _error(self, status: int, message: str) -> None:
73 self._send(
74 status,
75 f"""<!doctype html><html lang="zh-CN"><head><meta charset="utf-8">
76 <meta name="viewport" content="width=device-width, initial-scale=1">
77 <title>{status} · CC Live Monitor</title><style>{views.CSS}</style></head>
78 <body><div class="wrap"><header class="top"><a href="/">← 返回列表</a>
79 <h1>{status}</h1></header><div class="card">{html.escape(message)}</div>
80 </div></body></html>""",
81 )
82
83 def _query_int(self, query: dict[str, list[str]], key: str, default: int) -> int:
84 try:
85 value = int(query.get(key, [str(default)])[0])
86 except (ValueError, IndexError):
87 return default
88 return max(1, min(MAX_LIMIT, value))
89
90 # ---------- 路由 ----------
91
92 def do_GET(self) -> None: # noqa: N802
93 self._route(head=False)
94
95 def do_HEAD(self) -> None: # noqa: N802
96 self._route(head=True)
97
98 def _route(self, head: bool) -> None:
99 try:
100 parsed = urllib.parse.urlsplit(self.path)
101 parts = [urllib.parse.unquote(p) for p in parsed.path.split("/") if p]
102 query = urllib.parse.parse_qs(parsed.query)
103
104 if not parts:
105 return self._page_list(query)
106 if parts[0] == "healthz":
107 return self._send(HTTPStatus.OK, "ok\n", "text/plain; charset=utf-8")
108 if parts[0] != "run" or len(parts) < 2:
109 return self._error(HTTPStatus.NOT_FOUND, "页面不存在")
110
111 name = parts[1]
112 run = rd.find_run(name, self.runs_dir)
113 if run is None:
114 return self._error(HTTPStatus.NOT_FOUND, f"找不到 run：{name}")
115
116 if len(parts) == 3 and parts[2] == "live":
117 return self._stream_live(run, query)
118 if len(parts) == 2:
… 已截断（仅显示前 4 KB）思考
Now views.py — need sidebar rendering and JS.
读文件/Users/mengmeng/grok-cc-task/cc-live-monitor/views.py
参数
{
"file_path": "/Users/mengmeng/grok-cc-task/cc-live-monitor/views.py"
}结果
1 """HTML 渲染：左侧会话列表 + 右侧聊天主界面 + 原始文件页。
2
3 纯字符串拼接 + html.escape；所有动态文本都必须经过 escape 或 md_lite 渲染。
4 """
5
6 from __future__ import annotations
7
8 import html
9 import os
10 import re
11 import time
12 import urllib.parse
13 from dataclasses import dataclass, field
14
15 import md_lite
16 import runs_data as rd
17 from assets import CHAT_JS, CSS, LIVE_JS # noqa: F401（CSS 供 server 复用）
18 from runs_data import RunInfo, human_size
19 from stream_parse import Draft, Event, Timeline
20
21 DEFAULT_LIST_LIMIT = 60
22 DEFAULT_PAGE_SIZE = 200
23 CHAT_WIDTH = 768
24
25 # 环境噪声：截图占位、技能注入、runner 规则前缀
26 _IMG_NOISE = re.compile(r"^\[Image: original [^\]]*\]$")
27 _SKILL_INJECT = "Base directory for this skill:"
28 _TITLE_PREFIX = re.compile(r"^(目标|任务|task)[:：]\s*", re.I)
29
30
31 # ---------- 小工具 ----------
32
33 def _q(name: str) -> str:
34 return urllib.parse.quote(name, safe="")
35
36
37 def _run_url(run: RunInfo, suffix: str = "") -> str:
38 return "/run/" + _q(run.name) + suffix
39
40
41 def _clip(text: str, limit: int) -> str:
42 text = text.strip()
43 return text if len(text) <= limit else text[: limit - 1] + "…"
44
45
46 def _num(n: int) -> str:
47 return f"{n:,}"
48
49
50 def _when(mtime: float) -> str:
51 """侧栏时间：今天只给时分，昨天给「昨天」，更早给月-日。"""
52 local = time.localtime(mtime)
53 now = time.localtime()
54 yesterday = time.localtime(time.time() - 86_400)
55 if (local.tm_year, local.tm_yday) == (now.tm_year, now.tm_yday):
56 return time.strftime("%H:%M", local)
57 if (local.tm_year, local.tm_yday) == (yesterday.tm_year, yesterday.tm_yday):
58 return "昨天"
59 if local.tm_year == now.tm_year:
60 return time.strftime("%m-%d", local)
61 return time.strftime("%Y-%m-%d", local)
62
63
64 _SEV_CLASS = {"run": "run", "ok": "on", "bad": "off", "warn": "warn"}
65
66
67 def _status_class(run: RunInfo) -> str:
68 """顶栏状态色：红只在真的失败时出现，出口未过 / 已中断走 warn。"""
69 return _SEV_CLASS.get(run.severity, "dim")
70
71
72 def _dot_class(run: RunInfo) -> str:
73 return {"run": "dot run", "bad": "dot bad", "warn": "dot warn"}.get(run.severity, "dot")
74
75
76 def run_title(run: RunInfo) -> str:
77 """会话标题：task.txt 第一行（去掉「目标：」这类前缀），没有就用 run 名。"""
78 text = rd.read_task_head(os.path.join(run.path, "task.txt")) if run.has_task else ""
79 for line in text.splitlines():
80 line = _TITLE_PREFIX.sub("", line.strip().lstrip("#").strip())
81 if line:
82 return _clip(line, 52)
83 return run.name
84
85
86 # ---------- 文本清洗 ----------
87
88 def clean_user_text(text: str) -> str:
89 """剥掉 runner 规则前缀、技能注入、截图占位这类环境噪声。"""
90 text = (text or "").strip()
91 if not text:
92 return ""
93 if text.startswith("[RUNNER RULES"):
94 cut = text.find("[TASK]")
95 if cut >= 0:
96 text = text[cut + len("[TASK]"):].strip()
97 if not text:
98 return ""
99 if text.startswith(_SKILL_INJECT):
100 return ""
101 lines = [ln for ln in text.splitlines() if not _IMG_NOISE.match(ln.strip())]
102 return "\n".join(lines).strip()
103
104
105 # ---------- 工具名 / 结果摘要 ----------
106
107 # 工具名说人话：普通人不需要知道 Bash / ToolSearch 是什么
108 TOOL_LABELS = {
109 "bash": "终端",
110 "shell": "终端",
111 "read": "读文件",
112 "write": "写文件",
113 "edit": "改文件",
114 "multiedit": "改文件",
115 "notebookedit": "改文件",
116 "apply_patch": "改文件",
117 "glob": "找文件",
118 "grep": "搜内容",
119 "toolsearch": "找工具",
120 }
121 TOOL_PRE_LIMIT = 4096 # 展开区单个参数/结果的展示上限（约 4KB）
122
123 _STACK_NOISE = (
124 "Traceback (most recent call last)",
125 "During handling of the above exception",
126 "The above exception was the direct cause",
127 )
128
129
130 def tool_label(name: str) -> str:
131 """工具原名 → 一行能看懂的中文名。未知工具去掉 mcp__ 前缀噪音。"""
132 raw = (name or "").strip()
133 if not raw:
134 return "工具"
135 low = raw.lower()
136 if low.startswith("mcp__lcu__") or "browser" in low or low == "js":
137 return "浏览器"
… 已截断（仅显示前 4 KB）思考
Now assets.py — need CSS / CHAT_JS / LIVE_JS.
读文件/Users/mengmeng/grok-cc-task/cc-live-monitor/assets.py
参数
{
"file_path": "/Users/mengmeng/grok-cc-task/cc-live-monitor/assets.py"
}结果
1 """页面静态资源：CSS 与前端小脚本（无构建、无外部依赖）。"""
2
3 CSS = """
4 :root {
5 --bg: #262624; --side: #1f1e1d; --side-hover: #2a2927; --side-on: #33322f;
6 --fg: #eeece4; --muted: #a09b91; --dim: #7b766d;
7 --line: #3a3835; --line-soft: #322f2c;
8 --accent: #d97757; --user-b: #3a3936; --asst-b: #2e2d2b;
9 --code-bg: #1b1a19; --ok: #6fbf8b; --bad: #e5735c; --warn: #e0a75e;
10 }
11 * { box-sizing: border-box; }
12 html, body { height: 100%; }
13 body {
14 margin: 0; background: var(--bg); color: var(--fg); overflow: hidden;
15 font: 15px/1.7 ui-sans-serif, -apple-system, "PingFang SC", "Helvetica Neue", Arial, sans-serif;
16 -webkit-font-smoothing: antialiased;
17 }
18 a { color: var(--accent); text-decoration: none; }
19 a:hover { text-decoration: underline; }
20 .mono { font-family: ui-monospace, "SF Mono", Menlo, monospace; }
21 .muted { color: var(--muted); }
22 .sub { color: var(--muted); font-size: 12px; }
23 ::-webkit-scrollbar { width: 10px; height: 10px; }
24 ::-webkit-scrollbar-thumb { background: #45433f; border-radius: 6px; border: 3px solid var(--bg); }
25 ::-webkit-scrollbar-thumb:hover { background: #55534e; }
26 ::-webkit-scrollbar-track { background: transparent; }
27
28 /* ================= 外壳：左会话栏 + 右聊天 ================= */
29 .shell { display: flex; height: 100vh; height: 100dvh; }
30
31 .side {
32 width: 274px; flex: none; background: var(--side); border-right: 1px solid var(--line);
33 display: flex; flex-direction: column; min-height: 0;
34 }
35 .side-head { padding: 16px 14px 10px; }
36 .brand { display: flex; align-items: center; gap: 8px; font-size: 14px; font-weight: 600; letter-spacing: .2px; }
37 .brand .mark { color: var(--accent); font-size: 15px; }
38 .brand .ver { color: var(--dim); font-size: 11px; font-weight: 400; }
39 .side-search { margin-top: 12px; }
40 .side-search input {
41 width: 100%; background: #171615; border: 1px solid var(--line-soft); border-radius: 9px;
42 color: var(--fg); padding: 7px 11px; font-size: 13px; outline: none;
43 }
44 .side-search input:focus { border-color: var(--line); background: #141312; }
45 .side-search input::placeholder { color: var(--dim); }
46 .side-list { flex: 1; overflow-y: auto; padding: 4px 8px 12px; }
47 .side-group { color: var(--dim); font-size: 11px; letter-spacing: .06em; padding: 12px 8px 6px; }
48 .item {
49 display: block; padding: 9px 10px; border-radius: 10px; color: var(--fg);
50 border: 1px solid transparent; margin-bottom: 2px;
51 }
52 .item:hover { background: var(--side-hover); text-decoration: none; }
53 .item.on { background: var(--side-on); border-color: var(--line-soft); }
54 .it-title {
55 font-size: 13.5px; line-height: 1.45; overflow: hidden; text-overflow: ellipsis;
56 display: -webkit-box; -webkit-line-clamp: 2; -webkit-box-orient: vertical;
57 }
58 .item.on .it-title { font-weight: 600; }
59 .it-meta { display: flex; align-items: center; gap: 6px; margin-top: 4px; color: var(--dim); font-size: 11.5px; }
60 .dot { width: 6px; height: 6px; border-radius: 50%; background: var(--dim); flex: none; }
61 .dot.run { background: var(--ok); box-shadow: 0 0 0 0 rgba(111, 191, 139, .55); animation: pulse 1.8s infinite; }
62 .dot.bad { background: var(--bad); }
63 .dot.warn { background: var(--warn); }
64 .dot.cx { background: #a78bfa; }
65 @keyframes pulse { 70% { box-shadow: 0 0 0 6px rgba(111, 191, 139, 0); } 100% { box-shadow: 0 0 0 0 rgba(111, 191, 139, 0); } }
66 .side-foot { border-top: 1px solid var(--line-soft); padding: 9px 16px; color: var(--dim); font-size: 11.5px; }
67
68 /* ================= 主区 ================= */
69 .main { flex: 1; min-width: 0; display: flex; flex-direction: column; position: relative; }
70 .top {
71 display: flex; align-items: flex-start; gap: 14px; padding: 13px 24px 12px;
72 border-bottom: 1px solid var(--line-soft); position: relative; z-index: 10; background: var(--bg);
73 }
74 .top-main { min-width: 0; flex: 1; }
75 .top-title {
76 font-size: 15px; font-weight: 600; margin: 0; line-height: 1.4;
77 overflow: hidden; text-overflow: ellipsis; white-space: nowrap;
… 已截断（仅显示前 4 KB）思考
Now I understand the structure. Need to:
1. runs_data.build_run: add fallback live detection based on stream jsonl mtime within 90s and log not done.
2. Add /api/sidebar endpoint returning JSON (id/title/status/severity/live/mtime) and client-side poll every 4-5s, replacing .side-list only when changed, preserving selection and scroll.
3. SSE: ensure live true mounts EventSource — already in views; but if page loaded when not live and becomes live → need auto-connect. Options: the sidebar poll returns live status for current run; if it becomes live, reload page or dynamically inject LIVE_JS. Simpler: when poll detects current run transitioning to live (and page currently has no live source), show a note "已开始实时" and auto-connect by loading the live script. Easiest robust: `location.replace(url + '&_live=1')`? That reloads the page — acceptable but "提示「已开始实时」或自动连 SSE". Let's do auto-connect more elegantly: expose a global function that starts LIVE_JS. But LIVE_JS is an IIFE with constants baked at render time. Could include LIVE_JS template in page always with a `start()` function called when live becomes true. But since live URL needs stream name and since may change... Actually when a run becomes live, the stream file is likely the same default. Since seq: next_seq from page render. We could bake a "potential live" config into the page: `/run/<name>/live?stream=<default>` and since = next_seq. Then a small watchdog JS: poll `/api/run/<name>` every 4s; if live and not connected → inject script to connect (by creating EventSource). Simplest: refactor LIVE_JS into LIVE_JS_CORE with a `window.__ccLive.start(url, since)` that can be called anytime. Then page includes it always (when run exists) with baked default url, and auto-start when `replay.live` OR when poll says live.
Hmm, minimal changes but correct. Let's design:
- `LIVE_JS` becomes a function-based script: it reads `window.CC_LIVE = {url, since, live}` maybe. Keep the existing template replacement but wrap: define `window.__ccLiveStart = function(){...}` and at the end `if (__AUTO__) connect();`. Careful: since `next_seq` needs update. If page rendered with live false and later run becomes live, using since = next_seq from render is fine (server sends backlog from that seq).
But the initial page also may be showing a stale timeline (only last page loaded). If page isn't the last page, live disabled. Fine.
- Sidebar poll endpoint: `GET /api/sidebar?q=&status=&limit=¤t=` returns JSON with items and foot text, plus `live` map maybe. Client JS:
- `SIDEBAR_JS`: every 4.5s fetch `/api/sidebar` + current query from `location.search`; compare JSON signature to previous; if changed, rebuild list items HTML (fetch HTML fragment from server) while preserving scrollTop and current item highlight (server marks `.on` based on `current` param we pass = current run name from `location.pathname`).
- Also returns `live` for current run; if true and no EventSource yet → show note and auto-start live.
Server: return JSON `{sig, html, foot, live: bool, current: {...}}`. Where html = items inner HTML and foot text. Using HTML fragment server-rendered means run_title logic stays in Python. Good.
Let me implement `views.sidebar_items(runs, current_name)` returning HTML string; `views.sidebar_foot(matched, shown)`.
Then in server: `_api_sidebar(query)`: parse q/status/limit, scan, sort by mtime desc, current = query param `current`, also ensure current item included. Return JSON.
Note the list rendering inserts current run at top if not in list — keep that logic in a helper.
4. Footer note text: `只显示 run.sh 写入 ~/grok-cc-task/runs 的会话；Claude/Codex 桌面 App 直开会看不到。` Add to side-foot and footer.
5. Restart monitor on 8787.
6. Selftest: check existing selftest to add a live-fallback test. Let me look at selftest.py.
Also `LIVE_WINDOW_S` etc. Let's check what logic in build_run handles unfinished: for state UNFINISHED and idle >= 2h → interrupted; idle < 1h → "日志无结束行，可能仍在运行" but live stays False.
New fallback: if not live and (rc is None) and any stream/codex jsonl mtime within 90s → live True, status 运行中, state running.
But careful: `_analyse_log_cached` returns state; rc None means no done/exit. We need to know whether log has done rc. States that indicate finished: SUCCESS, FAILED (rc present), BLOCKED. States unfinished/unknown/queued → eligible.
Also if no runner.log at all: state UNKNOWN → eligible if stream mtime recent. Good (Claude/Codex direct? those aren't in runs dir, but a run dir with stream but no log could be manual).
Edge: two-hour interrupted rule — since the fallback requires mtime within 90 seconds, no risk.
Implement helper `_newest_stream_mtime(files)` scanning stream/jsons. Use run.files list.
Also: for SSE endpoint `_stream_live` is only mounted in views when replay.live. With fallback live, this works.
Also the SSE idle check: `if not current.live` → with fallback true only within 90s of last write, so when stream stops for >90s, live flips false and SSE closes with "运行已结束" + reason=status (e.g. "未结束"). That's fine-ish. But wait: a running task might take >90s without writing to stream (long thinking?) Actually thinking streams tokens typically. But a long bash command could take minutes with no stream writes. Then SSE would close and say 运行已结束 incorrectly, and sidebar shows not running. Hmm. Mitigation: keep SSE alive better — when lock absent but stream recently grown, we should be generous. The spec says 90 seconds explicitly. But then a long-running tool call > 90s with no output will drop live. To avoid false "已结束", maybe combine: fallback live = stream mtime within 90s OR (stream mtime within 90s..?) Can't know.
Option: in the SSE idle check, don't stop merely because `current.live` false if the reason is unfinished and stream was growing recently (e.g. last growth < 5 min). Actually existing behavior: closes after 3s idle if not live. With fallback live at 90s, a 3-second silence check on `find_run` — live stays true for 90s after last write, so SSE keeps for 90s after silence. Then closes. Hmm, if a tool runs 5 minutes, it closes; then when new bytes come the page wouldn't reconnect (stopped=true). But sidebar poll will detect live again and auto-restart SSE. That's a nice synergy: sidebar poll auto-connect logic reconnects. I'll make the auto-connect logic able to re-start after being closed (if run.live true again and not connected).
Also mark status text: fallback live detail "stream 最近 Xs 有更新".
Let's be careful with `run.status_detail`.
Let me also check stream_parse get_live / reader for the SSE since handling, but probably fine.
Now let me look at selftest.py to see structure and how tests run.
读文件/Users/mengmeng/grok-cc-task/cc-live-monitor/selftest.py
参数
{
"file_path": "/Users/mengmeng/grok-cc-task/cc-live-monitor/selftest.py"
}结果
1 """Phase 6 自测：状态文案人话化、空目录过滤、工具名映射、错误摘要截断。
2
3 不碰真实 runs：全部 fixture 建在临时目录里。
4
5 python3 selftest.py # 跑断言
6 python3 selftest.py --keep # 保留 fixture 目录，方便起服务手测
7 """
8
9 from __future__ import annotations
10
11 import json
12 import os
13 import shutil
14 import sys
15 import tempfile
16 import time
17
18 import codex_parse
19 import md_lite
20 import runs_data as rd
21 import stream_parse as sp
22 import views
23
24 FIXTURES = []
25
26
27 def w(path: str, text: str) -> None:
28 os.makedirs(os.path.dirname(path), exist_ok=True)
29 with open(path, "w", encoding="utf-8") as f:
30 f.write(text)
31
32
33 def jsonl(path: str, records) -> None:
34 w(path, "\n".join(json.dumps(r, ensure_ascii=False) for r in records) + "\n")
35
36
37 def build(root: str) -> tuple[str, str]:
38 runs_dir = os.path.join(root, "runs")
39 lock_dir = os.path.join(root, "lock")
40
41 # 1) 运行中（pid 用当前进程，锁名匹配目录后缀）
42 live = os.path.join(runs_dir, "20261025-900001-live-demo")
43 w(os.path.join(live, "task.txt"), "目标：实时跟随测试\n第二行说明\n")
44 w(os.path.join(live, "runner.log"), "[09:00:00] attempt 1 model=test-model effort=high hard=600s idle=120s\n")
45 jsonl(os.path.join(live, "stream.jsonl"), [
46 {"type": "system", "subtype": "init", "model": "test-model", "session_id": "s-live"},
47 {"type": "assistant", "message": {"content": [{"type": "text", "text": "正在干活"}]}},
48 ])
49 w(os.path.join(lock_dir, "pid"), str(os.getpid()))
50 w(os.path.join(lock_dir, "name"), "live-demo")
51
52 # 2) 成功 + 3) 失败
53 ok = os.path.join(runs_dir, "20261025-900002-success-demo")
54 w(os.path.join(ok, "task.txt"), "目标：导出 Chrome 书签并合并\n")
55 w(os.path.join(ok, "runner.log"), "[09:01:00] attempt 1 model=m1 effort=low\n[09:02:00] done rc=0\n")
56 w(os.path.join(ok, "RESULT.md"), "完成\n")
57 jsonl(os.path.join(ok, "stream.jsonl"), [
58 {"type": "system", "subtype": "init", "model": "m1", "session_id": "s-ok"},
59 {"type": "user", "message": {"content": [{"type": "text",
60 "text": "[RUNNER RULES - follow strictly]\n- Egress check: 先看 cip.cc\n[TASK]\n"
61 "目标：导出 Chrome 书签并合并\n"}]}},
62 {"type": "assistant", "message": {"content": [
63 {"type": "thinking", "thinking": "先列一遍书签再合并。"}]}},
64 {"type": "assistant", "message": {"content": [
65 {"type": "text", "text": "## 结论\n\n**已合并** 24 条：\n\n- 个人收藏\n- 书签菜单\n\n"
66 "```bash\nls ~/Library/Safari\n```\n"}]}},
67 {"type": "assistant", "message": {"content": [
68 {"type": "tool_use", "id": "tu1", "name": "Bash",
69 "input": {"command": "ls ~/Library/Safari"}}]}},
70 {"type": "user", "message": {"content": [
71 {"type": "tool_result", "tool_use_id": "tu1", "content": "Bookmarks.plist"}]}},
72 ])
73
74 bad = os.path.join(runs_dir, "20261025-900003-failed-demo")
75 w(os.path.join(bad, "task.txt"), "目标：故意失败的任务\n")
76 w(os.path.join(bad, "runner.log"), "[09:03:00] attempt 1 model=m2\nexit rc=3 after 10s\n")
77
78 # 4) 被杀在流式中途：末尾只有 stream_event
79 trunc = os.path.join(runs_dir, "20261025-900004-truncated-demo")
80 w(os.path.join(trunc, "task.txt"), "目标：写到一半被 kill\n")
81 w(os.path.join(trunc, "runner.log"), "[09:04:00] attempt 1 model=m3\nexit rc=137 after 20s\n")
82 jsonl(os.path.join(trunc, "stream.jsonl"), [
83 {"type": "assistant", "message": {"content": [{"type": "text", "text": "已经写完的一段"}]}},
84 {"type": "stream_event", "event": {"type": "message_start", "message": {}}},
85 {"type": "stream_event", "event": {"type": "content_block_delta",
86 "delta": {"type": "text_delta", "text": "最后一段没写完的话"}}},
87 ])
88
89 # 5) Codex rollout 形态
90 codex = os.path.join(runs_dir, "20261025-900005-codex-demo")
91 w(os.path.join(codex, "task.txt"), "目标：修构建\n")
… 已截断（仅显示前 4 KB）思考
Now let me check current state — is server running? Also check README rest & PROGRESS.md tail.
Let me plan the implementation.
### 1. runs_data.py
Add constants:
```python
LIVE_FALLBACK_S = 90 # stream 最近这么久有更新，就当还在跑（锁丢了也不怕）
```
In build_run after lock block:
```python
if not run.live:
fresh = _stream_active_seconds(run) # seconds since newest stream/jsonl mtime, or None
if fresh is not None and fresh <= LIVE_FALLBACK_S and run.state in (STATE_UNFINISHED, STATE_UNKNOWN, STATE_QUEUED):
run.live = True
run.status = "运行中"
run.state = STATE_RUNNING
run.status_detail = f"stream {int(fresh)} 秒前还在更新" # can't assume lock
```
Wait but also need to exclude runs that have done rc. STATE_FAILED/SUCCESS/BLOCKED excluded. QUEUED (waiting for lock) — spec says include queued. Hmm, "若 runner.log 尚无 done rc= / exit rc=（或 state 仍是 unfinished/unknown/queued）". If queued and stream file grows? unusual but fine.
Helper:
```python
def _newest_stream_age(run) -> float | None:
newest = None
for f in run.files:
if not f.name.endswith(".jsonl"):
continue
if not (f.name.startswith("stream") or f.name in run.codex_files):
continue
newest = f.mtime if newest is None else max(newest, f.mtime)
return None if newest is None else max(0.0, time.time() - newest)
```
But run.codex_files calculated before; yes.
Careful ordering: state UNFINISHED logic later at line 414 — since we set state RUNNING, the interrupted block won't run. Good. Lock branch priority: it's checked first.
Also, the fallback live might be set for `STATE_UNKNOWN` when there's no runner.log (state unknown) and stream has grown. Good.
One subtlety: build_run's `_analyse_log` for a live fallback run without `done` gives status "未结束". We overwrite to 运行中.
Also `status_detail` maybe used anywhere in templates? Search: status_detail used only in views? Let's grep later.
### 2. views.py sidebar refactor
Extract:
```python
def sidebar_items(runs, current_name, current_run=None) -> str
def sidebar_foot(matched, shown) -> str
```
And `_sidebar` uses them + includes the note line + `<div class="side-list" id="side-list">`.
Need `.side-list` id for JS. Also each item should carry data-name for highlighting? Server marks `.on` using current param passed by JS. That's simplest.
Add note at bottom of side-foot:
```html
<div class="side-foot"><span>共 N 个会话</span><div class="side-note">只显示 run.sh 写入 ~/grok-cc-task/runs 的会话；Claude/Codex 桌面 App 直开会看不到。</div></div>
```
Footer bottom: also add the same small note in `.foot`? Spec: "页脚/侧栏底部加一行小字". Do both? Put in side-foot (sidebar bottom), and maybe footer has limited room. I'll put it in the sidebar footer (always visible) — that satisfies "页脚/侧栏底部". Actually on narrow screens `.side-foot { display:none }`. Add to main footer too, since footer is always visible. Hmm the footer has live-note etc. Add a `<span class="foot-hint">` at the end. Let me do sidebar only + footer small text. I'll add to footer: `<span class="foot-hint">只显示 run.sh 写入 runs 的会话；桌面 App 直开的看不到</span>`. Fine.
### 3. /api/sidebar endpoint
Server `_route`:
```python
if parts[0] == "api" and len(parts) == 2 and parts[1] == "sidebar":
return self._api_sidebar(query)
```
Also maybe `/api/run/<name>` for current run live status — the sidebar response can include current run's live flag if `current` param given. But detail page might show a run not in first 60 → include current in list, so signature includes it.
Implementation:
```python
def _api_sidebar(self, query):
limit = self._query_int(query, "limit", DEFAULT_LIMIT)
status = ...
keyword = ...
current = (query.get("current") or [""])[0]
runs, total, counts, matched = rd.scan_runs(...)
runs.sort(key=lambda r: r.mtime, reverse=True)
current_run = rd.find_run(current, self.runs_dir) if current else None
html_items = views.sidebar_items(runs, current, current_run)
payload = {
"sig": views.sidebar_sig(runs, current, matched, len(runs)), # or compute client-side by comparing html
"items": html_items,
"foot": views.sidebar_foot(matched, len(runs)),
"counts": counts,
"total": total,
"current": {"name": current, "live": bool(current_run and current_run.live),
"status": current_run.status if current_run else "",
"severity": current_run.severity if current_run else ""},
}
self._send(200, json.dumps(payload, ensure_ascii=False), "application/json; charset=utf-8")
```
Client compares `items + foot` string with previous to decide replace — no separate sig needed. But it must be cheap anyway; scanning each 4.5s already cached partly.
Polling cost: scan_runs over ~500 dirs each 4.5s — os.scandir + stat each file. Fine.
JSON response and `Cache-Control: no-store` already set in `_send`.
### 4. SIDEBAR_JS in assets.py
```js
(function () {
var list = document.getElementById('side-list');
if (!list) return;
var foot = document.getElementById('side-foot');
var current = list.getAttribute('data-current') || '';
var lastKey = list.getAttribute('data-sig') || '';
var lastLive = list.getAttribute('data-live') === '1';
var timer = null;
var busy = false;
function params() {
var q = new URLSearchParams(location.search);
q.delete('current');
...
}
```
Better: server-side compute url in template: bake `__SIDEBAR_URL__` with q/status/limit/current. Then JS appends `&_=Date.now()`. Since if user navigates to a different run we do full page load anyway. So bake URL at render time. Simpler and no query parsing.
```js
function refresh() {
if (busy || document.hidden) return;
busy = true;
fetch(SIDEBAR_URL + '&_=' + Date.now(), {cache:'no-store'})
.then(r => r.ok ? r.json() : null)
.then(function (data) {
busy = false;
if (!data) return;
if (data.items !== lastItems) { lastItems = data.items; swap(data.items); }
if (data.foot !== lastFoot) { ... }
handleLive(data.current);
})
.catch(function(){ busy = false; });
}
function swap(html) {
var top = list.scrollTop;
// keep expanded? items are links only
list.innerHTML = html;
list.scrollTop = top;
}
```
Note `.side-list` scroll position preserved by saving scrollTop. Selection highlight retained because server marks `.on` via current param.
But the `.on` state may change? No, current is fixed for the page.
Auto live start on detail page:
```js
function handleLive(cur) {
if (!cur) return;
var live = !!cur.live;
if (live === lastLive) return;
lastLive = live;
if (window.__ccLive) {
if (live) window.__ccLive.start(); // 开始/恢复实时
else window.__ccLive.signalOff(cur.status);
} else if (live && window.__ccLiveReload) { ... }
}
```
Need LIVE js available on page even when not live. Currently LIVE_JS is injected only when replay.live. Change views.page_chat: always inject LIVE_JS (when run has stream files and is claude flavor and page is last page), with `__AUTO__` = 1 if live. But we need the live URL — compute from replay.stream_name. If not live, the stream_name may be the default one anyway (>_default_stream). If the run later starts a new stream file... edge case, ignore; but on SSE error (404 no stream) we should handle: EventSource onerror path will retry with backoff → infinite 404 retries. So guard: only start if page says the run has stream files (it does).
Implement in assets:
```js
LIVE_JS = """
(function () {
var LIVE_URL = "__LIVE_URL__";
var SINCE = __SINCE__;
var AUTO = __AUTO__;
...
var started = false;
function connect() { ... }
function start() {
if (stopped) { stopped = false; backoff = 1000; } // 重新连
if (source) return;
connect();
}
window.__ccLive = {
start: start,
stop: function(reason) {...},
setNote: setNote
};
if (AUTO) start();
})();
"""
```
Careful: existing `connect()` sets `source`, and onerror closes & schedules reconnect. `source.readyState`... Let's track `source` and set `source = null` on error/close.
When sidebar says live again after SSE closed: `stopped` was set true; start() resets stopped=false and connect(). Since `maxSeq` maintained, since param OK. But when SSE closed with an incomplete bubble, it rendered a partial bubble; reconnecting after more output may duplicate. Hmm. On "closed" we render incomplete draft bubble. If later it becomes live again and more output arrives, the draft would be re-rendered plus old incomplete bubble stays → duplication. To keep minimal & safe: only auto-start when page initially loaded non-live (no SSE ever ran) OR when stopped due to error (not clean closed). Track `closedCleanly`. If closedCleanly → don't auto-restart; instead show note "已结束，刷新页面看后续"? Hmm, but the run may resume... Practically, run.sh writes "done rc" at end; our fallback might make live true again if bytes keep coming after clean close — only if the stream file keeps growing, which means it wasn't done. The SSE close reason was "未结束" due to 90s silence; then more output arrives... that's plausible (long tool call). Reconnecting would give new bytes appended after incomplete bubble → wrong order (incomplete bubble before new events, and draft re-rendered). Acceptable? Slightly messy but better than missing realtime. Alternative: on restart after clean close, remove the last incomplete bubble. We can mark it: when closed with incomplete_html, set `wrap.className='ev ev-incomplete'`; on restart remove `.ev-incomplete`. But events already appended from the file during the gap arrive after. Order: incomplete bubble removed, then SSE sends backlog seqs from maxSeq+1, which include the events that were partial? The draft isn't an event in file; the incomplete bubble was made from draft. Removing it is fine.
I'll implement: `restart()` removes `.ev-incomplete` nodes and re-renders draft empty, then connects. Keep it simple.
Also need "提示「已开始实时」" — setNote('已开始实时', 'live-on').
### 5. views.page_chat changes
- sidebar includes ids and data attrs.
- Always include SIDEBAR_JS when run is not None? Include always (works on list too).
- LIVE_JS injection: condition — run exists and replay.stream_files (claude) and not replay.error and page is last page (page >= pages). If replay.live → AUTO 1; else AUTO 0. But if not live and SSE never needed, injecting EventSource code is harmless (no connection).
Wait: when not live and the page shows a non-last page, no live. Keep requiring `replay.page >= replay.pages`.
Hmm, replay.live already requires run.live && not codex. For non-live page, we need stream_name even when replay has timeline. Use replay.stream_name or `_default_stream`. `_build_replay` sets stream_name always when playable files exist. Good.
- Footer note text.
### 6. SSE headers — already good (`X-Accel-Buffering: no`, Cache-Control no-cache). Keep.
### 7. selftest additions
Add fixture #12: run with no done rc, stream mtime now (fresh) but no lock → live True, status 运行中. And fixture #13: stale stream mtime 10 min ago, no done → not live and status 未结束 (or 已中断 if >2h). Need to update counts (total 10 → 12, counts running 1 → 2, success 4, failed 2).
Careful: `os.utime` on the old stale run dir — the stale fixture #10 has no stream, fine. New fixture #12 stream mtime = now → live. This changes counts. Update assertions.
Also test `views.sidebar_items` includes live class/status, and API JSON? Could test the handler? Simpler: test `views.sidebar_items` + `views.sidebar_foot`. And maybe test the server endpoint via a live HTTP request in selftest? That's heavier; existing selftest doesn't test server. I'll add a light check calling server handler? Could spin up Server in thread with fixture runs dir on an ephemeral port and fetch /api/sidebar with urllib. That's a real integration check and cheap. Let's do it — bounded with timeout. Yes, worth it: verifies route wiring.
Also the "临时假 run 目录 + append + 侧栏出现运行中 + SSE 增量" manual test. I'll do that against the live server with curl.
Let me now check whether server currently runs.
Also PROGRESS.md update.
Let me check PROGRESS.md tail to match format.
终端cd ~/grok-cc-task/cc-live-monitor && tail -60 PROGRESS.md && echo "=== running? ===" && lsof -ti tcp:8787 -sTCP:LISTEN …
参数
{
"command": "cd ~/grok-cc-task/cc-live-monitor && tail -60 PROGRESS.md && echo \"=== running? ===\" && lsof -ti tcp:8787 -sTCP:LISTEN && ps -o pid,command -p $(lsof -ti tcp:8787 -sTCP:LISTEN) 2>/dev/null",
"description": "查看 PROGRESS 尾部与 8787 进程"
}结果
目标：**普通人一眼只看到「会话名 + 你/它聊天气泡」**，工具和失败信息默认不抢戏。 ### 问题 真实数据里 328 个目录：43 个「出口检查失败」、25 个「无 runner.log」、25 个「未结束」、8+4+2+2 个「失败（rc=…）」。侧栏一共 60 条，几乎每条都挂着红点或工程黑话，读起来像故障大盘而不是会话列表。工具行里 `mcp__lcu__js`、`ToolSearch` 这种名字对非技术读者等于噪音；出错时展开区还直接顶一大段 stderr。 ### 做法 1. **状态说人话**（`runs_data.py`） - 新增 `RunInfo.state`（running / success / failed / blocked / interrupted / queued / unfinished / unknown）——`status` 只负责文案，`state` 负责判断；`rc` 从文案挪到 `status_detail`。 - `出口检查失败` → **出口未过**；`失败（rc=N）` → **未完成**；`排队等锁` → **排队中**；`未结束` 且目录超过 2 小时没更新 → **已中断**；没有 `runner.log` 但有 jsonl → **无记录**。 - 新增 `RunInfo.severity`：只有「未完成」是 `bad`（红点），出口未过 / 已中断是 `warn`（暖黄），其余灰。`category` 也跟着改：出口未过不再算 failed，不会被置顶成一片红。 - `RunInfo.is_placeholder`：没有 `runner.log` 也没有任何 `.jsonl` 的目录（例如 `medbox-fav` 那种截图/文本碎片夹）在 `scan_runs` 里直接过滤掉（328 → 316），总数、计数、筛选都不再算它们；直接访问 URL 仍可看文件。 2. **工具名映射**（`views.py: tool_label`） - `Bash` → 终端，`Read/Write/Edit/Glob/Grep` → 读文件 / 写文件 / 改文件 / 找文件 / 搜内容，`ToolSearch` → 找工具，`mcp__lcu__*` / 含 `browser` / `js` → 浏览器，Codex 的 `shell` / `apply_patch` 也顺手映射。 - 其它 MCP 工具去掉 `mcp__` 前缀（`mcp__iphone-use__phone_status` → `iphone-use__phone_status`），原名留在 `title` 属性里方便排查。 - 折叠摘要（`data-name`）和展开后的标题用的是同一个映射，所以一行「调用了 终端 · 浏览器」点开也还是中文。 3. **出错摘要 + 截断** - `error_brief()`：跳过 `Traceback (...)`、`File "..."`、`at ...` 这类堆栈行，取第一条有效信息压成一行 80 字短句，放在「出错」标签后面；完整 stderr 仍在展开区。 - `_pre()`：参数/结果超过 4KB 截断（尽量切在换行处），末尾注明「… 已截断（仅显示前 4 KB）」。 4. **折叠更彻底**：`incomplete` 气泡和流式草稿里的「思考」都不再默认 `open`，统一收成一行小字。 5. **样式**（`assets.py`）：新增 `.dot.warn`（暖黄）、`.st.dim`（灰）、`.tbrief`（错误摘要小字）；`LIVE_JS` 在任务结束时按人话状态上色（成功绿 / 未完成红 / 出口未过、已中断暖黄 / 排队中灰），不再一律「已结束」红字。 ### 验收（本机与 HTTPS 同一套页面） ```text 侧栏 顶栏 ● 运行中 · 17:02 标题 成功 · 16:36 ● 出口未过 · 9分34秒 · model · 17 条事件 · 更新 10-25 10:01 已中断 · 12:55 未完成 · 16:15 ▸ 思考 412 字 排队中 · 11:43 ⚙ 调用了 终端 · 浏览器（4 次） 无记录 · 10-23 └ 展开后：终端 ls ~/x 出错 Exit code 1 ``` - 侧栏 60 条里不再出现「出口检查失败」「失败（rc=…）」；红点只剩 16 个真正的非零退出。 - 打开有工具的会话（如 `20261024-210959-qoder-desktop-claim`），工具行读作「调用了 找工具 · 浏览器 · 终端 · 读文件」，原文 `mcp__lcu__js` 只出现在 `title` 里。 ### 变更文件 | 文件 | 变化 | |------|------| | `runs_data.py` | 状态文案人话化 + `state` / `severity` / `is_placeholder`；空工件目录过滤；2 小时判「已中断」 | | `views.py` | `tool_label` / `error_brief` / `_pre`；侧栏圆点与顶栏配色分级；incomplete 与草稿的思考默认折叠 | | `assets.py` | `.dot.warn` / `.st.dim` / `.tbrief`；`LIVE_JS` 结束时按人话状态上色 | | `selftest.py` | 新增出口未过 / 已中断 / 排队中 / 空目录 / 工具名 / 错误摘要 / 4KB 截断断言 | | `README.md` / `PROGRESS.md` | 状态判定表、Phase 6 说明；顺手修正过时的「只绑 127.0.0.1」描述 | **Phase 6 — 完成。** 服务已用 `nohup python3 server.py >> server.log 2>&1 &` 重启，仍绑 `0.0.0.0:8787`。 ## 后续可做（未开始） 1. **回放细节**：Edit/Write 的 diff 视图、Bash 输出按 ANSI 着色、超长结果「加载更多」。 2. **对比与聚合**：同一任务多次尝试并排对比；按天统计成功率与耗时分布；token / 费用汇总。 3. **Codex 深化**：真实 Codex 产物接入后补字段映射；支持 Codex 的增量跟随。 4. **列表性能**：runs 数量再上一个量级时，考虑后台线程预热缓存或落盘索引。 === running? === 80477 PID COMMAND 80477 /opt/homebrew/Cellar/python@3.14/3.14.4_1/Frameworks/Python.framework/Versions/3.14/Resources/Python.app/Contents/MacOS/Python server.py
终端cd ~/grok-cc-task/cc-live-monitor && sed -n 50,140p README.md && echo "=== grep status_detail ===" && grep -rn "status_…出错Exit code 1
参数
{
"command": "cd ~/grok-cc-task/cc-live-monitor && sed -n 50,140p README.md && echo \"=== grep status_detail ===\" && grep -rn \"status_detail\" --include=*.py . && echo \"=== runs dirs ===\" && ls ~/grok-cc-task/runs | tail -5 && ls ~/grok-cc-task/runs | wc -l",
"description": "看 README 剩余与 runs 情况"
}结果
Exit code 1 | `/?q=chrome` | 侧栏搜索：run 名 + `task.txt` 前 4 KB，多词 AND，大小写不敏感 | | `/?status=running\|success\|failed\|all` | 仍然支持状态过滤（无 UI，给脚本用），非法值回落 `all` | | `/run/<name>` | 同一个会话界面，右侧切到指定 run | | `/run/<name>?page=2&size=200` | 聊天的早期事件分页，默认 200 条/页（上限 300） | | `/run/<name>?stream=stream.2.jsonl` | 多次尝试时指定 stream 文件；默认取体积最大的那个 | | `/run/<name>/live?stream=<file>&since=<seq>` | SSE 实时流：`meta` / `append` / `update` / `draft` / `closed` / `reset` | | `/run/<name>/file/<file>` | 目录内单个文件原文（大文件截断到 400 KB） | | `/healthz` | 健康检查，返回 `ok` | ## 文件 | 文件 | 作用 | |------|------| | `runs_data.py` | 扫描 runs、解析 `runner.log`（状态 / 模型 / effort / 耗时）、筛选/搜索/置顶、安全路径校验 | | `stream_parse.py` | `stream.*.jsonl` → 时间线（事件 + 元数据 + 统计）；SSE 增量读取；末尾未闭合草稿兜底 | | `codex_parse.py` | Codex 产物识别与解析（rollout / 旧版 `msg`），映射到同一套 `Timeline/Event` | | `views.py` | HTML 渲染（会话壳 / 聊天气泡 / 文件页），纯字符串 + `html.escape` | | `md_lite.py` | 极简 Markdown → HTML（标题 / 列表 / 代码块 / 行内代码 / 粗斜体 / 链接 / 引用），先转义再套标记 | | `assets.py` | 页面 CSS 与前端脚本（工具调用合并成一行、SSE 跟随、滚动暂停/恢复） | | `server.py` | 标准库 `http.server`，路由与绑定 `0.0.0.0:8787`（局域网/手机可访问） | | `selftest.py` | Phase 5 自测：fixture 覆盖筛选/搜索/置顶、不完整草稿、Codex 兼容、聊天渲染与噪声剥离 | ## 对话回放怎么解析的 - `stream_event`（增量）与 `assistant` 全量消息内容重复，**只保留后者**，约 99% 的行在这一步被跳过。 - `system/thinking_tokens`、`system/status` 属于高频噪音，丢弃（只计数）。 - `tool_result` 按 `tool_use_id` 挂回对应的工具调用。 - 用户侧文本会先洗一遍：剥掉 `[RUNNER RULES …] … [TASK]` 前缀、`[Image: original …]` 截图占位、`Base directory for this skill:` 技能注入；洗空的消息不显示。 - `system/init` 提供 model / session_id / cwd / 权限模式 / CC 版本；`effort` 从 `runner.log` 的 `attempt … effort=…` 行取。 - 未知 type / 未知 block / 坏 JSON 一律降级成可折叠的原始记录，不会让整页崩掉。 - 0 字节的 `stream.N.jsonl`（空重试）会被跳过，默认选体积最大的文件。 分页与截断：单页默认 200 条事件；单条文本 20,000 字符、工具输入 6,000 字符、工具结果 8,000 字符，超出会标注截断长度。 **被杀运行的最后一段**：如果文件末尾只有 `stream_event` 增量、没有对应的完整 `assistant` 消息，回放会只读末尾 768 KB 重放出未闭合草稿，落成一条黄色虚线气泡（标「不完整 · 最后一段输出 · 运行中断，未收到完整消息」），不会丢字。运行中的 run 不走这个兜底，改由 SSE 草稿实时展示；结束时 `closed` 事件会把草稿落成同样的气泡。 ## Codex 产物 runs 目录里出现 Codex CLI 的记录时，不用改配置： - 识别：文件名命中 `agent-*.jsonl` / `events.jsonl` / `rollout-*.jsonl` / `codex*.jsonl`，或内容嗅探到 `session_meta` / `response_item` / `turn_context` / `event_msg` / `compacted` / 旧版 `msg`。普通 jsonl（如 `cleanup.jsonl`）不会被误判。 - 列表页打紫色「Codex」徽标；记录列同时显示 Claude stream 与 Codex 文件数。 - 详情页用同一套时间线：user / thinking / assistant（署名 `Codex`）/ 工具卡（`function_call` + 结果按 `call_id` 挂回，失败标红）/ 结果 / 原文折叠区。分页、多文件切换照常。 - meta 对齐 Claude：model、cwd、session_id、版本、provider、权限模式、effort、sandbox。 - 认不出的记录折叠成原始 JSON（最多 300 条），坏行只计数，不会让页面崩。 - Codex 文件暂不支持 SSE 实时跟随，运行中的 Codex run 改为 5 秒整页刷新。 ## 状态判定 依据 `runner.log` 头尾内容（避免整读几十 MB）： 界面上只显示人话状态，`rc` 这类原始信息收进 `status_detail`，不占正文： | 判定 | 侧栏 / 顶栏文案 | 圆点 | |------|----------------|------| | `done rc=0` | 成功 | 灰 | | `rc≠0` | 未完成（`rc` 记在详情，可能附带「曾自动重试一次」） | 红（真失败） | | `EGRESS FAIL` | 出口未过 | 暖黄 | | `waiting for lock` 且无 attempt | 排队中 | 灰 | | 有 `.browser.lock` 且 pid 存活、run 名匹配 | 运行中 | 绿（呼吸） | | 日志没有结束行，且目录超过 2 小时没更新 | 已中断 | 暖黄 | | 日志没有结束行，但刚更新过 | 未结束 | 灰 | | 没有 `runner.log` 但有 jsonl | 无记录 | 灰 | 没有 `runner.log` 也没有任何 `.jsonl` 的目录（截图/文本碎片工件夹）在列表里直接不显示，直接访问 URL 仍可查看文件。 检测到运行中任务时，列表页每 10 秒自动刷新；详情页不再整页刷新，改由 SSE 增量推送。 ## 实时跟随（Phase 3–4） - 服务端每 0.4 秒检查一次文件大小，只读新增的完整行（行中间不切），同一文件全局只有一个 `StreamReader`，事件序号 `seq` 对所有连接稳定一致。 - `assistant` / `user` / `system` / `result` 记录落成正式事件；`stream_event` 增量只喂一个临时的「正在输出」草稿气泡，不写入正式事件——所以回放和实时看到的是同一套 `seq`，重连时用 `?since=` 接上不会重也不会漏。 - 工具结果晚到会原位更新那张工具卡（`update` 事件），折叠状态由前端保留。 - 断线后 1 秒起按 1→2→4→8→10 秒退避重连，重连即补发断线期间的全部事件。 - 任务结束（锁消失 / `done` 行出现）时推 `closed`，页面把状态改成「已结束」并停止连接；若当时还有未闭合草稿，会一并推成「不完整」气泡。 - **上滚自动暂停**：用户往上滚超过 2px 就取消跟随，新事件只累计右下角「↓ 跳到最新（N 条新内容）」，不拽滚动条；滚回底部（或点按钮）自动恢复。程序滚动后 700ms 内的 scroll 事件会被忽略，避免误判。 - 跟随判断作用在聊天区自己的滚动容器 `#scroller` 上（页面本身不滚动），距底部 110px 内算「在底部」。 - 新到的工具调用会就地并进上一条「调用了 …」标签里（前端按 `data-kind` 重新分组，`update` 事件照旧能定位到对应 `seq`）。 ## 自测 ```bash cd ~/grok-cc-task/cc-live-monitor && python3 selftest.py ``` 全部 fixture 建在临时目录，不碰真实 runs；覆盖状态筛选、关键字搜索、置顶顺序、被杀运行的不完整气泡、Codex 映射与未知记录降级，以及聊天界面（侧栏、task 气泡、Markdown、工具行标记、思考折叠、噪声剥离）。Phase 6 起额外覆盖状态文案映射、空工件目录过滤、圆点分级、工具名映射、错误摘要与 4KB 截断。加 `--keep` 保留 fixture，方便起服务手测。 … 已截断（仅显示前 4 KB）
思考
The grep failed due to zsh globbing; run again quoted. Also `status_detail` usage.
Also README says "检测到运行中任务时，列表页每 10 秒自动刷新" — need to update to 4-5s polling description.
Let me grep.
终端cd ~/grok-cc-task/cc-live-monitor && grep -rn "status_detail" *.py; echo "=== lock ==="; cat ~/grok-cc-task/.browser.lo…
参数
{
"command": "cd ~/grok-cc-task/cc-live-monitor && grep -rn \"status_detail\" *.py; echo \"=== lock ===\"; cat ~/grok-cc-task/.browser.lock/pid 2>/dev/null; cat ~/grok-cc-task/.browser.lock/name 2>/dev/null; echo; echo \"=== recent runs mtime ===\"; ls -lt ~/grok-cc-task/runs | head -5",
"description": "检查 status_detail 引用与锁状态"
}结果
runs_data.py:68: status_detail: str = ""
runs_data.py:401: run.status_detail = meta["detail"]
runs_data.py:412: run.status_detail = f"pid {lock_pid}"
runs_data.py:420: run.status_detail = f"日志没有结束行，已经 {int(idle // 3600)} 小时没更新"
runs_data.py:423: run.status_detail = "日志无结束行，可能仍在运行"
selftest.py:275: check("rc=" not in failed_run.status and "rc=3" in failed_run.status_detail, "rc 收进详情，不占状态文案")
=== lock ===
3392
cc-live-realtime
=== recent runs mtime ===
total 504024
drwxr-xr-x@ 6 mengmeng staff 192 10月 25 20:09 20261025-200930-cc-live-realtime
drwxr-xr-x@ 6 mengmeng staff 192 10月 25 17:02 20261025-170245-cc-live-clean-ui
drwxr-xr-x 12 mengmeng staff 384 10月 25 16:41 medbox-fav
drwxr-xr-x@ 7 mengmeng staff 224 10月 25 16:36 20261025-163458-medbox-yellow思考
Interesting: the current run is 20261025-200930-cc-live-realtime, lock says cc-live-realtime. But pid 3392 — is it alive? Lock parent pid maybe. Anyway.
Now implement. Start with runs_data.py.
Note: for fallback eligibility I need to know if log says done. `run.state` after log analysis: SUCCESS/FAILED/BLOCKED/UNFINISHED/UNKNOWN/QUEUED. Exclude SUCCESS/FAILED/BLOCKED. Also the interrupted state check happens after — but with a fresh stream within 90s, idle can't be ≥2h, so no conflict. Put fallback before the interrupted check.
Also need to consider run dir mtime for interrupted: uses st.st_mtime of dir, which may not update with file writes inside (dir mtime changes only on file create/delete). Anyway.
Write the code.
改文件/Users/mengmeng/grok-cc-task/cc-live-monitor/runs_data.py
参数
{
"replace_all": false,
"file_path": "/Users/mengmeng/grok-cc-task/cc-live-monitor/runs_data.py",
"old_string": "LIVE_WINDOW_S = 3600\nINTERRUPTED_AFTER_S = 2 * 3600 # 「未结束」超过这么久没动静，当成中断了",
"new_string": "LIVE_WINDOW_S = 3600\nINTERRUPTED_AFTER_S = 2 * 3600 # 「未结束」超过这么久没动静，当成中断了\nLIVE_FALLBACK_S = 90 # 没有锁时，stream 最近这么久还在长，就当它还在跑"
}结果
The file /Users/mengmeng/grok-cc-task/cc-live-monitor/runs_data.py has been updated successfully. (file state is current in your context — no need to Read it back)
改文件/Users/mengmeng/grok-cc-task/cc-live-monitor/runs_data.py
参数
{
"replace_all": false,
"file_path": "/Users/mengmeng/grok-cc-task/cc-live-monitor/runs_data.py",
"old_string": "def build_run(name: str, run_path: str, lock_pid: int, lock_name: str) -> RunInfo:",
"new_string": "def _newest_record_age(run: RunInfo) -> float | None:\n \"\"\"最近一次写入 stream / Codex 记录距今多少秒；没有记录返回 None。\"\"\"\n newest = None\n for f in run.files:\n if not f.name.endswith(STREAM_SUFFIX):\n continue\n if not (f.name.startswith(\"stream\") or f.name in run.codex_files):\n continue\n newest = f.mtime if newest is None else max(newest, f.mtime)\n if newest is None:\n return None\n return max(0.0, time.time() - newest)\n\n\ndef build_run(name: str, run_path: str, lock_pid: int, lock_name: str) -> RunInfo:"
}结果
The file /Users/mengmeng/grok-cc-task/cc-live-monitor/runs_data.py has been updated successfully. (file state is current in your context — no need to Read it back)
改文件/Users/mengmeng/grok-cc-task/cc-live-monitor/runs_data.py
参数
{
"replace_all": false,
"file_path": "/Users/mengmeng/grok-cc-task/cc-live-monitor/runs_data.py",
"old_string": " # 正在跑：锁里的 run 名是本目录名的后缀，且进程还活着\n if lock_pid and lock_name and _pid_alive(lock_pid) and name.endswith(\"-\" + lock_name):\n run.live = True\n run.status = \"运行中\"\n run.state = STATE_RUNNING\n run.status_detail = f\"pid {lock_pid}\"\n",
"new_string": " # 正在跑：锁里的 run 名是本目录名的后缀，且进程还活着\n if lock_pid and lock_name and _pid_alive(lock_pid) and name.endswith(\"-\" + lock_name):\n run.live = True\n run.status = \"运行中\"\n run.state = STATE_RUNNING\n run.status_detail = f\"pid {lock_pid}\"\n\n # 兜底：锁被清掉 / 不是 run.sh 起的，只要记录文件还在长，也算运行中\n if not run.live and run.state in (STATE_UNFINISHED, STATE_UNKNOWN, STATE_QUEUED):\n age = _newest_record_age(run)\n if age is not None and age <= LIVE_FALLBACK_S:\n run.live = True\n run.status = \"运行中\"\n run.state = STATE_RUNNING\n run.status_detail = f\"记录 {int(age)} 秒前还在更新\"\n"
}结果
The file /Users/mengmeng/grok-cc-task/cc-live-monitor/runs_data.py has been updated successfully. (file state is current in your context — no need to Read it back)
思考
Wait: the lock branch runs regardless of state — a run with `done rc=0` but lock still present would be shown live. That's existing behavior; keep.
Now views.py sidebar refactor. I need:
```python
SIDEBAR_NOTE = "只显示 run.sh 写入 ~/grok-cc-task/runs 的会话；Claude/Codex 桌面 App 直开会看不到。"
def sidebar_items(runs, current_name, current_run=None) -> str: ...
def sidebar_foot(matched, shown) -> str: ...
def _sidebar(...)-> full aside with ids
```
Also the aside needs baked data for JS: `data-current`, `data-live`. And a script URL. I'll construct SIDEBAR_JS with placeholders replaced in views.
Let me write.
For the sidebar list container, add `id="side-list"`. For foot `id="side-foot"`.
The footer note inside side-foot: `<div class="side-note">…</div>`.
Now page_chat: add SIDEBAR_JS with __SIDEBAR_URL__ baked.
URL: `/api/sidebar?` + urlencode({q, status, limit, current}). The JS appends `&_=ts`.
Current name: run.name if run else "".
Should the sidebar poll run on the list page too? Yes (run may be None). The auto-live part is no-op then.
Now, live JS on non-live pages. Let's modify LIVE_JS in assets to a startable module.
Rewrite LIVE_JS:
```js
LIVE_JS = """
(function () {
var LIVE_URL = "__LIVE_URL__";
var SINCE = __SINCE__;
var AUTO = __AUTO__;
...
var started = false, stopped = false, finished = false;
function connect() {
if (stopped || !LIVE_URL) return;
if (source) { try { source.close(); } catch (e) {} source = null; }
source = new EventSource(...);
...
source.addEventListener('closed', function(){ finished = true; stopped = true; ...});
}
function start(reason) {
if (finished) { /* 清理上一次结束气泡 */ }
stopped = false;
if (!started) { started = true; }
connect();
}
window.__ccLive = {start: start, ...};
if (AUTO) start();
})();
"""
```
Careful with existing variables: `source`, `stopped`, `backoff`.
When sidebar poll calls start() while source already open (open EventSource), it should no-op: `if (source && source.readyState !== 2) return;`.
On error path: `source.close()` then `source = null`; retry via setTimeout(connect).
On closed: `finished = true; stopped = true;` — if a later start() occurs, remove incomplete bubble `.ev-incomplete` and reset `finished=false`. Since server sends 'closed' on clean end, but if run resumes writing (fallback live again), the events after will be appended; the incomplete bubble removed. Acceptable.
Also when we restart, we should set note to "已开始实时".
Let's write the full new LIVE_JS. Also add `window.__ccLive.setOff(status)`? For when sidebar says no longer live and SSE didn't already close: SSE will close itself within ~3s of idle once find_run says not live (which now takes 90s after last write). Actually SSE's idle check calls rd.find_run and sees live true during 90s; after 90s it closes and reports reason=状态. Fine, no need for JS to force close. But if sidebar poll detects live false earlier than SSE close, no action needed.
However: when page loaded non-live and the run becomes live → auto start. Good.
Also handle: page loaded non-live, run stays non-live, but new events appear in the file (because stream was appended within the poll window?). Then SSE starts when live flips true. Fine.
One more: on non-live pages, LIVE_JS is injected; if run has no stream files (codex-only), don't inject.
Now the sidebar JS:
```js
SIDEBAR_JS = """
(function () {
var SIDEBAR_URL = "__SIDEBAR_URL__";
var POLL_MS = __POLL_MS__;
var list = document.getElementById('side-list');
var foot = document.getElementById('side-foot');
var note = document.getElementById('live-note');
if (!list) return;
var lastItems = list.getAttribute('data-sig') || '';
var lastFoot = foot ? foot.getAttribute('data-sig') || '' : '';
var wasLive = list.getAttribute('data-live') === '1';
var busy = false;
var ticking = false;
function swap(html) {
var top = list.scrollTop;
list.innerHTML = html;
list.scrollTop = top;
}
...
})();
"""
```
Hmm initial `data-sig` on the list: server can set it to a hash of current items HTML, avoiding the first poll rewriting. Simpler: compare fetched `items` with a JS-side snapshot taken from `list.innerHTML` at start. But server markup vs browser-innerHTML serialization may differ slightly (browser normalizes attributes). Could cause one replacement on first poll — harmless (scroll preserved). To avoid, let server send `sig` and set data-sig from same value; JS compares data.sig !== data-sig attr. Good, compute sig server-side as sha1/md5 of items+foot+current.live. Use hashlib.
Payload: `{sig, items, foot, current: {name, live, status}}`. Where sig includes live flag so change detected for the live part too. Let's define sig = md5(items + foot + "|" + ("1" if live else "0")).
JS:
```js
function apply(data) {
if (!data) return;
if (data.items !== undefined && list.innerHTML !== data.items) { ... }
}
```
I'd rather trust sig:
```js
if (data.sig !== lastSig) { swap(data.items); if (foot && data.foot !== lastFootHtml) foot.innerHTML = data.foot; lastSig = data.sig; }
```
But swapping items on live change only (items includes "运行中" text so it changes anyway). Fine — swap whenever sig changes.
Preserve scroll position of window too? Page doesn't scroll (body overflow hidden). Side list scrollTop preserved. Good.
Also preserve search box focus? We don't touch it.
The live hint: when sidebar detects current run live and previously not → call window.__ccLive.start(). Show note "已开始实时". When it detects not live but page had live → note? SSE closes on its own.
Also update top bar status on live start: `.top-meta .st` — set to run with class run. Do it in JS when starting:
```js
var st = document.querySelector('.top-meta .st');
if (st) { st.className='st run'; st.innerHTML='<span class="dot"></span>运行中'; }
```
Do that inside LIVE_JS start() maybe. Good, centralizing in start().
Now server `/api/sidebar`. Also `/api/sidebar` needs to include current run even if outside list — the same as `_sidebar`.
Let me write views helpers.
I'll restructure `_sidebar`:
```python
def sidebar_items(runs, current_name, current_run=None) -> str:
items = [_sidebar_item(run, current_name) for run in runs]
if current_run is not None and not any(run.name == current_run.name for run in runs):
items.insert(0, _sidebar_item(current_run, current_name))
if not items:
return ...empty hint...
return "".join(items)
```
Need query for empty hint; pass query param too. Keep signature `sidebar_items(runs, current_name, current_run=None, query="")`.
`sidebar_foot(matched, shown)` returns HTML inner for the foot:
```python
def sidebar_foot(matched: int, shown: int) -> str:
text = f"共 {matched} 个会话"
if matched > shown:
text += f" · 显示最近 {shown} 个"
return (f'<span class="side-count">{text}</span>'
f'<div class="side-note">{SIDEBAR_NOTE}</div>')
```
`_sidebar` builds aside with ids, data-sig? sig computed in server or views. I'll add `sidebar_sig(items_html, foot_html, live)`.
Now implement.
C
Now 改 views.py 的侧栏，拆成可复用的片段：
改文件/Users/mengmeng/grok-cc-task/cc-live-monitor/views.py
参数
{
"replace_all": false,
"file_path": "/Users/mengmeng/grok-cc-task/cc-live-monitor/views.py",
"old_string": "import html\nimport os\nimport re\nimport time\nimport urllib.parse\nfrom dataclasses import dataclass, field\n\nimport md_lite\nimport runs_data as rd\nfrom assets import CHAT_JS, CSS, LIVE_JS # noqa: F401（CSS 供 server 复用）\nfrom runs_data import RunInfo, human_size\nfrom stream_parse import Draft, Event, Timeline\n\nDEFAULT_LIST_LIMIT = 60\nDEFAULT_PAGE_SIZE = 200\nCHAT_WIDTH = 768",
"new_string": "import hashlib\nimport html\nimport os\nimport re\nimport time\nimport urllib.parse\nfrom dataclasses import dataclass, field\n\nimport md_lite\nimport runs_data as rd\nfrom assets import CHAT_JS, CSS, LIVE_JS, SIDEBAR_JS # noqa: F401（CSS 供 server 复用）\nfrom runs_data import RunInfo, human_size\nfrom stream_parse import Draft, Event, Timeline\n\nDEFAULT_LIST_LIMIT = 60\nDEFAULT_PAGE_SIZE = 200\nCHAT_WIDTH = 768\nSIDEBAR_POLL_MS = 4500 # 侧栏多久拉一次增量（秒级太吵，十秒级又不够实时）\nSIDEBAR_NOTE = \"只显示 run.sh 写入 ~/grok-cc-task/runs 的会话；Claude/Codex 桌面 App 直开会看不到。\""
}结果
The file /Users/mengmeng/grok-cc-task/cc-live-monitor/views.py has been updated successfully. (file state is current in your context — no need to Read it back)
改文件/Users/mengmeng/grok-cc-task/cc-live-monitor/views.py
参数
{
"replace_all": false,
"file_path": "/Users/mengmeng/grok-cc-task/cc-live-monitor/views.py",
"old_string": "def _sidebar(\n runs: list[RunInfo],\n current: RunInfo | None,\n total: int,\n matched: int,\n query: str,\n) -> str:\n items = [_sidebar_item(run, current.name if current else \"\") for run in runs]\n if current is not None and not any(run.name == current.name for run in runs):\n items.insert(0, _sidebar_item(current, current.name))\n if not items:\n hint = (\n f'<div class=\"empty\" style=\"padding:24px 10px\">没有匹配「{html.escape(query)}」的会话</div>'\n if query else '<div class=\"empty\" style=\"padding:24px 10px\">还没有会话记录</div>'\n )\n body = hint\n else:\n body = \"\".join(items)\n foot = f\"共 {matched} 个会话\"\n if matched > len(runs):\n foot += f\" · 显示最近 {len(runs)} 个\"\n return f\"\"\"<aside class=\"side\">\n <div class=\"side-head\">\n <div class=\"brand\"><span class=\"mark\">✳</span>CC Live<span class=\"ver\">本地回放</span></div>\n <form class=\"side-search\" method=\"get\" action=\"/\">\n <input type=\"search\" name=\"q\" value=\"{html.escape(query, quote=True)}\" placeholder=\"搜索会话\">\n </form>\n </div>\n <div class=\"side-list\">{body}</div>\n <div class=\"side-foot\">{foot}</div>\n</aside>\"\"\"",
"new_string": "def sidebar_items(\n runs: list[RunInfo],\n current_name: str,\n current_run: RunInfo | None = None,\n query: str = \"\",\n) -> str:\n \"\"\"侧栏条目 HTML（不含外层 .side-list，服务端整页与 /api/sidebar 共用）。\"\"\"\n items = [_sidebar_item(run, current_name) for run in runs]\n if current_run is not None and not any(run.name == current_run.name for run in runs):\n items.insert(0, _sidebar_item(current_run, current_name))\n if not items:\n if query:\n return f'<div class=\"empty\" style=\"padding:24px 10px\">没有匹配「{html.escape(query)}」的会话</div>'\n return '<div class=\"empty\" style=\"padding:24px 10px\">还没有会话记录</div>'\n return \"\".join(items)\n\n\ndef sidebar_foot(matched: int, shown: int) -> str:\n text = f\"共 {matched} 个会话\"\n if matched > shown:\n text += f\" · 显示最近 {shown} 个\"\n return (\n f'<span class=\"side-count\">{text}</span>'\n f'<div class=\"side-note\">{html.escape(SIDEBAR_NOTE)}</div>'\n )\n\n\ndef sidebar_sig(items_html: str, foot_html: str, live: bool) -> str:\n \"\"\"只在内容真变了才替换 DOM，避免每 4.5 秒重排一次。\"\"\"\n raw = f\"{items_html}\\n{foot_html}\\n{1 if live else 0}\"\n return hashlib.md5(raw.encode(\"utf-8\")).hexdigest()[:12]\n\n\ndef _sidebar(\n runs: list[RunInfo],\n current: RunInfo | None,\n total: int,\n matched: int,\n query: str,\n) -> str:\n current_name = current.name if current else \"\"\n body = sidebar_items(runs, current_name, current, query)\n foot = sidebar_foot(matched, len(runs))\n sig = sidebar_sig(body, foot, bool(current and current.live))\n return f\"\"\"<aside class=\"side\">\n <div class=\"side-head\">\n <div class=\"brand\"><span class=\"mark\">✳</span>CC Live<span class=\"ver\">本地回放</span></div>\n <form class=\"side-search\" method=\"get\" action=\"/\">\n <input type=\"search\" name=\"q\" value=\"{html.escape(query, quote=True)}\" placeholder=\"搜索会话\">\n </form>\n </div>\n <div class=\"side-list\" id=\"side-list\" data-sig=\"{sig}\" data-current=\"{html.escape(current_name, quote=True)}\" data-live=\"{1 if current and current.live else 0}\">{body}</div>\n <div class=\"side-foot\" id=\"side-foot\" data-sig=\"{html.escape(sig, quote=True)}\">{foot}</div>\n</aside>\"\"\"\n\n\ndef sidebar_url(query: str, status: str, limit: int, current_name: str) -> str:\n \"\"\"前端轮询的地址；与当前页面的搜索/筛选保持一致。\"\"\"\n params = {\"q\": query, \"status\": status, \"limit\": str(limit), \"current\": current_name}\n return \"/api/sidebar?\" + urllib.parse.urlencode(params)"
}结果
The file /Users/mengmeng/grok-cc-task/cc-live-monitor/views.py has been updated successfully. (file state is current in your context — no need to Read it back)
思考
Now page_chat: inject SIDEBAR_JS and always inject LIVE_JS when applicable. Also footer note.
Current code:
```python
else:
body, next_seq = _thread_parts(run, replay, task_text)
pager = _pager(run, replay)
scripts = f"<script>{CHAT_JS}</script>"
stats = ...
if replay.live:
url = ...
live_js = LIVE_JS.replace(...)
scripts += ...
foot = live-wait
```
New:
- compute `can_live = bool(run) and bool(replay.stream_files) and replay.flavor != "codex" and replay.page >= replay.pages and not replay.error`
Note: `replay.stream_files` only includes claude streams; codex-only runs have empty stream_files. Good.
- if can_live: bake url with stream (replay.stream_name or default). AUTO = 1 if replay.live else 0.
url needs `&since=` appended by JS? Currently JS builds `LIVE_URL + '&since=' + (maxSeq+1)`, and url includes `?stream=...`. Keep.
- foot when live: waiting note; when not live: unchanged.
Careful: if live is true but page isn't last page, replay.live is computed true and views shows the "跳到末页" note; live js not injected. Existing behavior — page_chat's `if replay.live` injected live JS even on early pages? Existing: `if replay.live:` injects regardless of page, plus the note. LIVE_JS hides pager and follows. Actually with page< pages, live was still injected — potentially weird. With my can_live requiring last page, better.
Hmm but replay.live in _thread_parts warns "实时追加只在最后一页可用" — if we don't inject, then this stays consistent.
Also `SINCE` = next_seq. When page loaded non-live and becomes live later, since = next_seq from render; fine.
Now sidebar JS always included (run None too):
```python
scripts = f"<script>{SIDEBAR_JS...}</script>"
```
Placeholder replacements: `__SIDEBAR_URL__`, `__POLL_MS__`. Use json.dumps for URL to be safe with quotes. URL contains percent-encoded chars, no quotes. Use json.dumps.
Footer note: append `<span class="foot-hint">…</span>` in all branches. Simplest: after computing foot in both branches, add note. But in the `run is None` branch too. Let's define `FOOT_NOTE = f'<span class="foot-hint">{html.escape(SIDEBAR_NOTE)}</span>'` and add to foot at the end (before the return) for both. Note the live-stat has margin-left auto; foot-hint after it would sit at right. Better place foot-hint right after the note span, before live-stat. Hmm, in the branches foot is assembled with live-note then live-stat. I'll insert the hint right after live-note: i.e., append right after assignment but the live-stat append happens later...
Simplest: in the return HTML, put the note as a separate element after `{foot}`? footer is flex; `{foot}<span class="foot-hint">…</span>` — that puts hint after live-stat, right-aligned. Might be okay but crowded on mobile. Alternatively add a `.foot-hint` with `margin-left:auto` and remove auto from live-stat? No.
Better: put the hint in the sidebar only (spec allows 页脚/侧栏底部 either) plus keep main footer clean. But on mobile the side-foot is hidden. Hmm. I'll put it in the footer too but as a separate line? The footer is a flex row; adding a `<span class="foot-hint">` with `margin-left: auto` conflicts.
Decision: sidebar bottom gets the note (visible desktop). Main footer: append after live-stat a muted short hint with class `foot-hint`, `order` doesn't matter. I'll style `.foot-hint { color: var(--dim); font-size: 11px; margin-left: 4px; }`. When live-stat has margin-left:auto, hint sits at far right. Acceptable? It's a small note at footer right. Hmm, "页脚加一行小字". Fine, but right next to stats may wrap on narrow. On mobile, `.foot` might wrap; set `flex-wrap: wrap`? Let me instead make the footer structure: `<span id="live-note">…</span><span id="live-stat">…</span>` then a block-level hint after? That would break flex row height.
Alternative clean approach: make `.foot` keep the status line and add a second line via CSS `flex-wrap: wrap` and `.foot-hint { flex-basis: 100%; }` giving it its own line. That's "页脚一行小字". Let's do that: `.foot { flex-wrap: wrap; }` and `.foot-hint { flex-basis: 100%; color: var(--dim); font-size: 11px; }`. Height grows by ~16px. OK.
Maybe simpler to only put in sidebar... The requirement: "页脚/侧栏底部加一行小字" — one of them is enough, but user explicitly said "并在页脚加一行说明" in root cause B. I'll do both (sidebar bottom + footer second line).
Implement.
改文件/Users/mengmeng/grok-cc-task/cc-live-monitor/views.py
参数
{
"replace_all": false,
"file_path": "/Users/mengmeng/grok-cc-task/cc-live-monitor/views.py",
"old_string": " if run is None:\n if query:\n body = (\n f'<div class=\"empty\">没有匹配「{html.escape(query)}」的会话'\n '<div class=\"sub\" style=\"margin-top:6px\"><a href=\"/\">看全部会话</a></div></div>'\n )\n else:\n body = (\n '<div class=\"empty\">runs 目录里还没有会话记录'\n f'<div class=\"sub\" style=\"margin-top:6px\">{html.escape(runs_dir)}</div></div>'\n )\n pager = \"\"\n scripts = \"\"\n foot = '<span id=\"live-note\" class=\"foot-note\">没有可回放的记录</span>'\n else:\n body, next_seq = _thread_parts(run, replay, task_text)\n pager = _pager(run, replay)\n scripts = f\"<script>{CHAT_JS}</script>\"\n\n stats = replay.timeline.stats if replay.timeline else {}\n if replay.live:\n url = _run_url(run, \"/live\") + \"?\" + urllib.parse.urlencode({\"stream\": replay.stream_name})\n live_js = (\n LIVE_JS.replace(\"__LIVE_URL__\", url)\n .replace(\"__SINCE__\", str(next_seq))\n )\n scripts += f\"<script>{live_js}</script>\"\n foot = '<span id=\"live-note\" class=\"foot-note live-wait\">正在连接实时流…</span>'\n elif replay.error:\n foot = f'<span id=\"live-note\" class=\"foot-note live-off\">{html.escape(replay.error)}</span>'\n elif replay.timeline is not None:\n foot = (\n '<span id=\"live-note\" class=\"foot-note\">'\n f\"源文件 {_num(stats.get('lines', 0))} 行\"\n f\" · 跳过流式增量 {_num(stats.get('skipped', 0))} 行\"\n f\" · 坏行 {_num(stats.get('bad', 0))}\"\n \"</span>\"\n )\n else:\n foot = '<span id=\"live-note\" class=\"foot-note\">没有可回放的记录</span>'\n\n if replay.timeline is not None:\n foot += (\n f'<span id=\"live-stat\" class=\"foot-stat\">共 {_num(replay.timeline.total)} 条事件'\n f\" · 解析 {stats.get('parse_ms', 0)} ms</span>\"\n )\n else:\n foot += '<span id=\"live-stat\" class=\"foot-stat\"></span>'\n\n return f\"\"\"<!doctype html>\n<html lang=\"zh-CN\"><head><meta charset=\"utf-8\">\n<meta name=\"viewport\" content=\"width=device-width, initial-scale=1\">\n<title>{html.escape(run_title(run)) if run else \"CC Live\"}</title><style>{CSS}</style></head>\n<body>\n<div class=\"shell\">\n{sidebar}\n <main class=\"main\">\n{top}\n <div class=\"scroller\" id=\"scroller\">\n {pager}\n <div class=\"thread\" id=\"chat\">\n {body}\n <div id=\"draft\"></div>\n <div id=\"chat-end\"></div>\n </div>\n </div>\n <footer class=\"foot\">{foot}</footer>\n <button id=\"jump-latest\" class=\"jump\" type=\"button\" hidden>↓ 跳到最新</button>\n </main>\n</div>\n{scripts}\n</body></html>\"\"\"",
… 已截断（仅显示前 4 KB）结果
The file /Users/mengmeng/grok-cc-task/cc-live-monitor/views.py has been updated successfully. (file state is current in your context — no need to Read it back)
思考
Need `import json` in views.py. Add it.
Also `views.sidebar_items` is used by server.
Also for detail page opened non-live: `replay.live` false; `foot` shows stats. Good.
Now, one issue: `can_live` when the page is live but the run has codex only — replay.stream_files empty, so no live. Existing behavior: SSE unsupported for codex anyway.
Add import json.
改文件/Users/mengmeng/grok-cc-task/cc-live-monitor/views.py
参数
{
"replace_all": false,
"file_path": "/Users/mengmeng/grok-cc-task/cc-live-monitor/views.py",
"old_string": "import hashlib\nimport html\nimport os",
"new_string": "import hashlib\nimport html\nimport json\nimport os"
}结果
The file /Users/mengmeng/grok-cc-task/cc-live-monitor/views.py has been updated successfully. (file state is current in your context — no need to Read it back)
思考
Now assets.py: add SIDEBAR_JS, rewrite LIVE_JS, add CSS for `.side-note`, `.foot-hint`, `.foot-wrap`.
LIVE_JS rewrite. Let me write carefully, preserving existing behaviors:
```js
LIVE_JS = """
(function () {
var LIVE_URL = "__LIVE_URL__";
var SINCE = __SINCE__;
var AUTO = __AUTO__;
var BOTTOM_PX = 110;
var PROGRAMMATIC_MS = 700;
var chat = document.getElementById('chat');
var scroller = document.getElementById('scroller');
var draftBox = document.getElementById('draft');
var note = document.getElementById('live-note');
var statEl = document.getElementById('live-stat');
var jumpBtn = document.getElementById('jump-latest');
var maxSeq = SINCE - 1;
var stopped = false;
var started = false;
var source = null;
var backoff = 1000;
var followOn = true;
var pending = 0;
var lastProgrammatic = 0;
var lastY = scroller ? scroller.scrollTop : 0;
...
```
Hide pagerbar only when starting live (not at load, since non-live page still needs pager). Actually existing hides at load. Move to start().
connect():
```js
function connect() {
if (stopped) return;
if (source) { try { source.close(); } catch (e) {} source = null; }
source = new EventSource(LIVE_URL + '&since=' + (maxSeq + 1));
source.addEventListener('open', ...)
...
source.addEventListener('closed', function (ev) {
stopped = true;
if (source) { source.close(); source = null; }
...
// mark incomplete wrappers
});
...
source.onerror = function () { if stopped return; close; source=null; ... setTimeout(connect, backoff) }
}
function start() {
started = true;
if (source) return; // 已经连着
if (stopped) { // 上一次结束过：清掉「不完整」气泡，接着连
stopped = false;
backoff = 1000;
Array.prototype.forEach.call(chat ? chat.querySelectorAll('.ev-incomplete') : [], function (w) {
if (w.parentNode) w.parentNode.removeChild(w);
});
renderDraft('');
}
noteStart();
connect();
}
```
Wait: `.ev` wrappers created in closed handler need class 'ev ev-incomplete'.
Top bar status update at start:
```js
function markRunning() {
var st = document.querySelector('.top-meta .st');
if (st) { st.className = 'st run'; st.innerHTML = '<span class="dot"></span>运行中'; }
}
```
Hide pagerbar at start:
```js
function hidePager() { ... display none ... }
```
Actually if page < pages, can_live false; so only called on last page→ safe.
Expose:
```js
window.__ccLive = { start: start, isOn: function(){ return !!source && !stopped; } };
if (AUTO) start();
```
Note: `setNote` function defined.
There's an issue with `updateJump` etc. remain same.
Now SIDEBAR_JS:
```js
SIDEBAR_JS = """
(function () {
var URL_BASE = __SIDEBAR_URL__;
var POLL_MS = __POLL_MS__;
var list = document.getElementById('side-list');
if (!list) return;
var foot = document.getElementById('side-foot');
var note = document.getElementById('live-note');
var sig = list.getAttribute('data-sig') || '';
var currentLive = list.getAttribute('data-live') === '1';
var busy = false;
function sidebarNote(text, cls) {
if (!note || note.classList.contains('live-off') === false && !cls) {}
}
```
Hmm the live note element may contain stats; don't stomp on it unnecessarily. Use a dedicated small element? For "已开始实时" the LIVE_JS itself sets the note on open ("实时跟随中"). So sidebar JS doesn't need to write notes; it just calls `__ccLive.start()`, and LIVE_JS will set the note. Good — avoids conflicts. But requirement says "提示「已开始实时」或自动连 SSE" — auto connect satisfies. I can additionally flash note; skip.
Sidebar JS:
```js
function apply(data) {
if (!data || data.sig === sig) return;
sig = data.sig;
var top = list.scrollTop;
list.innerHTML = data.items;
list.scrollTop = top;
if (foot && data.foot) foot.innerHTML = data.foot;
var cur = data.current || {};
var live = !!cur.live;
if (live !== currentLive) {
currentLive = live;
if (window.__ccLive) {
if (live) window.__ccLive.start();
}
}
}
```
Also handle live true but no __ccLive (codex-only or early page): no-op.
Poll loop:
```js
function tick() {
if (busy || document.hidden) return;
busy = true;
var ctl = window.AbortController ? new AbortController() : null;
var timer = setTimeout(function () { if (ctl) ctl.abort(); busy = false; }, 8000);
fetch(URL_BASE + '&_=' + Date.now(), {cache: 'no-store', signal: ctl ? ctl.signal : undefined})
.then(function (r) { return r.ok ? r.json() : null; })
.then(function (d) { clearTimeout(timer); busy = false; apply(d); })
.catch(function () { clearTimeout(timer); busy = false; });
}
setInterval(tick, POLL_MS);
setTimeout(tick, 800); // 打开页面后很快就对齐一次
```
Careful: if aborted, clearTimeout then busy=false in catch; but timer also sets busy=false. Fine, but double-clear. Keep timer variable cleared in both paths.
Also when tab becomes visible again → tick immediately:
```js
document.addEventListener('visibilitychange', function () { if (!document.hidden) tick(); });
```
One risk: replacing `.side-list` innerHTML every time sig changes, e.g. when any run's mtime changes? Items HTML includes `_when(mtime)` (minute granularity) and status; so stable mostly. The "运行中" pulse animation restarts on replace — acceptable.
But `data-sig` attribute isn't updated on list element; JS uses local sig var. Fine.
Also should update top-bar status when live flips false? SSE handles closed. Skip.
Now CSS additions:
```css
.side-note { margin-top: 6px; line-height: 1.45; color: #6b665e; font-size: 11px; }
.foot-hint { flex-basis: 100%; color: var(--dim); font-size: 11px; }
.foot { flex-wrap: wrap; }
```
`.side-foot` padding 9px 16px; adding note increases height. Fine.
Also for mobile, `.side-foot { display:none }` — footer hint still visible.
Let me now write assets changes.
C
现在改前端脚本（assets.py）：新增侧栏轮询、把 LIVE_JS 改成可随时启动。
改文件/Users/mengmeng/grok-cc-task/cc-live-monitor/assets.py
参数
{
"replace_all": false,
"file_path": "/Users/mengmeng/grok-cc-task/cc-live-monitor/assets.py",
"old_string": ".side-foot { border-top: 1px solid var(--line-soft); padding: 9px 16px; color: var(--dim); font-size: 11.5px; }",
"new_string": ".side-foot { border-top: 1px solid var(--line-soft); padding: 9px 16px; color: var(--dim); font-size: 11.5px; }\n.side-note { margin-top: 6px; line-height: 1.45; color: #6b665e; font-size: 11px; }"
}结果
The file /Users/mengmeng/grok-cc-task/cc-live-monitor/assets.py has been updated successfully. (file state is current in your context — no need to Read it back)
改文件/Users/mengmeng/grok-cc-task/cc-live-monitor/assets.py
参数
{
"replace_all": false,
"file_path": "/Users/mengmeng/grok-cc-task/cc-live-monitor/assets.py",
"old_string": ".foot {\n border-top: 1px solid var(--line-soft); padding: 7px 24px; display: flex; gap: 14px;\n align-items: center; color: var(--dim); font-size: 11.5px; background: var(--bg);\n}",
"new_string": ".foot {\n border-top: 1px solid var(--line-soft); padding: 7px 24px; display: flex; gap: 14px;\n align-items: center; color: var(--dim); font-size: 11.5px; background: var(--bg);\n flex-wrap: wrap;\n}\n.foot-hint { flex-basis: 100%; color: var(--dim); font-size: 11px; line-height: 1.3; }"
}结果
The file /Users/mengmeng/grok-cc-task/cc-live-monitor/assets.py has been updated successfully. (file state is current in your context — no need to Read it back)
思考
Now rewrite LIVE_JS and add SIDEBAR_JS. I'll replace the whole LIVE_JS block (lines from `LIVE_JS = """` to end of file).
Let me write the new content carefully, preserving all existing behaviors.
I'll append SIDEBAR_JS before LIVE_JS or after. Order in file doesn't matter; views imports both.
Write new LIVE_JS.
改文件/Users/mengmeng/grok-cc-task/cc-live-monitor/assets.py
参数
{
"replace_all": false,
"file_path": "/Users/mengmeng/grok-cc-task/cc-live-monitor/assets.py",
"old_string": "LIVE_JS = \"\"\"\n(function () {\n var LIVE_URL = \"__LIVE_URL__\";\n var SINCE = __SINCE__;\n var BOTTOM_PX = 110; // 距离底部多少像素内算「在底部」\n var PROGRAMMATIC_MS = 700; // 程序滚动后多久内忽略 scroll 事件\n\n var chat = document.getElementById('chat');\n var scroller = document.getElementById('scroller');\n var draftBox = document.getElementById('draft');\n var note = document.getElementById('live-note');\n var statEl = document.getElementById('live-stat');\n var jumpBtn = document.getElementById('jump-latest');\n\n var maxSeq = SINCE - 1;\n var stopped = false;\n var backoff = 1000;\n var source = null;\n var followOn = true;\n var pending = 0;\n var lastProgrammatic = 0;\n var lastY = scroller ? scroller.scrollTop : 0;\n\n Array.prototype.forEach.call(document.querySelectorAll('.pagerbar'), function (p) {\n p.style.display = 'none';\n });\n\n function setNote(text, cls) {\n if (!note) return;\n note.textContent = text;\n note.className = 'foot-note ' + (cls || '');\n }\n function atBottom() {\n if (!scroller) return true;\n return scroller.scrollHeight - scroller.scrollTop - scroller.clientHeight <= BOTTOM_PX;\n }\n function updateJump() {\n if (!jumpBtn) return;\n jumpBtn.hidden = followOn;\n jumpBtn.textContent = pending > 0\n ? '↓ 跳到最新（' + pending + ' 条新内容）'\n : '↓ 跳到最新';\n }\n function scrollToLatest(smooth) {\n if (!scroller) return;\n lastProgrammatic = Date.now();\n scroller.scrollTo({\n top: scroller.scrollHeight,\n behavior: smooth === false ? 'auto' : 'smooth'\n });\n }\n function setFollow(on) {\n followOn = on;\n if (on) {\n pending = 0;\n scrollToLatest();\n }\n updateJump();\n }\n function follow() {\n if (followOn) { scrollToLatest(); return; }\n pending += 1;\n updateJump();\n }\n\n if (jumpBtn) jumpBtn.addEventListener('click', function () { setFollow(true); });\n\n // 用户往上滚 → 暂停跟随；滚回底部 → 自动恢复\n if (scroller) scroller.addEventListener('scroll', function () {\n var y = scroller.scrollTop;\n var goingUp = y < lastY - 2;\n lastY = y;\n if (stopped || Date.now() - lastProgrammatic < PROGRAMMATIC_MS) return;\n var bottom = atBottom();\n if (!bottom && goingUp && followOn) {\n setFollow(false);\n } else if (bottom && !followOn) {\n setFollow(true);\n }\n }, { passive: true });\n updateJump();\n\n function clearPlaceholder() {\n var ph = chat && chat.querySelector('.empty');\n if (ph) ph.parentNode.removeChild(ph);\n }\n function regroup() {\n if (window.__ccChat) window.__ccChat.rebuild();\n }\n function appendEvent(seq, html) {\n if (!chat || seq <= maxSeq || !html) return;\n clearPlaceholder();\n var wrap = document.createElement('div');\n wrap.className = 'ev';\n wrap.setAttribute('data-seq', String(seq));\n wrap.innerHTML = html;\n chat.insertBefore(wrap, draftBox || null);\n maxSeq = seq;\n regroup();\n }\n function updateEvent(seq, html) {\n var el = chat && chat.querySelector('[data-seq=\"' + seq + '\"]');\n if (!el || !html) return;\n var opened = [];\n Array.prototype.forEach.call(el.querySelectorAll('details'), function (d) { opened.push(d.open); });\n el.innerHTML = html;\n Array.prototype.forEach.call(el.querySelectorAll('details'), function (d, i) {\n if (opened[i]) d.open = true;\n });\n regroup();\n }\n function renderDraft(html) {\n if (!draftBox || draftBox.innerHTML === html) return;\n draftBox.innerHTML = html;\n }\n function connect() {\n if (stopped) return;\n source = new EventSource(LIVE_URL + '&since=' + (maxSeq + 1));\n source.addEventListener('open', function () {\n backoff = 1000;\n setNote('实时跟随中', 'live-on');\n });\n source.addEventListener('append', function (ev) {\n var data = JSON.parse(ev.data || '{}');\n (data.events || []).forEach(function (item) { appendEvent(item.seq, item.html); });\n
… 已截断（仅显示前 4 KB）结果
The file /Users/mengmeng/grok-cc-task/cc-live-monitor/assets.py has been updated successfully. (file state is current in your context — no need to Read it back)
思考
Now server.py: add `/api/sidebar` route and handler. Also `/_api` no. Route parse: parts[0] == "api". Insert before `if parts[0] != "run"`.
Handler:
```python
def _api_sidebar(self, query: dict[str, list[str]]) -> None:
limit = self._query_int(query, "limit", DEFAULT_LIMIT)
status = (query.get("status") or ["all"])[0]
if status not in rd.STATUS_FILTERS:
status = "all"
keyword = (query.get("q") or [""])[0].strip()[:120]
current_name = (query.get("current") or [""])[0].strip()
runs, total, counts, matched = rd.scan_runs(self.runs_dir, limit=limit, status=status, query=keyword)
runs.sort(key=lambda r: r.mtime, reverse=True)
current_run = rd.find_run(current_name, self.runs_dir) if current_name else None
items = views.sidebar_items(runs, current_name, current_run, keyword)
foot = views.sidebar_foot(matched, len(runs))
live = bool(current_run and current_run.live)
payload = {
"sig": views.sidebar_sig(items, foot, live),
"items": items,
"foot": foot,
"total": total,
"counts": counts,
"current": {
"name": current_name,
"live": live,
"status": current_run.status if current_run else "",
"severity": current_run.severity if current_run else "",
},
}
self._send(HTTPStatus.OK, json.dumps(payload, ensure_ascii=False),
"application/json; charset=utf-8")
```
Note `_send` sets Cache-Control no-store already. Good.
Wrap exceptions? `_route` catches.
Also `find_run` on every poll does a build_run scan for current run (cheap).
Route insertion.
改文件/Users/mengmeng/grok-cc-task/cc-live-monitor/server.py
参数
{
"replace_all": false,
"file_path": "/Users/mengmeng/grok-cc-task/cc-live-monitor/server.py",
"old_string": " if not parts:\n return self._page_list(query)\n if parts[0] == \"healthz\":\n return self._send(HTTPStatus.OK, \"ok\\n\", \"text/plain; charset=utf-8\")\n if parts[0] != \"run\" or len(parts) < 2:\n return self._error(HTTPStatus.NOT_FOUND, \"页面不存在\")",
"new_string": " if not parts:\n return self._page_list(query)\n if parts[0] == \"healthz\":\n return self._send(HTTPStatus.OK, \"ok\\n\", \"text/plain; charset=utf-8\")\n if parts[0] == \"api\" and len(parts) == 2 and parts[1] == \"sidebar\":\n return self._api_sidebar(query)\n if parts[0] != \"run\" or len(parts) < 2:\n return self._error(HTTPStatus.NOT_FOUND, \"页面不存在\")"
}结果
The file /Users/mengmeng/grok-cc-task/cc-live-monitor/server.py has been updated successfully. (file state is current in your context — no need to Read it back)
改文件/Users/mengmeng/grok-cc-task/cc-live-monitor/server.py
参数
{
"replace_all": false,
"file_path": "/Users/mengmeng/grok-cc-task/cc-live-monitor/server.py",
"old_string": " def _page_file(self, run: rd.RunInfo, filename: str) -> None:",
"new_string": " # ---------- 侧栏增量 ----------\n\n def _api_sidebar(self, query: dict[str, list[str]]) -> None:\n \"\"\"侧栏轮询接口：返回条目 HTML 片段 + 当前会话的 live 状态。\"\"\"\n limit = self._query_int(query, \"limit\", DEFAULT_LIMIT)\n status = (query.get(\"status\") or [\"all\"])[0]\n if status not in rd.STATUS_FILTERS:\n status = \"all\"\n keyword = (query.get(\"q\") or [\"\"])[0].strip()[:120]\n current_name = (query.get(\"current\") or [\"\"])[0].strip()\n\n runs, total, counts, matched = rd.scan_runs(\n self.runs_dir, limit=limit, status=status, query=keyword\n )\n runs.sort(key=lambda r: r.mtime, reverse=True)\n current_run = rd.find_run(current_name, self.runs_dir) if current_name else None\n\n items = views.sidebar_items(runs, current_name, current_run, keyword)\n foot = views.sidebar_foot(matched, len(runs))\n live = bool(current_run and current_run.live)\n payload = {\n \"sig\": views.sidebar_sig(items, foot, live),\n \"items\": items,\n \"foot\": foot,\n \"total\": total,\n \"counts\": counts,\n \"current\": {\n \"name\": current_name,\n \"live\": live,\n \"status\": current_run.status if current_run else \"\",\n \"severity\": current_run.severity if current_run else \"\",\n },\n }\n self._send(\n HTTPStatus.OK,\n json.dumps(payload, ensure_ascii=False),\n \"application/json; charset=utf-8\",\n )\n\n def _page_file(self, run: rd.RunInfo, filename: str) -> None:"
}结果
The file /Users/mengmeng/grok-cc-task/cc-live-monitor/server.py has been updated successfully. (file state is current in your context — no need to Read it back)
思考
Now check stream_parse for how live SSE works with a file — to write a live test. Also consider `_build_replay` uses `incomplete_tail=not run.live` — fine.
One issue: SSE loop ends when `current.live` false. With fallback, after 90s of no writes it ends. Fine.
Another: for the detail page that's non-live, we inject LIVE_JS with AUTO=0. But `SINCE` is baked. When sidebar triggers start(), connect with since=maxSeq+1 where maxSeq=SINCE-1 → since = SINCE. Good.
But careful: `LIVE_JS` and `SIDEBAR_JS` order — sidebar script is included before `{scripts}`. `setTimeout(tick, 800)` so `window.__ccLive` will exist by then. Good.
Now, potential problem: the detail page's sidebar poll calls `start()` when live flips true, but for a page whose run is already live at load, AUTO=1 already started. Fine.
Another consideration: `views.page_chat` is also used for the list page with `run` = latest run. Fine.
Now selftest fixture updates. Add:
```python
# 12) 锁没了但 stream 还在长 → 兜底判运行中
fallback = os.path.join(runs_dir, "20261025-900012-fallback-live")
w(...task...)
w(runner.log, "[09:12:00] attempt 1 model=m7\n")
jsonl(stream.jsonl, [...])
# mtime 是刚写的，自然在 90 秒内
# 13) stream 十分钟没动，也没结束行 → 不该算运行中
idle = ... "20261025-900013-idle-unfinished"
write log + stream, then os.utime(stream, old) with old = now - 600
```
Note `_newest_record_age` uses file mtimes from scandir. Setting utime on the stream file.
But careful: fixture #12's runner.log has no done → state UNFINISHED, stream fresh → live. Counts: running 2 (lock run + fallback), total 12, failed 2, success 4.
Wait, does `is_placeholder` filter out any? No.
Also the stale fixture #10 has no stream, remains 已中断.
Check `check(total == 10 ...)` update to 12, running 2.
Add assertions:
```python
fb = by_run["20261025-900012-fallback-live"]
check(fb.live and fb.status == "运行中" and fb.severity == "run", "锁没了但 stream 刚更新过 → 运行中（兜底）")
idle_run = by_run["20261025-900013-idle-unfinished"]
check(not idle_run.live and idle_run.status == "未结束", "stream 十分钟没动 → 不算运行中")
```
Careful: idle run's dir mtime = now, so idle < 1h → status_detail "日志无结束行，可能仍在运行" but status remains 未结束. Good.
Hmm, wait: idle run stream 10 min old; file mtime set with utime. Good.
Also test that a run with `done rc=0` but fresh stream isn't live: the success fixture has done rc=0 and stream just written → state SUCCESS → excluded. Add assertion: `check(not okc.live, "结束了的 run 不因文件新鲜被当成运行中")`. Good.
Also sidebar API integration test: spin up server thread.
```python
print("[7] 侧栏增量接口 / 前端脚本")
check("side-list" in sidebar_html and "data-sig" in sidebar_html, ...)
check(views.SIDEBAR_NOTE in sidebar_html, "页脚说明")
```
Wait sidebar_html was generated before? It's generated in section [5] with runs. It includes note. Also LIVE_JS presence.
Integration:
```python
import http.server, threading, urllib.request, json as _json
import server as srv
handler_cls = type("TestHandler", (srv.Handler,), {"runs_dir": runs_dir})
httpd = srv.Server(("127.0.0.1", 0), handler_cls)
port = httpd.server_address[1]
t = threading.Thread(target=httpd.serve_forever, daemon=True)
t.start()
try:
with urllib.request.urlopen(f"http://127.0.0.1:{port}/api/sidebar?current=20261025-900012-fallback-live", timeout=10) as resp:
data = _json.load(resp)
check(data["current"]["live"] is True, "API 报告当前会话在运行")
check("运行中" in data["items"], "侧栏片段含运行中")
check(data["sig"] and data["foot"], "返回 sig 与页脚")
finally:
httpd.shutdown(); httpd.server_close()
```
`rd.LOCK_DIR` is module-global and set to fixture lock dir already, and server module imports rd so same module. Good.
Careful: `srv.Handler` class variable `runs_dir` default; subclass override works since `_route` uses `self.runs_dir`.
Port 0 allowed.
Now also test the whole page includes `<script>` sidebar JS with baked URL. e.g. check `"/api/sidebar?"` in ok_html and `"__SIDEBAR_URL__" not in ok_html`.
Let's apply selftest edits.
C
现在补自测 fixture 与断言：
改文件/Users/mengmeng/grok-cc-task/cc-live-monitor/selftest.py
参数
{
"replace_all": false,
"file_path": "/Users/mengmeng/grok-cc-task/cc-live-monitor/selftest.py",
"old_string": " # 11) 排队等锁\n queued = os.path.join(runs_dir, \"20261025-900011-queued-demo\")\n w(os.path.join(queued, \"task.txt\"), \"目标：排队中的任务\\n\")\n w(os.path.join(queued, \"runner.log\"), \"[09:11:00] waiting for lock\\n\")\n\n return runs_dir, lock_dir",
"new_string": " # 11) 排队等锁\n queued = os.path.join(runs_dir, \"20261025-900011-queued-demo\")\n w(os.path.join(queued, \"task.txt\"), \"目标：排队中的任务\\n\")\n w(os.path.join(queued, \"runner.log\"), \"[09:11:00] waiting for lock\\n\")\n\n # 12) 锁被清掉 / 不是 run.sh 起的：stream 刚写过 → 兜底算运行中\n fallback = os.path.join(runs_dir, \"20261025-900012-fallback-live\")\n w(os.path.join(fallback, \"task.txt\"), \"目标：没有锁也在跑\\n\")\n w(os.path.join(fallback, \"runner.log\"), \"[09:12:00] attempt 1 model=m7 effort=medium\\n\")\n jsonl(os.path.join(fallback, \"stream.jsonl\"), [\n {\"type\": \"system\", \"subtype\": \"init\", \"model\": \"m7\", \"session_id\": \"s-fb\"},\n {\"type\": \"assistant\", \"message\": {\"content\": [{\"type\": \"text\", \"text\": \"我正在写东西\"}]}},\n ])\n\n # 13) 同样没有结束行，但 stream 十分钟没动 → 不该算运行中\n quiet = os.path.join(runs_dir, \"20261025-900013-quiet-unfinished\")\n w(os.path.join(quiet, \"task.txt\"), \"目标：写完就没声了\\n\")\n w(os.path.join(quiet, \"runner.log\"), \"[09:13:00] attempt 1 model=m8\\n\")\n quiet_stream = os.path.join(quiet, \"stream.jsonl\")\n jsonl(quiet_stream, [\n {\"type\": \"assistant\", \"message\": {\"content\": [{\"type\": \"text\", \"text\": \"先这样\"}]}},\n ])\n quiet_old = time.time() - 600\n os.utime(quiet_stream, (quiet_old, quiet_old))\n\n return runs_dir, lock_dir"
}结果
The file /Users/mengmeng/grok-cc-task/cc-live-monitor/selftest.py has been updated successfully. (file state is current in your context — no need to Read it back)
改文件/Users/mengmeng/grok-cc-task/cc-live-monitor/selftest.py
参数
{
"replace_all": false,
"file_path": "/Users/mengmeng/grok-cc-task/cc-live-monitor/selftest.py",
"old_string": " check(total == 10 and counts[\"running\"] == 1 and counts[\"failed\"] == 2, \"总数、运行中、失败计数\")",
"new_string": " check(total == 12 and counts[\"running\"] == 2 and counts[\"failed\"] == 2, \"总数、运行中、失败计数\")"
}结果
The file /Users/mengmeng/grok-cc-task/cc-live-monitor/selftest.py has been updated successfully. (file state is current in your context — no need to Read it back)
思考
Careful: "运行中置顶" assertion `names[0].endswith("live-demo")` — now two running runs sorted by mtime desc among PIN_ORDER 0. Both live-demo and fallback-live have mtime = now (dir mtime when created). Which is newer? fallback created later → names[0] could be fallback-live. Fix that assertion: check first two are the running ones.
Let me update:
```python
check(set(names[:2]) == {"20261025-900001-live-demo", "20261025-900012-fallback-live"}, "运行中置顶")
```
Also status success count still 4? success runs: success-demo, codex-demo, codex-odd, plain-jsonl = 4. Yes (truncated & failed are failed). Failed 2. Good.
Now add assertions in [5] for fallback and quiet. And the sidebar API test.
改文件/Users/mengmeng/grok-cc-task/cc-live-monitor/selftest.py
参数
{
"replace_all": false,
"file_path": "/Users/mengmeng/grok-cc-task/cc-live-monitor/selftest.py",
"old_string": " check(names[0].endswith(\"live-demo\"), \"运行中置顶\")",
"new_string": " check(set(names[:2]) == {\"20261025-900001-live-demo\", \"20261025-900012-fallback-live\"},\n \"运行中置顶\")"
}结果
The file /Users/mengmeng/grok-cc-task/cc-live-monitor/selftest.py has been updated successfully. (file state is current in your context — no need to Read it back)
改文件/Users/mengmeng/grok-cc-task/cc-live-monitor/selftest.py
参数
{
"replace_all": false,
"file_path": "/Users/mengmeng/grok-cc-task/cc-live-monitor/selftest.py",
"old_string": " queued_run = by_run[\"20261025-900011-queued-demo\"]\n check(queued_run.status == \"排队中\", \"排队等锁 → 排队中\")",
"new_string": " queued_run = by_run[\"20261025-900011-queued-demo\"]\n check(queued_run.status == \"排队中\", \"排队等锁 → 排队中\")\n fallback_run = by_run[\"20261025-900012-fallback-live\"]\n check(fallback_run.live and fallback_run.status == \"运行中\" and fallback_run.severity == \"run\"\n and fallback_run.category == \"running\", \"锁没了但 stream 刚更新过 → 兜底判运行中\")\n quiet_run = by_run[\"20261025-900013-quiet-unfinished\"]\n check(not quiet_run.live and quiet_run.status == \"未结束\", \"stream 十分钟没动 → 不算运行中\")\n check(not okc.live, \"已结束的 run 不因文件新鲜被当成运行中\")"
}结果
The file /Users/mengmeng/grok-cc-task/cc-live-monitor/selftest.py has been updated successfully. (file state is current in your context — no need to Read it back)
思考
Now add section [7] sidebar API integration before the final PASS block. Let me insert after section [6] block, right before `print("\nPASS ...")`.
Need imports: http.server? Use `server as srv`, urllib.request, threading, json already imported as json.
Also caution: importing `server` module at top could conflict? Import inside main is fine.
Test details: fixture lock dir contains pid=current process and name "live-demo". find_run for current works.
Also assert the HTML page contains the polling script and the footer note, and the LIVE_JS is present with AUTO=0 for the non-live quiet run, and AUTO=1 for fallback run.
For the quiet run page: `_replay_for` builds Replay with live=False default. Fine.
Also check sidebar items function on `views.sidebar_items(runs, ...)`.
Write:
```python
print("[7] 侧栏增量刷新 / 兜底实时")
check(views.SIDEBAR_NOTE in sidebar_html, "侧栏底部有「只显示 runs」小字说明")
check('id="side-list"' in sidebar_html and 'data-sig=' in sidebar_html, "侧栏列表带轮询标记")
check("/api/sidebar?" in sidebar_html and "__SIDEBAR_URL__" not in sidebar_html, "侧栏脚本注入了轮询地址")
check("已开始实时" in views.LIVE_JS and "__AUTO__" not in ok_html, "SSE 脚本可在发现变 live 后就地启动")
```
Wait ok_html is non-live run (success) — LIVE_JS is injected with AUTO=0. `__AUTO__` replaced. Check `"__AUTO__" not in ok_html` and `"new EventSource" in ok_html`.
Does ok_html contain LIVE_JS? replay page 1 = pages 1, stream_files non-empty, flavor claude → can_live true → yes.
Integration API test with server.
Also test that the live run's page auto-starts: generate page for fallback_run with a replay that has live=True. Simpler: check `views.page_chat(..., run=fallback_run, replay=Replay(live=True, stream_files=["stream.jsonl"], ...))` contains `if (AUTO) start();` and `var AUTO = 1;`. Let's assert on the string "var AUTO = 1;".
I need a Replay with timeline for fallback to avoid errors. Use `_replay_for` then set `.live = True` via dataclasses.replace. Let's do:
```python
fb_tl = sp.load_timeline(os.path.join(fallback_run.path, "stream.jsonl"))
fb_replay = _replay_for(fallback_run, fb_tl)
fb_replay.live = True
fb_html = views.page_chat(runs, total, runs_dir, 60, ..., run=fallback_run, replay=fb_replay, task_text="目标：没有锁也在跑\n")
check("var AUTO = 1;" in fb_html and "已开始实时" in fb_html, "运行中页面自动挂 SSE")
```
`_replay_for` sets stream_name = files[0]. Good.
API test code:
```python
import threading
import urllib.request
import server as srv
handler = type("FixtureHandler", (srv.Handler,), {"runs_dir": runs_dir})
httpd = srv.Server(("127.0.0.1", 0), handler)
thread = threading.Thread(target=httpd.serve_forever, daemon=True)
thread.start()
try:
base = f"http://127.0.0.1:{httpd.server_address[1]}"
with urllib.request.urlopen(
base + "/api/sidebar?current=20261025-900012-fallback-live&limit=60", timeout=10
) as resp:
check(resp.headers.get("Content-Type", "").startswith("application/json"), "接口返回 JSON")
payload = json.loads(resp.read().decode("utf-8"))
check(payload["current"]["live"] is True and payload["current"]["status"] == "运行中",
"接口报告当前会话运行中")
check("运行中" in payload["items"] and payload["sig"] and payload["foot"],
"侧栏片段 / sig / 页脚都在")
with urllib.request.urlopen(base + "/healthz", timeout=10) as resp:
check(resp.read().strip() == b"ok", "healthz 正常")
finally:
httpd.shutdown()
httpd.server_close()
```
Note: srv.Server is ThreadingHTTPServer with daemon_threads. shutdown() works from main thread.
Careful: `Handler.runs_dir` is a class attr on srv.Handler; subclass with dict works.
`_send` uses self.command; fine.
Potential issue: responses are logged to stderr — noisy in test output. Override log_message in the fixture handler? `type("FixtureHandler", (srv.Handler,), {"runs_dir": runs_dir, "log_message": lambda *a, **k: None})`. Yes, quiet.
Now write.
改文件/Users/mengmeng/grok-cc-task/cc-live-monitor/selftest.py
参数
{
"replace_all": false,
"file_path": "/Users/mengmeng/grok-cc-task/cc-live-monitor/selftest.py",
"old_string": " print(\"\\nPASS — Phase 6 自测全部通过\")",
"new_string": " print(\"[7] 侧栏自动刷新 / 兜底实时\")\n check(views.SIDEBAR_NOTE in sidebar_html, \"侧栏底部有「只显示 runs」小字说明\")\n check('id=\"side-list\"' in sidebar_html and \"data-sig=\" in sidebar_html, \"侧栏列表带轮询标记\")\n check(\"/api/sidebar?\" in ok_html and \"__SIDEBAR_URL__\" not in ok_html, \"页面注入侧栏轮询地址\")\n check(\"new EventSource\" in ok_html and \"var AUTO = 0;\" in ok_html,\n \"未在跑的会话先备好 SSE 脚本、不自动连\")\n check(\"已开始实时\" in views.LIVE_JS and \"window.__ccLive\" in views.LIVE_JS,\n \"SSE 可在发现变 live 后就地启动\")\n\n fb_tl = sp.load_timeline(os.path.join(fallback_run.path, \"stream.jsonl\"))\n fb_replay = _replay_for(fallback_run, fb_tl)\n fb_replay.live = True\n fb_html = views.page_chat(\n runs, total, runs_dir, 60, query=\"\", counts=counts, matched=matched,\n run=fallback_run, task_text=\"目标：没有锁也在跑\\n\", replay=fb_replay,\n )\n check(\"var AUTO = 1;\" in fb_html and 'data-live=\"1\"' in fb_html, \"运行中页面自动挂 SSE\")\n\n import threading\n import urllib.request\n\n import server as srv\n\n quiet_srv = type(\"FixtureHandler\", (srv.Handler,), {\n \"runs_dir\": runs_dir,\n \"log_message\": lambda *a, **k: None,\n })\n httpd = srv.Server((\"127.0.0.1\", 0), quiet_srv)\n threading.Thread(target=httpd.serve_forever, daemon=True).start()\n try:\n base = f\"http://127.0.0.1:{httpd.server_address[1]}\"\n with urllib.request.urlopen(\n base + \"/api/sidebar?current=20261025-900012-fallback-live&limit=60\", timeout=10\n ) as resp:\n check(resp.headers.get(\"Content-Type\", \"\").startswith(\"application/json\"), \"接口返回 JSON\")\n payload = json.loads(resp.read().decode(\"utf-8\"))\n check(payload[\"current\"][\"live\"] is True and payload[\"current\"][\"status\"] == \"运行中\",\n \"接口报告当前会话运行中\")\n check(\"运行中\" in payload[\"items\"] and payload[\"sig\"] and payload[\"foot\"],\n \"侧栏片段 / sig / 页脚都在\")\n check(\"side-list\" not in payload[\"items\"], \"接口只回条目片段，不重复外壳\")\n with urllib.request.urlopen(base + \"/healthz\", timeout=10) as resp:\n check(resp.read().strip() == b\"ok\", \"healthz 正常\")\n finally:\n httpd.shutdown()\n httpd.server_close()\n\n print(\"\\nPASS — Phase 7 自测全部通过\")"
}结果
The file /Users/mengmeng/grok-cc-task/cc-live-monitor/selftest.py has been updated successfully. (file state is current in your context — no need to Read it back)
思考
Note `sidebar_html` was constructed in section [5] earlier, before fallback? It's built from `runs` which includes all fixtures. It includes SIDEBAR_NOTE. OK.
But `sidebar_html` variable is created in section [5] — yes, `sidebar_html = views.page_chat(...)`. Good.
Run selftest.
终端cd ~/grok-cc-task/cc-live-monitor && python3 selftest.py 2>&1 | tail -50
参数
{
"command": "cd ~/grok-cc-task/cc-live-monitor && python3 selftest.py 2>&1 | tail -50",
"description": "跑自测"
}结果
fixture: /var/folders/zc/8j16fp593pj6_2xzy1snx1340000gn/T/cclm-p4-y3a7_c60
[1] 列表：筛选 / 搜索 / 置顶
ok 总数、运行中、失败计数
ok 没有 runner.log 也没有 jsonl 的工件目录不出现在列表
ok 运行中置顶
Traceback (most recent call last):
File "/Users/mengmeng/grok-cc-task/cc-live-monitor/selftest.py", line 421, in <module>
raise SystemExit(main())
~~~~^^
File "/Users/mengmeng/grok-cc-task/cc-live-monitor/selftest.py", line 194, in main
check({names[1], names[2]} == {"20261025-900003-failed-demo", "20261025-900004-truncated-demo"},
~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
"失败紧随其后置顶")
^^^^^^^^^^^^^^^^^^^
File "/Users/mengmeng/grok-cc-task/cc-live-monitor/selftest.py", line 174, in check
raise AssertionError(label)
AssertionError: 失败紧随其后置顶思考
Because two running now occupy positions 0-1, failed at 2-3. Update assertion to names[2:4].
改文件/Users/mengmeng/grok-cc-task/cc-live-monitor/selftest.py
参数
{
"replace_all": false,
"file_path": "/Users/mengmeng/grok-cc-task/cc-live-monitor/selftest.py",
"old_string": " check({names[1], names[2]} == {\"20261025-900003-failed-demo\", \"20261025-900004-truncated-demo\"},\n \"失败紧随其后置顶\")",
"new_string": " check({names[2], names[3]} == {\"20261025-900003-failed-demo\", \"20261025-900004-truncated-demo\"},\n \"失败紧随其后置顶\")"
}结果
The file /Users/mengmeng/grok-cc-task/cc-live-monitor/selftest.py has been updated successfully. (file state is current in your context — no need to Read it back)
终端cd ~/grok-cc-task/cc-live-monitor && python3 selftest.py 2>&1 | tail -50
参数
{
"command": "cd ~/grok-cc-task/cc-live-monitor && python3 selftest.py 2>&1 | tail -50",
"description": "再跑自测"
}结果
ok 前端把连续工具调用合并成一行 ok 行内 Markdown ok Codex 记录也能当对话回放 ok 详情页显示不完整气泡 ok SSE 结束时草稿可转气泡 ok 空数据时也有完整外壳 [5] 状态文案人话化 / 圆点分级 ok 成功保持原样 ok 运行中保持原样 ok 失败（rc=3）→ 未完成 + 红点 ok rc 收进详情，不占状态文案 ok 出口检查失败 → 出口未过 + 暖黄，不算红点失败 ok 未结束超 2 小时 → 已中断 + 暖黄 ok 排队等锁 → 排队中 ok 锁没了但 stream 刚更新过 → 兜底判运行中 ok stream 十分钟没动 → 不算运行中 ok 已结束的 run 不因文件新鲜被当成运行中 ok 页面里不再出现原始失败文案 ok 出口未过 / 已中断用 warn 圆点 ok 顶栏与侧栏的配色映射一致 [6] 工具名映射 / 错误摘要 / 结果截断 ok Bash → 终端 ok 读写改找搜 五件套 ok ToolSearch → 找工具 ok mcp__lcu__* / browser / js → 浏览器 ok 未知 MCP 工具去掉 mcp__ 前缀 ok 普通工具保留原名 ok 出错摘要行不含 Traceback ok 出错摘要取第一条有效信息 ok 出错时摘要一行短句 ok 超长结果截断到约 4KB 并注明 ok 展开标题用人话名，原名留在 title ok 短结果不加截断提示 ok incomplete 气泡里的思考默认折叠 ok 页面里没有默认展开的思考块 ok 流式草稿的思考也默认折叠 [7] 侧栏自动刷新 / 兜底实时 ok 侧栏底部有「只显示 runs」小字说明 ok 侧栏列表带轮询标记 ok 页面注入侧栏轮询地址 ok 未在跑的会话先备好 SSE 脚本、不自动连 ok SSE 可在发现变 live 后就地启动 ok 运行中页面自动挂 SSE ok 接口返回 JSON ok 接口报告当前会话运行中 ok 侧栏片段 / sig / 页脚都在 ok 接口只回条目片段，不重复外壳 ok healthz 正常 PASS — Phase 7 自测全部通过
思考
All tests pass. Now restart the server on 8787 and do the real end-to-end test with a fake run dir.
Steps:
1. kill old python listening 8787 (`lsof -ti tcp:8787 -sTCP:LISTEN | xargs kill`).
2. start: `nohup python3 server.py >> server.log 2>&1 &` (README says nohup).
3. Create fake run dir `~/grok-cc-task/runs/20261025-235900-phas7-fake` with task.txt, runner.log (attempt, no done), and stream.1.jsonl appended over time.
4. curl `/api/sidebar?current=...` → expect live true, "运行中".
5. Connect to SSE `/run/<name>/live?stream=stream.1.jsonl&since=0` after appending new lines → check we get append/draft events.
6. Delete fake dir.
Note the instructions say the monitor is read-only for runs; creating a temporary fake directory is instructed by the task (self-test), then delete it.
Careful not to disturb the actual running task dir. Name it clearly fake.
Kill only LISTEN pid.
C
自测全过。重启 8787 服务：
终端cd ~/grok-cc-task/cc-live-monitor && lsof -ti tcp:8787 -sTCP:LISTEN | xargs -r kill && sleep 1 && (nohup python3 server…
参数
{
"command": "cd ~/grok-cc-task/cc-live-monitor && lsof -ti tcp:8787 -sTCP:LISTEN | xargs -r kill && sleep 1 && (nohup python3 server.py >> server.log 2>&1 &) && sleep 2 && lsof -ti tcp:8787 -sTCP:LISTEN && curl -s http://127.0.0.1:8787/healthz && curl -s -o /dev/null -w \"list:%{http_code}\\n\" http://127.0.0.1:8787/",
"description": "重启 8787 上的监控服务"
}结果
12347 ok list:200
子任务 · task_started重启 8787 上的监控服务
子任务 · task_notification重启 8787 上的监控服务
思考
Server restarted (pid 12347). Now fake run test.
Write a small python script? Use bash printf to append lines. But instructions say scripts go elsewhere; a simple here-doc is fine. Actually writing to runs dir — allowed for test, then remove.
Create dir with task.txt, runner.log, stream.1.jsonl.
Content should be parseable by stream_parse: `{"type":"assistant","message":{"content":[{"type":"text","text":"..."}]}}` plus a stream_event draft.
Test plan:
1. mkdir, write files (stream initial 1 event).
2. sleep ~1, curl /api/sidebar?current=name → check JSON live true.
3. Connect SSE with `curl -N --max-time 6` in background while appending lines after 1s; capture output.
4. Check output contains `event: append` or `draft` with the new text.
Because SSE endpoint streams until live ends (90s idle) — use --max-time 5.
Let me do it.
C
现在做真实假会话的自测（临时目录，测完删除）：
终端set -e
参数
{
"command": "set -e\nFAKE=~/grok-cc-task/runs/20261025-235900-phas7-fake\nmkdir -p \"$FAKE\"\nprintf '目标：Phase 7 假会话（测完删除）\\n' > \"$FAKE/task.txt\"\nprintf '[23:59:00] attempt 1 model=fake-model effort=high\\n' > \"$FAKE/runner.log\"\nprintf '%s\\n' '{\"type\":\"system\",\"subtype\":\"init\",\"model\":\"fake-model\",\"session_id\":\"s-fake\"}' '{\"type\":\"assistant\",\"message\":{\"content\":[{\"type\":\"text\",\"text\":\"第一条假消息\"}]}}' > \"$FAKE/stream.1.jsonl\"\nsleep 1\necho \"--- /api/sidebar ---\"\ncurl -s \"http://127.0.0.1:8787/api/sidebar?current=20261025-235900-phas7-fake&limit=60\" | python3 -c 'import json,sys; d=json.load(sys.stdin); print(\"current:\",d[\"current\"]); print(\"sig:\",d[\"sig\"]); print(\"has运行中:\",\"运行中\" in d[\"items\"]); print(\"foot:\",d[\"foot\"][:40])'\necho \"$FAKE\" > /tmp/phas7_fake_path",
"description": "建假 run 并检查侧栏接口"
}结果
--- /api/sidebar ---
current: {'name': '20261025-235900-phas7-fake', 'live': True, 'status': '运行中', 'severity': 'run'}
sig: 4af73d1416a1
has运行中: True
foot: <span class="side-count">共 318 个会话 · 显示最终端FAKE=$(cat /tmp/phas7_fake_path)
参数
{
"command": "FAKE=$(cat /tmp/phas7_fake_path)\n( sleep 1.5; printf '%s\\n' '{\"type\":\"stream_event\",\"event\":{\"type\":\"content_block_delta\",\"delta\":{\"type\":\"text_delta\",\"text\":\"实时追加的草稿\"}}}' >> \"$FAKE/stream.1.jsonl\"; sleep 1.5; printf '%s\\n' '{\"type\":\"assistant\",\"message\":{\"content\":[{\"type\":\"text\",\"text\":\"第二条正式消息\"}]}}' >> \"$FAKE/stream.1.jsonl\" ) &\ncurl -sN --max-time 6 \"http://127.0.0.1:8787/run/20261025-235900-phas7-fake/live?stream=stream.1.jsonl&since=0\" | head -c 1600\nwait",
"description": "连接 SSE 并追加假事件"
}结果
: retry: 2000
event: meta
data: {"note": "实时跟随中 · stream.1.jsonl", "stats": "共 0 条事件 · 实时追加中 · 源文件 0 行（跳过流式增量 0 行，坏行 0）"}
event: append
data: {"events": [{"seq": 0, "html": "<div class=\"ev-in\" data-kind=\"assistant\"><div class=\"row assistant \"><div class=\"ava ava-c\">C</div><div class=\"bubble asst-b md\"><p>第一条假消息</p></div></div></div>"}]}
event: meta
data: {"stats": "共 1 条事件 · 实时追加中 · 源文件 2 行（跳过流式增量 0 行，坏行 0）"}
event: draft
data: {"html": "<div class=\"ev-in\" data-kind=\"draft\"><div class=\"row assistant streaming\"><div class=\"ava ava-c\">C</div><div class=\"bubble asst-b md\"><p>实时追加的草稿<span class=\"cursor\">▍</span></p></div></div></div>"}
event: append
data: {"events": [{"seq": 1, "html": "<div class=\"ev-in\" data-kind=\"assistant\"><div class=\"row assistant \"><div class=\"ava ava-c\">C</div><div class=\"bubble asst-b md\"><p>第二条正式消息</p></div></div></div>"}]}
event: meta
data: {"stats": "共 2 条事件 · 实时追加中 · 源文件 4 行（跳过流式增量 0 行，坏行 0）"}
event: draft
data: {"html": ""}子任务 · task_started连接 SSE 并追加假事件
子任务 · task_notification连接 SSE 并追加假事件
思考
SSE works: draft bubble + cursor, append events, incremental.
Now verify the detail page HTML (as served) for the fake run includes AUTO=1 and sidebar poll URL; and the non-live page includes AUTO=0.
Then clean up the fake dir and confirm it disappears.
终端FAKE=$(cat /tmp/phas7_fake_path); NAME=$(basename "$FAKE")
参数
{
"command": "FAKE=$(cat /tmp/phas7_fake_path); NAME=$(basename \"$FAKE\")\necho \"--- live 页 ---\"\ncurl -s \"http://127.0.0.1:8787/run/$NAME\" | grep -o 'var AUTO = [01];\\|/api/sidebar?[^\"]*\\|id=\"side-list\"[^>]*\\|class=\"foot-hint\">[^<]*' | head -6\necho \"--- 非 live 页（一个成功会话）---\"\nOKNAME=$(ls -t ~/grok-cc-task/runs | grep 20261025-170245 | head -1)\ncurl -s \"http://127.0.0.1:8787/run/$OKNAME\" | grep -o 'var AUTO = [01];\\|class=\"side-note\">[^<]*\\|class=\"foot-hint\">[^<]*' | head -4",
"description": "检查 live 与非 live 页面输出"
}结果
--- live 页 --- id="side-list" data-sig="4af73d1416a1" data-current="20261025-235900-phas7-fake" data-live="1" class="foot-hint">只显示 run.sh 写入 ~/grok-cc-task/runs 的会话；Claude/Codex 桌面 App 直开会看不到。 /api/sidebar?q=&status=all&limit=60¤t=20261025-235900-phas7-fake var AUTO = 1; --- 非 live 页（一个成功会话）--- class="side-note">只显示 run.sh 写入 ~/grok-cc-task/runs 的会话；Claude/Codex 桌面 App 直开会看不到。 class="foot-hint">只显示 run.sh 写入 ~/grok-cc-task/runs 的会话；Claude/Codex 桌面 App 直开会看不到。 var AUTO = 0;
思考
All wiring correct.
Now clean up fake dir, verify it's gone from API, and verify that immediately after deletion the sidebar poll would drop it.
Then update PROGRESS.md and README (README describes auto refresh every 10s and route table — should add /api/sidebar). The task says update PROGRESS.md; README update is nice for accuracy (route table + status table). Let's do minimal README updates: route row for /api/sidebar, status table row for fallback, and replace "检测到运行中任务时，列表页每 10 秒自动刷新" with new behavior.
Also test the browser side? Instructions mention browser egress rules but this task doesn't require browser use. The task's self-test can be done with curl. But "侧栏每 4-5 秒 fetch" JS correctness isn't verified by curl. Could use browser skill... The runner rules are for browser tasks; using browser would need egress check first (cip.cc). That's a lot. The JS is simple; but I could validate JS syntax with node. Let's do a quick syntax check using node --check on extracted scripts. Simpler: use Python to extract the two scripts from a rendered page and run `node --check`. Node may be installed. Let's try.
Also CHAT_JS unchanged.
Let's do node syntax check.
终端FAKE=$(cat /tmp/phas7_fake_path); NAME=$(basename "$FAKE")
参数
{
"command": "FAKE=$(cat /tmp/phas7_fake_path); NAME=$(basename \"$FAKE\")\ncurl -s \"http://127.0.0.1:8787/run/$NAME\" > /tmp/phas7_page.html\npython3 - <<'PY'\nimport re\nhtml = open('/tmp/phas7_page.html', encoding='utf-8').read()\nscripts = re.findall(r'<script>(.*?)</script>', html, re.S)\nfor i, s in enumerate(scripts):\n open(f'/tmp/phas7_js_{i}.js', 'w', encoding='utf-8').write(s)\nprint(\"scripts:\", len(scripts))\nPY\nfor f in /tmp/phas7_js_*.js; do node --check \"$f\" && echo \"ok $f\"; done",
"description": "用 node 校验页面脚本语法"
}结果
scripts: 3 ok /tmp/phas7_js_0.js ok /tmp/phas7_js_1.js ok /tmp/phas7_js_2.js
思考
Syntax OK. Now test JS behavior in a headless DOM? Could use node with a fake DOM, heavy. Alternative: use the browser skill per user global rules for browser ops... The runner rules for this task only specify egress checks and LCU bounds if using LCU. The user's global CLAUDE.md says browser operations should use BrowserSkill (bsk). But this is a local page; a quick visual verification would be valuable: does the sidebar poll replace properly and does detail page auto-connect.
Given the task says self-test either with fake run dir + python (done) or selftest — we've covered. But "侧栏自动刷新" JS isn't proven at runtime. Risk of a JS bug in `apply()` (e.g. foot.innerHTML being replaced with data.foot fine).
I could simulate the poll logic in node with jsdom — probably not installed. Let me check quickly if jsdom exists... likely not.
Alternative pragmatic verification: the JS is straightforward. But one bug risk: `foot` element also has `data-sig` attribute (we set it on the aside's foot div) and the JS replaces innerHTML. Fine.
Another risk: server returns `items` HTML that on first poll differs from browser-normalized innerHTML — but we compare sig attribute, not innerHTML, so no spurious replace. Good.
One real issue: `data-sig` on `.side-list` is the *combined* sig (items+foot+live), and `foot` div also stores it. Fine.
Another: when `apply` replaces list and foot, the `data-live` attribute on the list is not updated, but JS keeps `currentLive` var, which is the source of truth. Fine.
Potential issue: server's `_send` for JSON includes `Content-Length` with charset — fine.
Performance: scan_runs every 4.5s per client. With 318 runs, os.scandir + stat all files; earlier the page served 200 in ~? Let's measure the API latency to make sure it's OK.
Then also verify the sidebar poll doesn't cause a big CPU. Measure curl time.
Let's measure.
终端for i in 1 2 3; do curl -s -o /dev/null -w "api %{time_total}s\n" "http://127.0.0.1:8787/api/sidebar?current=20261025-2…
参数
{
"command": "for i in 1 2 3; do curl -s -o /dev/null -w \"api %{time_total}s\\n\" \"http://127.0.0.1:8787/api/sidebar?current=20261025-235900-phas7-fake&limit=60\"; done\nFAKE=$(cat /tmp/phas7_fake_path); rm -rf \"$FAKE\"\nsleep 0.5\necho \"--- 删除后 ---\"\ncurl -s \"http://127.0.0.1:8787/api/sidebar?current=20261025-235900-phas7-fake&limit=60\" | python3 -c 'import json,sys; d=json.load(sys.stdin); print(\"current:\",d[\"current\"]); print(\"假会话还在侧栏:\", \"phas7-fake\" in d[\"items\"])'\nls -d ~/grok-cc-task/runs/20261025-235900-phas7-fake 2>&1 | tail -1",
"description": "测接口耗时并清理假目录"
}结果
api 0.021643s
api 0.013990s
api 0.012437s
--- 删除后 ---
current: {'name': '20261025-235900-phas7-fake', 'live': False, 'status': '', 'severity': ''}
假会话还在侧栏: False
ls: /Users/mengmeng/grok-cc-task/runs/20261025-235900-phas7-fake: No such file or directory思考
12–20ms per poll — good.
Now check the real current run appears live: `20261025-200930-cc-live-realtime`. Is the lock pid alive? Check via API.
Then update PROGRESS.md + README.
Also double check: does the real current run (this very session) show as live now? Let's query.
终端curl -s "http://127.0.0.1:8787/api/sidebar?current=20261025-200930-cc-live-realtime&limit=8" | python3 -c '
参数
{
"command": "curl -s \"http://127.0.0.1:8787/api/sidebar?current=20261025-200930-cc-live-realtime&limit=8\" | python3 -c '\nimport json,sys\nd=json.load(sys.stdin)\nprint(\"current:\", d[\"current\"])\nprint(\"counts:\", d[\"counts\"])\nimport re\nprint(\"前 3 条:\", re.findall(r\"it-title\\\">([^<]+)</div><div class=\\\"it-meta\\\"><span class=\\\"[^\\\"]+\\\"></span>(?:<span>([^<]*)</span>)?\", d[\"items\"])[:3])\n'; ps -o pid,etime,command -p 3392 2>/dev/null | tail -2",
"description": "确认当前会话状态与锁进程"
}结果
current: {'name': '20261025-200930-cc-live-realtime', 'live': True, 'status': '运行中', 'severity': 'run'}
counts: {'all': 317, 'running': 1, 'success': 213, 'failed': 16, 'other': 87}
前 3 条: [('Phase 7：修好「进行中不显示 / 不实时 / 刷新也不出新会话」。目录：~/grok-cc-ta…', '运行中'), ('在 MakerWorld 中国站收藏里找「家用药盒」', '未完成'), ('0元领取智谱 GLM Coding Plan 7天体验卡（2000积分），官方页。', '未完成')]
PID ELAPSED COMMAND
3392 03:58 /bin/bash ./run.sh cc-live-realtime prompts/07-cc-live-realtime.txt 900 180思考
Real session shows 运行中 correctly (via lock).
Now update PROGRESS.md with Phase 7 section. Read the head of PROGRESS.md for structure and add the section at the end (after Phase 6, before 后续可做?). Looking at the tail, Phase 6 is the last section before "## 后续可做（未开始）". I'll insert Phase 7 before "## 后续可做".
Let me see the exact boundary lines.
终端cd ~/grok-cc-task/cc-live-monitor && grep -n "^## \|^# " PROGRESS.md | tail -15 && head -20 PROGRESS.md
参数
{
"command": "cd ~/grok-cc-task/cc-live-monitor && grep -n \"^## \\|^# \" PROGRESS.md | tail -15 && head -20 PROGRESS.md",
"description": "查看 PROGRESS 结构"
}结果
1:# PROGRESS 3:## Phase 1 — 完成（2026-10-25） 37:## Phase 2 — 完成（2026-10-25） 98:## Phase 3 — 完成（2026-10-25） 172:## Phase 4 — 完成（2026-10-25） 276:## Phase 5 — 完成（2026-10-25） 362:## Phase 6 — 完成（2026-10-25） 418:## 后续可做（未开始） # PROGRESS ## Phase 1 — 完成（2026-10-25） 目标：能在浏览器里看到 runs 列表和单个 run 的 `task.txt` / `runner.log` 原文。 | 交付项 | 状态 | 说明 | |--------|------|------| | `runs_data.py` | ✅ 沿用 | 扫描 + 状态推导 + 安全路径，未推倒重写 | | `views.py` | ✅ 沿用 | 列表 / 详情 / 文件页渲染 | | `server.py` | ✅ 新增 | 标准库 `http.server`，只绑 `127.0.0.1:8787` | | 列表页 | ✅ | run 名、mtime、stream 数、RESULT 文件、耗时、模型、状态 | | 详情页 | ✅ | `task.txt`、`runner.log` 原文 + 目录文件清单 | | 文件页 | ✅ | 单文件原文，400 KB 截断提示 | | README / PROGRESS | ✅ | 启动命令、路由、状态判定说明 | | 服务常驻 | ✅ | `nohup python3 server.py`，日志 `server.log` | ### 验证记录 ```text
终端cd ~/grok-cc-task/cc-live-monitor && sed -n 410,420p PROGRESS.md
参数
{
"command": "cd ~/grok-cc-task/cc-live-monitor && sed -n 410,420p PROGRESS.md",
"description": "看插入位置上下文"
}结果
| `runs_data.py` | 状态文案人话化 + `state` / `severity` / `is_placeholder`；空工件目录过滤；2 小时判「已中断」 | | `views.py` | `tool_label` / `error_brief` / `_pre`；侧栏圆点与顶栏配色分级；incomplete 与草稿的思考默认折叠 | | `assets.py` | `.dot.warn` / `.st.dim` / `.tbrief`；`LIVE_JS` 结束时按人话状态上色 | | `selftest.py` | 新增出口未过 / 已中断 / 排队中 / 空目录 / 工具名 / 错误摘要 / 4KB 截断断言 | | `README.md` / `PROGRESS.md` | 状态判定表、Phase 6 说明；顺手修正过时的「只绑 127.0.0.1」描述 | **Phase 6 — 完成。** 服务已用 `nohup python3 server.py >> server.log 2>&1 &` 重启，仍绑 `0.0.0.0:8787`。 ## 后续可做（未开始） 1. **回放细节**：Edit/Write 的 diff 视图、Bash 输出按 ANSI 着色、超长结果「加载更多」。
改文件/Users/mengmeng/grok-cc-task/cc-live-monitor/PROGRESS.md
参数
{
"replace_all": false,
"file_path": "/Users/mengmeng/grok-cc-task/cc-live-monitor/PROGRESS.md",
"old_string": "**Phase 6 — 完成。** 服务已用 `nohup python3 server.py >> server.log 2>&1 &` 重启，仍绑 `0.0.0.0:8787`。\n\n## 后续可做（未开始）",
"new_string": "**Phase 6 — 完成。** 服务已用 `nohup python3 server.py >> server.log 2>&1 &` 重启，仍绑 `0.0.0.0:8787`。\n\n## Phase 7 — 完成（2026-10-25）\n\n目标：修好「进行中不显示 / 不实时 / 刷新也不出新会话」。\n\n### 根因\n\n1. `run.live` 几乎只认 `~/grok-cc-task/.browser.lock`（pid 活着 + 目录名后缀匹配）。锁被清掉、或不是 `run.sh` 起的会话，即使 `stream.*.jsonl` 还在涨，也不标「运行中」，SSE 自然也不会挂上。\n2. 首页侧栏是服务端渲染的静态 HTML，没有轮询；只有整页刷新才重扫。新会话（尤其会话列表之外的新目录）就一直看不见。\n\n### 改动\n\n1. **兜底 live 判定**（`runs_data.py`）\n - 保留原锁判定且**优先**：锁命中仍是「运行中 · pid N」。\n - 新增 `LIVE_FALLBACK_S = 90` 与 `_newest_record_age()`：当 `runner.log` 没有 `done rc=` / `exit rc=`（state 仍是 unfinished / unknown / queued），且任一 `stream*.jsonl` 或 Codex 记录的 mtime 在 **90 秒**内 → `live=True`、`status=运行中`、`state=running`。\n - `status_detail` 记「记录 N 秒前还在更新」，`severity`/`category` 自动跟着变绿、算 running、参与置顶。\n - 有 `done rc=` 的 run 一律不参与兜底，所以两小时前中断的不会被重新点亮；90 秒不写就会自己退回「未结束」，SSE 也随之结束。\n\n2. **侧栏自动刷新**（`views.py` + `server.py` + `assets.py`）\n - 新增 `GET /api/sidebar?q=&status=&limit=¤t=`：返回 `{sig, items, foot, total, counts, current{name,live,status,severity}}`，`items` 只含条目片段（不含外壳）。\n - `views.sidebar_items()` / `sidebar_foot()` / `sidebar_sig()` 抽出来，整页渲染与接口共用同一套 HTML，避免两处样式漂移；`md5(items+foot+live)` 作为 `sig`，内容没变就不动 DOM。\n - `assets.SIDEBAR_JS` 每 **4.5 秒**轮询一次；只有 `sig` 变化才替换 `.side-list` / `.side-foot`，替换前后保存/恢复 `scrollTop`，当前会话高亮由服务端按 `current` 参数重新打 `.on`，所以选中态和滚动位置都不丢。切回标签页（`visibilitychange`）立刻补一次。\n\n3. **详情页就地接上实时**\n - `LIVE_JS` 拆成可启动模块：脚本一直在页面里（停在最后一页的 Claude 会话都会注入），`__AUTO__` 决定是否立即连。\n - 侧栏轮询发现「当前会话 live 由 false 变 true」→ 调 `window.__ccLive.start()`：顶栏状态改「运行中」、页脚提示「已开始实时」、连 `EventSource`；上一次已结束时留下的「不完整」气泡会先清掉，避免和后续事件重复。\n - SSE 响应头保持 `Cache-Control: no-cache, no-store` + `X-Accel-Buffering: no`，nginx 反代不缓冲；草稿气泡与光标逻辑未动。\n\n4. **说明文字**：侧栏底部 + 主区页脚各一行小字——`只显示 run.sh 写入 ~/grok-cc-task/runs 的会话；Claude/Codex 桌面 App 直开会看不到。`\n\n### 验收\n\n```text\n$ curl /api/sidebar?current=<fake> # 假 run 刚写过 stream\ncurrent: {'name': '...', 'live': True, 'status': '运行中', 'severity': 'run'}\nitems 里出现「运行中」，sig/foot 齐全；同一接口 12–20 ms\n\n$ curl -N /run/<fake>/live?stream=stream.1.jsonl&since=0\nevent: append → 第一条假消息\nevent: draft → 实时追加的草稿 + 光标\nevent: append → 第二条正式消息\n```\n\n- 假 run 目录（`runs/20261025-235900-phas7-fake`）删掉后，接口立刻回 `live: False` 且条目消失。\n- 真实会话 `20261025-200930-cc-live-realtime`（锁命中）仍为「运行中」；`20261025-170245-cc-live-clean-ui` 这类已结束页面注入 `var AUTO = 0;`（不白连）。\n- 三个内联脚本都过 `node --check`；`python3 selftest.py` 全绿（新增兜底 live / 十分钟不动不算 live / 已结束不误判 / 接口集成断言）。\n\n### 变更文件\n\n| 文件 | 变化 |\n|------|------|\n| `runs_data.py` | `LIVE_FALLBACK_S` + `_newest_record_age()`；锁之外的 90 秒兜底 live |\n| `server.py` | 新增 `GET /api/sidebar` 路由与 `_api_sidebar()` |\n| `views.py` | 侧栏片段化（`sidebar_items` / `sidebar_foot` / `sidebar_sig` / `sidebar_url`）；恒注入 `LIVE_JS`（`__AUTO__`）；页脚说明 |\n| `assets.py` | 新增 `SIDEBAR_JS`；`LIVE_JS` 改为可 `start()`；`.side-note` / `.foot-hint` 样式 |\n| `selftest.py` | 新增第 12/13 个 fixture 与第 [7] 组断言（含起临时 HTTP 服务打接口） |\n| `README.md` / `PROGRESS.md` | 路由表、状态判定、自动刷新说明；Phase 7 记录 |\n\n**Phase 7 — 完成。** 服务已重启（`lsof -ti tcp:8787 -sTCP:LISTEN | xargs kill` 后 `nohup python3 server.py >> server.log 2>&1 &`），仍绑 `0.0.0.0:8787`。\n\n## 后续可做（未开始）"
}结果
The file /Users/mengmeng/grok-cc-task/cc-live-monitor/PROGRESS.md has been updated successfully.
思考
Now README updates:
1. Route table: add `/api/sidebar`.
2. Status table: add fallback row.
3. Replace "检测到运行中任务时，列表页每 10 秒自动刷新；详情页不再整页刷新，改由 SSE 增量推送。" with new text.
4. Phase list at top: add Phase 7 bullet.
Let me look at the README lines for these.
The phase bullets at top end with Phase 6. Add Phase 7.
Route table near line ~50: add row after `/?status=...`.
Status table: add after the lock row.
Find exact strings.
终端cd ~/grok-cc-task/cc-live-monitor && grep -n "Phase 6\|status=running\|browser.lock\|每 10 秒" README.md
参数
{
"command": "cd ~/grok-cc-task/cc-live-monitor && grep -n \"Phase 6\\|status=running\\|browser.lock\\|每 10 秒\" README.md",
"description": "定位 README 待改处"
}结果
10:- **Phase 6**：可读性——侧栏与顶栏状态改说人话（出口未过 / 未完成 / 已中断 / 排队中 / 无记录），只有真失败才给红点；工具名映射成中文（调用了 终端 · 浏览器 · 读文件），出错时摘要一行短句，展开区超 4KB 自动截断；既没有 `runner.log` 也没有 jsonl 的空工件目录不再出现在列表里。 51:| `/?status=running\|success\|failed\|all` | 仍然支持状态过滤（无 UI，给脚本用），非法值回落 `all` | 109:| 有 `.browser.lock` 且 pid 存活、run 名匹配 | 运行中 | 绿（呼吸） | 116:检测到运行中任务时，列表页每 10 秒自动刷新；详情页不再整页刷新，改由 SSE 增量推送。 135:全部 fixture 建在临时目录，不碰真实 runs；覆盖状态筛选、关键字搜索、置顶顺序、被杀运行的不完整气泡、Codex 映射与未知记录降级，以及聊天界面（侧栏、task 气泡、Markdown、工具行标记、思考折叠、噪声剥离）。Phase 6 起额外覆盖状态文案映射、空工件目录过滤、圆点分级、工具名映射、错误摘要与 4KB 截断。加 `--keep` 保留 fixture，方便起服务手测。
终端cd ~/grok-cc-task/cc-live-monitor && python3 - <<'PY'
参数
{
"command": "cd ~/grok-cc-task/cc-live-monitor && python3 - <<'PY'\nimport io\np = 'README.md'\ns = open(p, encoding='utf-8').read()\n\ns = s.replace(\n\"- **Phase 6**：可读性——\",\n\"- **Phase 7**：进行中不再靠锁——`stream.*.jsonl` 90 秒内还在长就算「运行中」（锁仍优先），侧栏每 4.5 秒拉 `/api/sidebar` 增量刷新（保留选中与滚动），详情页发现该会话开始跑就地接上 SSE。\\n- **Phase 6**：可读性——\",\n1)\n\ns = s.replace(\n\"| `/?status=running\\\\|success\\\\|failed\\\\|all` | 仍然支持状态过滤（无 UI，给脚本用），非法值回落 `all` |\",\n\"| `/?status=running\\\\|success\\\\|failed\\\\|all` | 仍然支持状态过滤（无 UI，给脚本用），非法值回落 `all` |\\n| `/api/sidebar?q=&status=&limit=¤t=<run>` | 侧栏轮询接口：返回 `sig` + 条目 HTML 片段 + 页脚 + 当前会话的 `live/status`（4.5 秒一次，内容没变不换 DOM） |\",\n1)\n\ns = s.replace(\n\"| 有 `.browser.lock` 且 pid 存活、run 名匹配 | 运行中 | 绿（呼吸） |\",\n\"| 有 `.browser.lock` 且 pid 存活、run 名匹配 | 运行中 | 绿（呼吸） |\\n| 没有锁，但 `stream*.jsonl` / Codex 记录 90 秒内还在长，且日志没有结束行 | 运行中（兜底） | 绿（呼吸） |\",\n1)\n\ns = s.replace(\n\"检测到运行中任务时，列表页每 10 秒自动刷新；详情页不再整页刷新，改由 SSE 增量推送。\",\n\"侧栏每 4.5 秒拉一次 `/api/sidebar`，只有 `sig` 变了才替换列表（滚动位置与当前选中高亮都保留），新出现的会话不用整页刷新就能看到。详情页不再整页刷新，改由 SSE 增量推送；如果打开时它还没在跑，之后开始跑会就地连上 SSE 并在页脚提示「已开始实时」。\\n\\n列表只扫 `~/grok-cc-task/runs`（`run.sh` 的产出目录）：Claude 桌面 App / Codex App 里直接开的对话不写这里，所以看不到。\",\n1)\n\ns = s.replace(\n\"Phase 6 起额外覆盖状态文案映射、空工件目录过滤、圆点分级、工具名映射、错误摘要与 4KB 截断。\",\n\"Phase 6 起额外覆盖状态文案映射、空工件目录过滤、圆点分级、工具名映射、错误摘要与 4KB 截断；Phase 7 起覆盖锁丢失时的兜底 live、十分钟没动不算 live、已结束不误判，并起一个临时 HTTP 服务验证 `/api/sidebar`。\",\n1)\n\nopen(p, 'w', encoding='utf-8').write(s)\nprint(\"done\")\nPY\ngrep -n \"Phase 7\\|api/sidebar\\|90 秒\\|4.5 秒\" README.md | head",
"description": "更新 README 说明"
}结果
done 10:- **Phase 7**：进行中不再靠锁——`stream.*.jsonl` 90 秒内还在长就算「运行中」（锁仍优先），侧栏每 4.5 秒拉 `/api/sidebar` 增量刷新（保留选中与滚动），详情页发现该会话开始跑就地接上 SSE。 53:| `/api/sidebar?q=&status=&limit=¤t=<run>` | 侧栏轮询接口：返回 `sig` + 条目 HTML 片段 + 页脚 + 当前会话的 `live/status`（4.5 秒一次，内容没变不换 DOM） | 112:| 没有锁，但 `stream*.jsonl` / Codex 记录 90 秒内还在长，且日志没有结束行 | 运行中（兜底） | 绿（呼吸） | 119:侧栏每 4.5 秒拉一次 `/api/sidebar`，只有 `sig` 变了才替换列表（滚动位置与当前选中高亮都保留），新出现的会话不用整页刷新就能看到。详情页不再整页刷新，改由 SSE 增量推送；如果打开时它还没在跑，之后开始跑会就地连上 SSE 并在页脚提示「已开始实时」。 140:全部 fixture 建在临时目录，不碰真实 runs；覆盖状态筛选、关键字搜索、置顶顺序、被杀运行的不完整气泡、Codex 映射与未知记录降级，以及聊天界面（侧栏、task 气泡、Markdown、工具行标记、思考折叠、噪声剥离）。Phase 6 起额外覆盖状态文案映射、空工件目录过滤、圆点分级、工具名映射、错误摘要与 4KB 截断；Phase 7 起覆盖锁丢失时的兜底 live、十分钟没动不算 live、已结束不误判，并起一个临时 HTTP 服务验证 `/api/sidebar`。加 `--keep` 保留 fixture，方便起服务手测。
思考
Also README "Phase 5 自测" mention in file table for selftest.py — minor, skip.
Now final verification: rerun selftest after all edits (already ran post-edit? selftest ran before README/PROGRESS, code unchanged since). Let me rerun quickly plus py_compile all, and confirm server still healthy and serving new code (server restarted before README edits — code unchanged after restart? I edited views/server/assets BEFORE restart? Let's check order: I edited runs_data, views, server, assets, selftest → then ran selftest → then restarted server → then fake test → then PROGRESS/README. So running server has all code. Good.
But wait — I restarted the server before the selftest? Order: selftest run (pass) → restart → fake test. Yes, restart happened after code edits. Good.
Final: run selftest once more and healthz. Also check server.log tail for errors from the fake test.
One more consideration: the detail page injects SIDEBAR_JS everywhere including the file page? page_file is separate, no. Fine.
Edge: `views.page_chat` called with run=None → sidebar_js still injected; `sidebar_url` with current "" → find_run("") returns None. Fine.
Edge: `apply()` in SIDEBAR_JS replaces `.side-list` innerHTML. If user has keyboard focus inside a link, focus lost — minor.
Edge: The list page uses root URL `/`; when polling server uses `current` = latest run name. If a newer run appears, the sidebar shows it but the main pane still shows the old one. That's acceptable (user can click). Actually on `/` the main pane is the latest at load; new run appears in sidebar with a click. Fine. Could auto-open but spec doesn't ask.
Edge: `_api_sidebar` calls scan_runs which builds every run; 12-20ms measured.
Now check server.log for exceptions.
终端cd ~/grok-cc-task/cc-live-monitor && python3 selftest.py 2>&1 | tail -3 && python3 -m py_compile runs_data.py views.py …
参数
{
"command": "cd ~/grok-cc-task/cc-live-monitor && python3 selftest.py 2>&1 | tail -3 && python3 -m py_compile runs_data.py views.py server.py assets.py selftest.py && echo \"compile ok\" && echo \"--- server.log 最近错误 ---\" && grep -iE \"traceback|error|exception\" server.log | tail -5; echo \"--- healthz ---\"; curl -s http://127.0.0.1:8787/healthz",
"description": "最终自测与日志检查"
}结果
ok healthz 正常 PASS — Phase 7 自测全部通过 compile ok --- server.log 最近错误 --- [25/Oct/2026 19:26:57] "GET /run/20261025-121827-scnet-setpass-rebind/file/scnet-setpass-04-otp-error.png HTTP/1.1" 200 - --- healthz --- ok
思考
The grep matched a URL containing "error" — not a real error. Good.
Everything done. Let me clean up temp files (/tmp/phas7_*). Also verify no leftover fake dir (done).
One last sanity: check the running server serves the new `/api/sidebar` (yes tested after restart).
Also worth verifying that the detail page of a non-live, codex-only run doesn't inject LIVE_JS incorrectly — can_live requires stream_files, codex-only has none. Fine.
Clean temp files.
Then final summary in Chinese with 直接执行 + 深度交互 per user global rules.
Actually, let me double-check one behavior: SSE idle-close and auto-restart interplay. When run.live fallback expires after 90s silence, SSE sends `closed` with reason = current.status. But current.status for a still-unfinished run would be "未结束". Then later live becomes true again → sidebar calls start() → clears incomplete bubble and reconnects. Good.
But there's a subtle bug: `start()` checks `if (source) return;`. After `closed`, source=null, so OK.
Another: after `closed`, `stopped=true`. start() resets. Good.
And `setNote('已开始实时')` then SSE `meta` overwrites with "实时跟随中 · file". Fine.
Let me also consider the case where the page loaded non-live and the run is a codex-only run (no LIVE_JS): sidebar live true → `window.__ccLive` undefined → nothing. Fine, sidebar still updates.
Cleanup and summarize.
终端rm -f /tmp/phas7_*.js /tmp/phas7_page.html /tmp/phas7_fake_path; ls ~/grok-cc-task/runs | grep -c phas7 || true; cd ~/g…
参数
{
"command": "rm -f /tmp/phas7_*.js /tmp/phas7_page.html /tmp/phas7_fake_path; ls ~/grok-cc-task/runs | grep -c phas7 || true; cd ~/grok-cc-task/cc-live-monitor && ls -l --time-style=+%H:%M runs_data.py server.py views.py assets.py selftest.py PROGRESS.md README.md 2>/dev/null || ls -lT runs_data.py server.py views.py assets.py selftest.py PROGRESS.md README.md",
"description": "清理临时文件并确认改动文件"
}结果
0 -rw-r--r--@ 1 mengmeng staff 27243 10月 25 20:11:51 2026 assets.py -rw-r--r--@ 1 mengmeng staff 36850 10月 25 20:13:46 2026 PROGRESS.md -rw-r--r--@ 1 mengmeng staff 11061 10月 25 20:13:56 2026 README.md -rw-r--r--@ 1 mengmeng staff 18175 10月 25 20:10:38 2026 runs_data.py -rw-r--r--@ 1 mengmeng staff 24632 10月 25 20:12:41 2026 selftest.py -rw-r--r--@ 1 mengmeng staff 16606 10月 25 20:12:01 2026 server.py -rw-r--r--@ 1 mengmeng staff 26370 10月 25 20:11:18 2026 views.py
C
直接执行
Phase 7 已按你给的根因改完并跑通，服务已重启（0.0.0.0:8787，pid 12347）。
1. 扩大 live 判定（runs_data.py:34、runs_data.py:396-419）
- 锁判定保留且优先。
- 新增
LIVE_FALLBACK_S = 90+_newest_record_age()：日志没有done rc=/exit rc=（state 仍为 unfinished/unknown/queued），且任一stream*.jsonl或 Codex 记录 90 秒内还在长 →live=True、运行中、state=running，详情里记「记录 N 秒前还在更新」。 - 有结束行的 run 一律不参与兜底，两小时前中断的不会被重新点亮；90 秒不写自动退回「未结束」。
2. 侧栏自动刷新
- 新接口
GET /api/sidebar?q=&status=&limit=¤t=→{sig, items, foot, total, counts, current{live,status}}，只回条目片段。 views.py把侧栏拆成sidebar_items / sidebar_foot / sidebar_sig / sidebar_url，整页与接口共用同一套 HTML。assets.SIDEBAR_JS每 4.5 秒拉一次；sig不变就不动 DOM，替换前后保存/恢复.side-list的scrollTop，当前高亮由服务端按current重新打.on；切回标签页立刻补一次。
3. 详情页就地接实时：LIVE_JS 改成可 start() 的模块，停在最后一页的 Claude 会话都注入（__AUTO__ 控制是否立刻连）；侧栏轮询发现该会话 live 由 false→true 就调 __ccLive.start()：顶栏改「运行中」、页脚提示「已开始实时」、连 SSE，并清掉上一次结束时留下的「不完整」气泡避免重复。SSE 头仍是 X-Accel-Buffering: no / Cache-Control: no-cache, no-store。
4. 说明文字：侧栏底部 + 主区页脚都加了 只显示 run.sh 写入 ~/grok-cc-task/runs 的会话；Claude/Codex 桌面 App 直开会看不到。
验收记录
- 假 run（
runs/20261025-235900-phas7-fake）：/api/sidebar回live: True / 运行中；SSE 实测收到append（第一条）→draft（草稿+光标）→append（第二条）；删目录后接口立刻live: False、条目消失。目录已删除。 - 接口耗时 12–20 ms；三个内联脚本过
node --check。 python3 selftest.py全绿，新增第 12/13 个 fixture（锁丢失兜底、十分钟没动不算 live、已结束不误判）和第 [7] 组断言（含起临时 HTTP 服务打/api/sidebar）。- 真实会话
20261025-200930-cc-live-realtime仍显示「运行中」。 - PROGRESS.md 已加「Phase 7 — 完成」，README 的路由表/状态表/刷新说明同步更新。未动
run.sh。
停在等你。
深度交互
一个有争议的点：90 秒阈值本身会制造「假结束」。长时间工具调用（比如一次 3 分钟的构建）期间 jsonl 不涨，run 会先退回「未结束」、SSE 推 closed，等又开始写才由侧栏重新拉起来。现在的处理是「自动重连 + 清掉旧的不完整气泡」，代价是这一小段会闪一下状态。更干净的做法是判活证据分级：锁 > stream mtime > 子进程存活（pgrep -f <run 名>），三者任一成立就算在跑，90 秒只作为最后的兜底。代价是多一次进程扫描，属于「更准但更重」，这次按你指定的最小改动没做。
第二个值得质疑的是首页默认打开「最新一条」：侧栏现在能实时冒出新会话，但右侧主区还停在加载时那条，新会话只出现在左边、需要手动点。要不要改成「发现更新的会话且用户没在滚动时，自动切到新会话」？这涉及「用户正在读旧会话时被抢走注意力」的风险，我倾向不做，除非你确认这就是你要的「刷新也不出新会话」的完整语义。
运行结果 · 282 秒 · 45 轮 · $2.7952
直接执行
Phase 7 已按你给的根因改完并跑通，服务已重启（0.0.0.0:8787，pid 12347）。
1. 扩大 live 判定（runs_data.py:34、runs_data.py:396-419）
- 锁判定保留且优先。
- 新增
LIVE_FALLBACK_S = 90+_newest_record_age()：日志没有done rc=/exit rc=（state 仍为 unfinished/unknown/queued），且任一stream*.jsonl或 Codex 记录 90 秒内还在长 →live=True、运行中、state=running，详情里记「记录 N 秒前还在更新」。 - 有结束行的 run 一律不参与兜底，两小时前中断的不会被重新点亮；90 秒不写自动退回「未结束」。
2. 侧栏自动刷新
- 新接口
GET /api/sidebar?q=&status=&limit=¤t=→{sig, items, foot, total, counts, current{live,status}}，只回条目片段。 views.py把侧栏拆成sidebar_items / sidebar_foot / sidebar_sig / sidebar_url，整页与接口共用同一套 HTML。assets.SIDEBAR_JS每 4.5 秒拉一次；sig不变就不动 DOM，替换前后保存/恢复.side-list的scrollTop，当前高亮由服务端按current重新打.on；切回标签页立刻补一次。
3. 详情页就地接实时：LIVE_JS 改成可 start() 的模块，停在最后一页的 Claude 会话都注入（__AUTO__ 控制是否立刻连）；侧栏轮询发现该会话 live 由 false→true 就调 __ccLive.start()：顶栏改「运行中」、页脚提示「已开始实时」、连 SSE，并清掉上一次结束时留下的「不完整」气泡避免重复。SSE 头仍是 X-Accel-Buffering: no / Cache-Control: no-cache, no-store。
4. 说明文字：侧栏底部 + 主区页脚都加了 只显示 run.sh 写入 ~/grok-cc-task/runs 的会话；Claude/Codex 桌面 App 直开会看不到。
验收记录
- 假 run（
runs/20261025-235900-phas7-fake）：/api/sidebar回live: True / 运行中；SSE 实测收到append（第一条）→draft（草稿+光标）→append（第二条）；删目录后接口立刻live: False、条目消失。目录已删除。 - 接口耗时 12–20 ms；三个内联脚本过
node --check。 python3 selftest.py全绿，新增第 12/13 个 fixture（锁丢失兜底、十分钟没动不算 live、已结束不误判）和第 [7] 组断言（含起临时 HTTP 服务打/api/sidebar）。- 真实会话
20261025-200930-cc-live-realtime仍显示「运行中」。 - PROGRESS.md 已加「Phase 7 — 完成」，README 的路由表/状态表/刷新说明同步更新。未动
run.sh。
停在等你。
深度交互
一个有争议的点：90 秒阈值本身会制造「假结束」。长时间工具调用（比如一次 3 分钟的构建）期间 jsonl 不涨，run 会先退回「未结束」、SSE 推 closed，等又开始写才由侧栏重新拉起来。现在的处理是「自动重连 + 清掉旧的不完整气泡」，代价是这一小段会闪一下状态。更干净的做法是判活证据分级：锁 > stream mtime > 子进程存活（pgrep -f <run 名>），三者任一成立就算在跑，90 秒只作为最后的兜底。代价是多一次进程扫描，属于「更准但更重」，这次按你指定的最小改动没做。
第二个值得质疑的是首页默认打开「最新一条」：侧栏现在能实时冒出新会话，但右侧主区还停在加载时那条，新会话只出现在左边、需要手动点。要不要改成「发现更新的会话且用户没在滚动时，自动切到新会话」？这涉及「用户正在读旧会话时被抢走注意力」的风险，我倾向不做，除非你确认这就是你要的「刷新也不出新会话」的完整语义。